Thank you so much! This worked perfectly and saved us both a trip to the technician and some money. Thank you again 🙂 This version improves clarity and flow.
Thank you very much. I refilled the black ink in my printer and for some reason the printer couldn’t configure on its own. I tried everything but it didn’t work. Then I watched your video and tried ink flush and it worked. THANK YOU❤❤❤❤❤
I have an error code 5200 when trying to print. I've done the cleaning and flushed the ink. And when I do nozzle check it doesn't want to print and the error code 5200 just comes up again. My cartridges are still like three quarters full, so I dunno how to sort out the problem
If the error still recurs after taking the above actions, you may be able to resolve it by replacing the print heads. You can contact your local service center for further assistance.
@@MrPrintGuyDIY thank you for your time replying. I understood that. I don't care about lost ink. I care about the place where it went :) Should I expect leak from somewhere? Should I clean something?
@janglaveev8511 there is an ink pad where the ink goes. It has a certain capacity and if it gets full it will raise an error for the pad. The ink can not leak out of the printer.
This operation can not damage the printer. The operation needs bigger amount of ink than normal printing, and the waste ink goes into the maintenance box. This box is filling with waste ink every time we print or clean the printhead. It is a spare part, and whet it gets full you will get an error for replacing it. And again I am telling you - the operation can not damage your printer. Good luck!
@@MrPrintGuyDIY nevermind I found the dots, Here's my issue The photo quality looks washed out I did all the cleaning options and ink flushed, I did the ink flush because the pipe with black ink was empty. I did a nozzle check after the flush and I found magenta had white lines in it. Then all the cleaning and a nozzle check after that Now only black has some issues the grid has some lines missing but the other colors are fine.
@@MrPrintGuyDIY one last thing The tests prints are done on normal plain paper since that shows the issues such as lines and washed out colors. On glossy photo paper I don't see that issue
I think this is about the most useful video on RUclips. I fixed my printer! Thank you so much!
Thank you for sharing! I couldn't find raw solution for my model anywhere before your video - big thanks to you!!
Thank you so much! This worked perfectly and saved us both a trip to the technician and some money. Thank you again 🙂
This version improves clarity and flow.
Thank you very much. I refilled the black ink in my printer and for some reason the printer couldn’t configure on its own. I tried everything but it didn’t work. Then I watched your video and tried ink flush and it worked. THANK YOU❤❤❤❤❤
Great! 😃
Thanks .. you just saved my life 😢
I'm so grateful dude, thanks a lot
Whenever I wanted to print red, it comes out a totally different color from red. YOU fixed my printer not me 😅❤❤
Found for useful and my problem resolved by your help
Thank you for sharing your knowledge and making this valuable video. Watching your video was worth every second of my time. Thanks again.
Thank you! ☺️
მადლობა ❤❤❤❤🙏 გავაკეთე ❤❤❤❤. გაიხარეთ ❤
Thanks i fix my Canon printer colour issue by follow your video it was very helpful
MERCIIIIIIII ça m'a réglé le problème :D :D
magnifique ça m'a réglé le problème rapidement ! super
Good Video 👍
THANK YOU for this video!
Thank you so much, it was very helpful!
Thanks Man, it worked
When i do an ID photocopy it appears very dark...how can I solve the issue
Maybe it's a security issue for these devices, along with money copying.
When I do the nozzle check the colors on the side where it says the bk c m and y are green
If the nozzle check pattern printout is ok don't worry about the green tabs.
I have an error code 5200 when trying to print.
I've done the cleaning and flushed the ink.
And when I do nozzle check it doesn't want to print and the error code 5200 just comes up again.
My cartridges are still like three quarters full, so I dunno how to sort out the problem
If the error still recurs after taking the above actions, you may be able to resolve it by replacing the print heads. You can contact your local service center for further assistance.
Thank you very much 👍
wow, that took a lot of ink. where did it go? BTW it solved my problem so thank you !
This process needs a lot of ink for flushing the tubes and clearing the nozzles.
@@MrPrintGuyDIY thank you for your time replying. I understood that. I don't care about lost ink. I care about the place where it went :) Should I expect leak from somewhere? Should I clean something?
@janglaveev8511 there is an ink pad where the ink goes. It has a certain capacity and if it gets full it will raise an error for the pad. The ink can not leak out of the printer.
You are the best, thanks
Does this operation damage the printer if we do it more than four times?
This operation can not damage the printer. The operation needs bigger amount of ink than normal printing, and the waste ink goes into the maintenance box. This box is filling with waste ink every time we print or clean the printhead. It is a spare part, and whet it gets full you will get an error for replacing it. And again I am telling you - the operation can not damage your printer. Good luck!
Thank you thank you thank you!!
Thanks
Thanks a lot
I try it now and it didn’t work! , its show me that the printer can not do the job right know !!
Thank you!!!
How often do u recommend ink flush? It says it consumes a lot of ink
Hello friend! You have to perform ink flush only in case of empty pipes and/or printing defects.
Where is that dot that the tank must be refilled to
@ThatOneOddGuy you mean where are the ink tanks?
@@MrPrintGuyDIY nevermind I found the dots,
Here's my issue
The photo quality looks washed out
I did all the cleaning options and ink flushed,
I did the ink flush because the pipe with black ink was empty.
I did a nozzle check after the flush and I found magenta had white lines in it.
Then all the cleaning and a nozzle check after that
Now only black has some issues the grid has some lines missing but the other colors are fine.
@@MrPrintGuyDIY one last thing The tests prints are done on normal plain paper since that shows the issues such as lines and washed out colors. On glossy photo paper I don't see that issue
Please I couldn't see the buttons clearly, I tried to zoom but still couldn't see the instructions. Could you please write out the steps🙏🙏🙏