Hands down one of the best if not the best tutorial I have ever seen on matters such as this! Comprehensive, thorough, patiently explained, and a smashing success! Smashing is the key word as it kept me from smashing my printer with a sledge hammer when all else failed! Just kidding...lol! Totally Awesome Video, and stars across the board!
After wasting a ton of ink cleaning as suggested by canon and reading so many people not finding a fix I was thrilled that this worked. I’m happy my machine won’t be going to the landfill and I found this video.
Absolutely spot on. Fixed my years old MX922 printhead problems. Prints just like it was new. Follow the instructions completely. Especially hooking a syringe and tubing to the printhead to flush out the old dried ink - Pure Genius!! I got a kids/baby oral syringe (10ml) off amazon for a few bucks and hooked up some old tubing I had around the house. Just a fantastic tutorial - 27 stars!!!
Thank you so much! I dug my printer out of storage after a few years to find it wasn't printing any black, but was able to resurrect it. I had no confidence this would work and probably woudn't have even tried it if it weren't for this nice, encouraging video. Cheers
I was a little skeptical, that this was going to save my little terrific printer. However, I followed the directions exactly, got out the little paintbrush, got out a syringe that actually fit and lo and behold, my great six year old printer is now completely functional once again. The directions are actually very simple, and I followed them exactly. There was nothing I had to buy or obtain in anyway to solve this problem and my little canon MX 920 is fully functional once again. Thank you so much to the person who put this video together, it saved me from tossing out a perfectly good printer and spending a ton of money and something that probably would not be any better! Ginny Keller
Worked like a charm. Thanks. Just a point of reference for anyone following along, make sure to pull the bottom of the print head carriage out when trying to put the print head back in. I made the mistake of not pulling it out for 10 very frustrating minutes.
Dude.... you're a flippin lifesaver. I followed your instructions to the T, and everything I'd back working. Thank you! Ps.... a bit of positive feedback; I clicked on your video precisely because of your thumbnail with the "from this, to this" images. Good work.
So glad to find this helpful video! Thanks for the easy-to-follow and clear instructions! I had to print the pattern a couple of times and then run the "clean clogged nozzle" function again, but now it is working beautifully!
🤯🎉Dude! I really thought I was going to have to buy a whole new printer, but another one of your videos brought me here - I have a G7020, but just a few minutes in a solution with warm water & alcohol (had no windex) and I’ve already seen MASSIVE improvement, the nozzle check prior (even with deep cleanings) barely printed anything beyond a third of cyan and strip of yellow ONLY - now I have damn near a full nozzle check test printed! I’m going to do another machine deep clean or leave it in the solution longer, but you really saved me $300. THANK YOU!
Was about to pull the trigger on a new printer but thought I'd give this a shot on a different canon printer. The syringe element seemed to make the difference, works like new now, thank you!
On my Canon MX922 the text prints blurry and is really hard to read. Would this be because I need to clean the print heads? I tried the regular cleaning process from the menu display, but it didn’t help.Thank you. Your videos are great!
Thankyou so much, your video solved my printer problem 😊 soaking it in a glass cleaner and bit of ammonia plus the syringe thing was a helpful trick for me.
Thanks for this useful video! In my case I was getting no cyan color at all, and removing and cleaning the print head would not fix the problem. What fixed the issue was the syringe trick shown in your video! Clever idea!
Hi. I'm sorry you are having trouble with your printer. Try soaking the bottom of the printhead in about 1/8th of an inch in windex for a few hours or overnight.
I just got a support code B200 on Canon PIXMA MX922 Printer. I found several videos that explained the same thing. As you are doing to your printer, have you had this occurred again to your printer? Since you put this video out a year ago. How often have you done this since then? Your information would be greatly appreciated.
It was printing a million fine lines. Fixed problem. Worked perfectly. Pay close attention to putting print head back in. You’ll thank me. 😊 Cleaning encoder not needed.
I just went through the whole tutorial (great tutorial) but I'm still having issues with the regular black (not PGBK) print head. I can visually see the dried ink clogging the nozzle but it just won't come out. Are there any other things I could try for extremely stubborn ink? I got the while printer at a thrift store for like $10 so if I need to buy a new print head it's whatever.
If my printer is still shooting out blank pages after doing this, and getting it so clean the water is clear, do you have a video on what to do for that situation? (put new ink in low cartridges - still nothing) Thank you very much for this video.
