Losi Promoto MX Slipper Adjustment & Bike reaction!
HTML-код
- Опубликовано: 9 июл 2023
- Adjusting the slipper clutch on the Losi Promoto and checking out how it changes the bikes handling.
Losi Promoto available here (amainhobbies)
bit.ly/3NLfA0y
Losi Promoto available here (horizon)
bit.ly/3JG2sZa
Wheel nut tool I’m using available here
bit.ly/43iYjRZ
Cheaper wheel nut tool available here
bit.ly/3JPhrQF
Zeee 2s shorty Lipo I’m running (will have to make your own lead with low profile bullets & ec5)
amzn.to/46GFBXa
Zeee 2s Shorty lipo (cheaper option,will have to make your own lead with low profile bullets & ec5)
www.amazon.com/dp/B07XP3QM51/...
Losi Promoto Stock Wheels & Tires available here
bit.ly/3JS41Dp
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ Развлечения
Thanks for doing that adjustment on clutch. Your right nobody ever messed with adjusting. That's what I was hoping would happen. So we have a positive their.
Now to see it in a race to see the limit you can go without losing ground or race because of it slipping. Good video
Yeah I tightened it slightly after this and it has a pretty good sweet spot but it was on the concrete so it’ll be totally different on dirt. I wish I had a good track around!
Yeah they sure look awesome, Yep we’re here watching Matt
When you first got it you said you don't think it would be something you would play with much and I figured that would change cause it's the most fun I have had with an RC since the first XMAXX came out. It's insanely fun and your always learning something new with it. lol
Yeah I kinda figured the new would wear off and it would sit but it runs much better In basically every terrain that I expected. I didn’t think it would be all that much fun around the house but it’s been a blast! I’m actually thinking about building a small track for it out back now 😆
@@2fmrc Sorry for the late reply. You should build a track! That would get so many views! I have been jumping mine onto my barn roof and back down to a landing ramp. You can buy mini BMX inflatable landing ramps for kids. It's perfect for landing the Promoto MX off of huge jumps. I paid 120 for my inflatable landing ramp at the BMX shop. It is worth every penny jumping off of the barn roof.
You're watching this what does it hurt you to give this dude a thumbs up and push him into the algorithm to Thousand Years in 8 hours is amazing right for us that do RUclips or they have done RUclips that's amazing it really builds up your faith in your hope in what you're doing so why not go ahead and smash that thumbs-up and why not go ahead and subscribe it does not cost you anything
I'm stoked you got 1 Still waiting on the kawi. After a long hiatus from RC YOU'VE HELPED IMMENSELY !!! Thank You...
Awesome! So glad to hear it. Hopefully those green machines ship soon!
Awesome adjustment tutorial. I have a few RC bikes (Especially love my 1/4 scale dirt bike from Himoto) and absolutely love them. Can't wait for this to be released next month in Aus... Have one on preorder already. Think what Losi have done, especially with the gyro where it is, has helped the wacky handling that bikes with the rear wheel gyro have. I'll buy the supermoto wheels and tyres too. Cannot wait. These things are epic!
Cheers for the vid!!
Thank You for this Video! I'm waiting on my Moto and appreciate your input and tips. I've been checking out all the videos on this awesome new Losi Motorcycle!
😎👍🏻
Thanks for checking out the vid! I’m hoping to have a lot more on it soon. Lots of other projects atm but really enjoying these bikes!
That bike looks to be absolutely ama-za-zing!!
They definitely are!!
Got that 69th like, like old times. Cool bike. Great job on the video, very professional with you in front on the camera.🤝👍
Haha! Love it! Thank you 🙏
That's what I'm talkin about
Leaving a comment for the algorithm, great info.
So proud of you bro 2000 views in 8 hours talks about praise God bless this man you know his heart God you said father that it is not what we put in but what comes out
awsome viddddd, luv this
Always great content!! 💯
Thank you so much!
Just got my blue pro-mx. yeah the gyro is the most important and the clutch may take 1st place in the critical class
On dirt 12:00 is about best on the gyro and I'm going to do clutch trim tomorrow. Maybe 1.5 out?.. we'll see.
Losi put out videos on how to fix just about everything on this its actually really good info
Yeah I seen most of those. Haven’t seen anything on the slipper or calibrating the esc for more brake. Working on that one now 🤘
@2fmrc its buried in the 50 minute video getting to know the promoto definitely more handy if you make a shorter video on it its a cool video because the engineer on the team is the one discussing how to do it
I’m not sure why the hell im still waiting for mine 🤷🏻♂️ I’ve been to busy to make it to LHS. But I will be going tomorrow to see if and what they have got in stock.
