Can someone please tell me which wires should be power or ground to retrofit these 2007 D2 A8L calipers to another car? Which of the smaller wires are signal/trigger wires to activate the electromagnetic solenoid and clamp the rotor? Thank you
I'm dealing with a 2018 outlander with epb the actuator is fried. And would you know no parts available at all. My question can you just purchase the motor or are most these actuators the same to interchange. Any help I'd appreciate it. Thanks
Bearings Drive cog needle bearing; isd 6mm x osd10mm x w9mm. Known as HK0609 Drive cog main bearing; isd 6mm x osd 19mm x w6mm. Known as 626Z Wobble gear bearing (x2); iso15mm x osd24mm x w5mm. Known as 6802Z isd = inside dimeter osd = outside diameter. w = width
Great video! Thank you! can you give parameters for the bearings and for the belt? If the motor needs to change, do you have an item number for that Johnson motor? :) Thanks a lot!
Very interesting video, thank you for uploading.
Thank you for commenting
Hi, what is the external diameter of new hollow tube?
Can someone please tell me which wires should be power or ground to retrofit these 2007 D2 A8L calipers to another car? Which of the smaller wires are signal/trigger wires to activate the electromagnetic solenoid and clamp the rotor? Thank you
Interesting video. Mine issue is that the motor does not stop to screw in the piston. Do you think i can fix it ?
You will have to take it apart and look to see what the problem is.
What was wrong with it? Only the crack in the plastic?
Bearings were siezed so slowing it down and making it noisy. Plastic crack was cause or result. Who knows.
I'm dealing with a 2018 outlander with epb the actuator is fried. And would you know no parts available at all. My question can you just purchase the motor or are most these actuators the same to interchange. Any help I'd appreciate it. Thanks
For VW I buy second hand motors and strip them for parts. That is how I get a replacement electric motor.
Could tell me what is size of big bearing , code ?? please , Thank you
Bearings
Drive cog needle bearing; isd 6mm x osd10mm x w9mm. Known as HK0609
Drive cog main bearing; isd 6mm x osd 19mm x w6mm. Known as 626Z
Wobble gear bearing (x2); iso15mm x osd24mm x w5mm. Known as 6802Z
isd = inside dimeter
osd = outside diameter.
w = width
Great video! Thank you! can you give parameters for the bearings and for the belt? If the motor needs to change, do you have an item number for that Johnson motor? :) Thanks a lot!
Bien
Thank you.
👍 🇹🇷
Preaty sure this is not an original servo. The original will never ever ever open That eazy! Ask me how i know...
It is original and they do open ok if you take care. I have repaired many.
Has your tongue been cut out?
Ha Ha! Nice comment.