Hi, yes, I apologize for a late reply, but I posted a video yesterday and the first part of the video, first 6 minutes approximately, the technique is what you can use for an EcoTank printer like g3410. ruclips.net/video/vNHOaATPloU/видео.htmlsi=jZWQufJ-_Wj-Z6fo
Will this work for blurred text? I’m going to try cleaning the head as suggested but my text is coming out blurry on some lines and clear on others. So frustrating.
Hello 303electronics, I followed all your cleaning steps to remove B200 error from other video but I got a problem that all cartridge lamps are not lit anymore and I got error 1405 and then 1660. I then checked the cartridge pin contact after cleaning the print head but I got no voltage anymore. I did measure the pin contact before the cleaning, if I remember correctly, the voltage on the left pin 1-2 is around 2.76v and the right pin 3-5 is around
Great guide. Was able to clean my print head completely but still having an issue. You have any idea why print head would draw in the ink but then print absolutely nothing on the paper from either paper tray? I can see it consuming the ink but nothing is printing at all. Very strange.
Hi, thank you so much for this video. I followed all the instructions to the tea reinstalled the PH new ink carts in but I'm still code 1403, 😢 so annoying any suggestions or things to triple check was very careful.
I appreciate your video and cleaned the print head twice on my beloved MX922 printer. Prior to cleaning, no colors were printing and I had done the heavy internal cleaning several times. I only managed to get the large black print block to come back. My apartment is small and can only be arranged in a certain way so I have-to-have a front loading printer and the MX922 really fit the bill and did a wonderful job for me for years with documents and photos. Before giving it a proper burial, I was wondering if you have any other tips that might help or is there a print head worth ordering to fix it? I was looking and the cost is almost as much as I paid for the printer originally. I'm on a fixed income and can't spend frivolously. Thanks.
Hi. Thank you very much for your feedback. Usually if you tried cleaning printhead manually and absolutely no color is coming through on any other colors nozzles, the problem is most likely with ink cartridges. Is there a chance your cartridges are dry at ink port?
@@303electronics I didn't have a syringe on my first 2 attempts at cleaning so I managed to find one and do another cleaning. Even though my printer cartridges had been printing, I decided to try a new set. With the syringe and new cartridges, my wonderful MX922 is now back to printing. I am very happy about that and thank you very very much!
Do you have any advice on what to do with a MX922 That wont turn on. One minute mines was working fine, then the next day it kept shutting off quickly. I thought it was a print head issue, so I took the print head out, cleaned it and it still didnt work. Then I bought a new head to replace it but now my printer wont turn on at all so I can't even use the replacement. I switched outlets too. But it still won't even turn it on 😢
Saw one of your videos before regaring epson printer not feeding paper. I tried your tip and it worked! Very helpful! I am using Epson L805 but now I am encounterning another problem. My prints are quite faded on a matte photopaper eventhough my setting is high quality print. I also tried nozzle clean already and it didn't work. Huhu was wondering what tip you could give. Thank you so much in advance!
You may need to check your cartridge. Sometimes it may seem like plenty ink is there but the port where ink comes out may be dry. You may also try flipping the ink cartridge over and dropping a few warm water drops on the port. That may dissolve some ink. If you see better results, you will know that the problem is the cartridge, not the printhead. If you have good cartridges, then try soaking the bottom of printhead in solution for a little bit longer.
merhaba lütfen bana buruna yardım bekliyorum ve ben şöyle anlatım ben canon mg6450 cihaz aldım ikinci el olarak aldım üzerindeki sağlam gibidi az hafif cizgili yazıyordu bende hafif ılık su ile temizledim ve sonuç yazmadı ve yazıyor gibi yazıyor boş kağıt çıkarıyor ben nerede hata yaptım bende onu çözemedim şimdilik yazmıyor boş çıkarıyor yaani bu soruna yardım edecek kişileri bekliyorum...
Hi. You may need to check the ink cartridges and clean the printhead. That shoud take care of the problem. If you got it secondhand, it is most likely that ink is dry in the cartridges. You can get a set for a low price on ebay, amazon, or aliexpress. Good luck!
Hands down one of the best if not the best tutorial I have ever seen on matters such as this! Comprehensive, thorough, patiently explained, and a smashing success! Smashing is the key word as it kept me from smashing my printer with a sledge hammer when all else failed! Just kidding...lol! Totally Awesome Video, and stars across the board!
After wasting a ton of ink cleaning as suggested by canon and reading so many people not finding a fix I was thrilled that this worked. I’m happy my machine won’t be going to the landfill and I found this video.
Great to hear that you didn't give up on your printer. Good work! Thank you for sharing your experience.
Absolutely spot on. Fixed my years old MX922 printhead problems. Prints just like it was new. Follow the instructions completely. Especially hooking a syringe and tubing to the printhead to flush out the old dried ink - Pure Genius!! I got a kids/baby oral syringe (10ml) off amazon for a few bucks and hooked up some old tubing I had around the house. Just a fantastic tutorial - 27 stars!!!
I really appreciate your feedback! Very happy you got the printer fixed! Have a great holiday!
Thank you so much! I dug my printer out of storage after a few years to find it wasn't printing any black, but was able to resurrect it. I had no confidence this would work and probably woudn't have even tried it if it weren't for this nice, encouraging video. Cheers
This tutorial is impressive to say the least, better than 90% of the other guides around! Thank you!
THANK YOU! This worked great! TONS of dried ink in the head. I was skeptical, but it brought my printer back to life!
That's awesome! Thank you for sharing. Have a great day!
I was a little skeptical, that this was going to save my little terrific printer. However, I followed the directions exactly, got out the little paintbrush, got out a syringe that actually fit and lo and behold, my great six year old printer is now completely functional once again. The directions are actually very simple, and I followed them exactly. There was nothing I had to buy or obtain in anyway to solve this problem and my little canon MX 920 is fully functional once again.
Thank you so much to the person who put this video together, it saved me from tossing out a perfectly good printer and spending a ton of money and something that probably would not be any better!
Ginny Keller
You're welcome! I appreciate you sharing your experience. Have a great 2024!
WORKS LIKE A CHARM!! Warm water works well also! I use my Canon to make edible images for my cakes. Thanks so so much for posting this!
Worked like a charm. Thanks. Just a point of reference for anyone following along, make sure to pull the bottom of the print head carriage out when trying to put the print head back in. I made the mistake of not pulling it out for 10 very frustrating minutes.
Thank you for pointing that out. I appreciate your feedback. Have a great day!
Dude.... you're a flippin lifesaver. I followed your instructions to the T, and everything I'd back working. Thank you!
Ps.... a bit of positive feedback; I clicked on your video precisely because of your thumbnail with the "from this, to this" images. Good work.
So glad to find this helpful video! Thanks for the easy-to-follow and clear instructions! I had to print the pattern a couple of times and then run the "clean clogged nozzle" function again, but now it is working beautifully!
I'm glad it worked, and thank you very much for your feedback. Have a great day!
Exceptional instructions. Worked like a charm. After 2 years of distorted photos, I’m finally at peace. Thank you, thank you!!!
🤯🎉Dude! I really thought I was going to have to buy a whole new printer, but another one of your videos brought me here - I have a G7020, but just a few minutes in a solution with warm water & alcohol (had no windex) and I’ve already seen MASSIVE improvement, the nozzle check prior (even with deep cleanings) barely printed anything beyond a third of cyan and strip of yellow ONLY - now I have damn near a full nozzle check test printed!
I’m going to do another machine deep clean or leave it in the solution longer, but you really saved me $300. THANK YOU!
You're welcome! Thank you for sharing. I'm glad it worked. Have a great weekend!
This WORKS. My MX920 just stopped printing black and I washed the head. Fixed. THANK YOU.
Thank you SO MUCH. This is the most helpful printhead cleaning video I have ever seen by far.
One of the clearest instruction videos on RUclips. Worked perfectly to clean up the print heads. Thank you!!!
Glad it helped! I appreciate your feedback very much. Have a great day!
Thankyou! You’re a legend this worked for me. Hadn’t used my printer in over a year and the red / magenta wasn’t printing
I appreciate your kindness. I'm glad you got the printer going! Thanks for sharing.
Excellent video! Great directions, instructions and very easy to follow. Nice voice.
I really appreciate your kindness! I'm glad you found the video helpful. Have a great weekend!🙂
Superb video! Washing the print head solved my problem of not printing any black. Didn't even know this was a thing to do until I watched your video.
Thanks for the feedback. I'm glad you got it fixed. Happy new year!
wow. really fantastic! I am not a techy person but your tutorial brought my printer back to life. thank you so much!
Great to hear! Thank you for the feedback! Have a great weekend!
thank you! it worked perfectly. i must say that the syringe made all the difference and should always be used. thanks again.
Thank you very much for sharing your advice. I'm glad you got the printer fixed. Have a great day!
Was about to pull the trigger on a new printer but thought I'd give this a shot on a different canon printer. The syringe element seemed to make the difference, works like new now, thank you!
Thank you!! Great tutorial, easy to understand and follow and best of all it worked! Appreciate the help!
On my Canon MX922 the text prints blurry and is really hard to read. Would this be because I need to clean the print heads? I tried the regular cleaning process from the menu display, but it didn’t help.Thank you. Your videos are great!
I also have a blurry print problem, cleaned heads twice, no effect. What is the cause please. tpowers917
Any thoughts about using isopropyl alcohol instead of the winded solution to clean the print head?
This person used it and said it was fine
ruclips.net/video/C5eQZmzZMqo/видео.html
Thankyou so much, your video solved my printer problem 😊 soaking it in a glass cleaner and bit of ammonia plus the syringe thing was a helpful trick for me.
That's great! Thanks for sharing.
Thanks for this useful video! In my case I was getting no cyan color at all, and removing and cleaning the print head would not fix the problem. What fixed the issue was the syringe trick shown in your video! Clever idea!
Thank U ! Going to try this and could you please tell me what the cleaning solution is that you used ?
worked like a charm....thank you for your expertise!
I appreciate your feedback! Have a great weekend!
Thank u . I do the same . But one of the color when i bush the water it so hard like its closed .. is ther any solutions for that pls !
Hi. I'm sorry you are having trouble with your printer. Try soaking the bottom of the printhead in about 1/8th of an inch in windex for a few hours or overnight.
@@303electronics thx bro I'll try that
I just got a support code B200 on Canon PIXMA MX922 Printer. I found several videos that explained the same thing. As you are doing to your printer, have you had this occurred again to your printer? Since you put this video out a year ago. How often have you done this since then? Your information would be greatly appreciated.
It was printing a million fine lines. Fixed problem. Worked perfectly. Pay close attention to putting print head back in. You’ll thank me. 😊 Cleaning encoder not needed.
I did just what you said and thank you so much, my 10 year old printer is now putting out prints like it did when it was new.
I just went through the whole tutorial (great tutorial) but I'm still having issues with the regular black (not PGBK) print head. I can visually see the dried ink clogging the nozzle but it just won't come out. Are there any other things I could try for extremely stubborn ink? I got the while printer at a thrift store for like $10 so if I need to buy a new print head it's whatever.
If my printer is still shooting out blank pages after doing this, and getting it so clean the water is clear, do you have a video on what to do for that situation? (put new ink in low cartridges - still nothing)
Thank you very much for this video.
Awesome. It worked and I have a brand new printer. Thanks.
i get no printing at all, do you think they dried out at the head?
Do you have any advice on how to clean the printheads for the G3410 series?
Hi, yes, I apologize for a late reply, but I posted a video yesterday and the first part of the video, first 6 minutes approximately, the technique is what you can use for an EcoTank printer like g3410.
ruclips.net/video/vNHOaATPloU/видео.htmlsi=jZWQufJ-_Wj-Z6fo
@@303electronics Thank you very much!
THIS was just what I needed! THANK YOU! THANK YOU! THANK YOU!
You're welcome! I'm glad it was helpful. Have a great day!
Will this work for blurred text? I’m going to try cleaning the head as suggested but my text is coming out blurry on some lines and clear on others. So frustrating.
This fixed my problem immediately. Thank you!
Glad it helped! Have a great day!
Hello 303electronics,
I followed all your cleaning steps to remove B200 error from other video but I got a problem that all cartridge lamps are not lit anymore and I got error 1405 and then 1660. I then checked the cartridge pin contact after cleaning the print head but I got no voltage anymore. I did measure the pin contact before the cleaning, if I remember correctly, the voltage on the left pin 1-2 is around 2.76v and the right pin 3-5 is around
Hi. More like a printhead problem. Seems like your printhead died, not the printer.
Great guide. Was able to clean my print head completely but still having an issue. You have any idea why print head would draw in the ink but then print absolutely nothing on the paper from either paper tray? I can see it consuming the ink but nothing is printing at all. Very strange.
I had the same issue. Changed setting from print in black only to print in color. Fixed! No idea why!
Can you use acetone instead of a window cleaner?
This worked once for me before, but 2nd time around it’s not working anymore. So what does that mean?
Hi, thank you so much for this video. I followed all the instructions to the tea reinstalled the PH new ink carts in but I'm still code 1403, 😢 so annoying any suggestions or things to triple check was very careful.
I appreciate your video and cleaned the print head twice on my beloved MX922 printer. Prior to cleaning, no colors were printing and I had done the heavy internal cleaning several times. I only managed to get the large black print block to come back. My apartment is small and can only be arranged in a certain way so I have-to-have a front loading printer and the MX922 really fit the bill and did a wonderful job for me for years with documents and photos. Before giving it a proper burial, I was wondering if you have any other tips that might help or is there a print head worth ordering to fix it? I was looking and the cost is almost as much as I paid for the printer originally. I'm on a fixed income and can't spend frivolously. Thanks.
Hi. Thank you very much for your feedback. Usually if you tried cleaning printhead manually and absolutely no color is coming through on any other colors nozzles, the problem is most likely with ink cartridges. Is there a chance your cartridges are dry at ink port?
@@303electronics I didn't have a syringe on my first 2 attempts at cleaning so I managed to find one and do another cleaning. Even though my printer cartridges had been printing, I decided to try a new set. With the syringe and new cartridges, my wonderful MX922 is now back to printing. I am very happy about that and thank you very very much!
Excellent video!
Thank you! Have a great weekend!
any concerns if the rollers in the back are getting dirty?
Do you have any advice on what to do with a MX922 That wont turn on. One minute mines was working fine, then the next day it kept shutting off quickly. I thought it was a print head issue, so I took the print head out, cleaned it and it still didnt work. Then I bought a new head to replace it but now my printer wont turn on at all so I can't even use the replacement. I switched outlets too. But it still won't even turn it on 😢
I have Canon MAXIFY MB5150 how to do it here?
Saw one of your videos before regaring epson printer not feeding paper. I tried your tip and it worked! Very helpful!
I am using Epson L805 but now I am encounterning another problem. My prints are quite faded on a matte photopaper eventhough my setting is high quality print. I also tried nozzle clean already and it didn't work. Huhu was wondering what tip you could give.
Thank you so much in advance!
Hi I do all the steps but still have problems with the color pattern. The PGBK lines print incorrect how can I fix the problem?
You may need to check your cartridge. Sometimes it may seem like plenty ink is there but the port where ink comes out may be dry. You may also try flipping the ink cartridge over and dropping a few warm water drops on the port. That may dissolve some ink. If you see better results, you will know that the problem is the cartridge, not the printhead. If you have good cartridges, then try soaking the bottom of printhead in solution for a little bit longer.
Whats the cleaning solution
It worked for me, thanks for the instruction.
You're welcome! Have a great holiday!
Good job. Thank you.
Which solution do you use to clean this head
Now th eprintter is giving me this message "some inks tanks are not installed"....help please
this did not work for me nothing is coming out for my PGBK what do I do now ?
Do you have another ink cartridge?
@@303electronics yeah it weird my ink showed it was full but i switched it and now its working just sucks I wasted so much ink on the other ones
thank you. it worked for me.
Awesome! Thanks man
Glad to help! Have a great weekend!
Great!!!
Thank you so much!!!
You're welcome! Have a great day!
I followed step by step meticulously and now it prints worse. I don't have any black at all, and the top grid part is now wavy.
I think at this point you should buy a new print head
Mine looks the whole picrure kinda green im gonna try to see if it works but i thinks i just damage it ugh 🙄😥
Thank you so much this worked for and saved me $$$$
I keep getting a Support Code message on the printer screen that doesn't let me access the menu. How do I bypass this?
maybe try the stop/red button?
good
I got 3 MX922's because it was 20 to 30 bucks cheaper than buying just the ink. It's also a testament replacement cartridges are a ripoff.
God bless you
😊Thank you so much! Have a great day!
merhaba lütfen bana buruna yardım bekliyorum ve
ben şöyle anlatım ben canon mg6450 cihaz aldım ikinci el olarak aldım üzerindeki sağlam gibidi az hafif cizgili yazıyordu bende hafif ılık su ile temizledim ve sonuç yazmadı ve yazıyor gibi yazıyor boş kağıt çıkarıyor
ben nerede hata yaptım bende onu çözemedim şimdilik yazmıyor
boş çıkarıyor yaani bu soruna yardım edecek kişileri bekliyorum...
Hi. You may need to check the ink cartridges and clean the printhead. That shoud take care of the problem. If you got it secondhand, it is most likely that ink is dry in the cartridges. You can get a set for a low price on ebay, amazon, or aliexpress. Good luck!
mx 350 canan here
*PromoSM*
Have a great day!
my PGBK isn't showing up AT ALL. ideas? mx922 and it's full.
Seems it's clogged. Have you tried cleaning printhead manually?