I made substantial adjustment counterclockwise to loosen up the slipper clutch but I don't see any significant changes during road mode. How do I find out if the slipper clutch became too loose?
So what setting did you end up using on concrete? Did you back it out all the way and do a quarter turn in or how much did you come back in from all the way out on the slipper?
Just watch your clutch video, again ! I do appreciate your vids. I to have a blue mx, and I'm waiting on the supermotos. Will you have a video on the supermotos ? I hope !
Really appreciate that! I definitely will if I ever get them lol
@2fmrc cool ! I removed the cooling vent covers... I dont have a heat issue, but mine doesn't see dirt or grass, just a clean open pavement lot. I also took some vinyl screen, painted two pieces "red" and put a peice in side the vents, to keep debri out.
I was really thinking I would wait until the second batch came out before I pulled the trigger and bought one. After watching many reviews, I'm getting one Friday. These are just too cool of an RC not to have one. 900$ with tax in here in Canada. Extra batteries are 100$
I watched a review of a guy who printed a smaller sprocket for the rear wheel to increase top speed. Got it to 54 MPH, so extra 12 MPH. Really noticed it on the low end torque , though. He also found out that chain is actually a standard size. The one on the bike does not have a master link, BTW.
I didn't know the slipper clutch was adjustable. I wouldn't want to go too loose, may burn it up, with no replacements available.
One last note, if you don't call that jump you did full send, I don't know. You've already done some pretty hard stuff, and it's still holding up. It must be pretty good, and this is a product you recommend, so I'm going for it !!
Yeah so far mine has held up really well! I ordered several different pinions to play with on mine because there’s no way a printed part would hold on mine. It would be broke in seconds 😆. I do think this runs the same slipper as their 22 buggy lineup so that may be the one part we CAN get lol. I didn’t see a master in the chain so figured it would have to be broke. Wonder if I still have my old chain breaker tool from the bmx days?!!! Hmmm I may have to look around lol. Appreciate the comment and hope you love it as much as I do if you go for it!
deff getting 1
Looks like a steering damper would be useful
Hey Matt, could you tell me how many threads are showing passed the end of the nut . I putt the carbon fiber frame plates on ... and I didn't think about counting the threads or taking a picture of it when I took it apart. But I just noticed I should have . So if you have a good idea where it was stock, that would be great. Thank you .
I’ll definitely take a look at my stock (untouched) bike tomorrow and let ya know!
@2fmrc thank you 😊. I found a picture of a new one for sale . And it looked like 3 treads were showing . But if you wouldn't mind . That would be great 👍. Stay cool . 😎
Hello Matt; I was just wondering, did you know that bike has different riding modes, Wheelie mode!...etc?.
Thanks for the awesome videos.
Yeah I leave mine in wheelie mode most of the time lol. But even in the on road mode it still lifts the front end a lot so I wanted to play around with the slipper to dial it down some. Gonna play with pinions next.
So i wonder if putting a lower KV 2 in 1 motor (hobbywing do a 1400kv i think) would allow you to run 3S without overspeeding the flywheel
You can run a voltage step down for the flywheel esc to run it on 2s and run the main motor on 3s. The problem is the Flywheel has a governor on the controller to keep a constant speed from the inertia put on it.
@@FarmerFpv Yes i think all of the 2 in 1 motors (which are basically crawler motors) effectively have governors on them. Hobbywing and spektrum both call it FOC (where torque is adjusted to maintain a given speed regardless of the terrain). Depending on how much current the flywheel needs (maybe a bit at startup?) it might need to be quite a large regulator to step down 11v to 8v.
What chassis have you got for the Lancia on the right? Looks the absolute business!
Hey sorry I just seen this. That’s an rtr from Hosim! Really sweet!
amzn.to/43pKYqZ
I have seen the bike in person and even driven it. awesome stuff. I see a big fail in the long-term sadly. don't see racing well together. Corner Marshall's will be everywhere. hahaha
Yeah you would definitely have to have a bunch of guys who can really drive to have some good racing. I’ve seen a few vids of them on the track and I’m thinking…. Man I wouldn’t wanna be racing next to those guys 😆
How's wheelie mode with slipper loosened up?
Depends how much you loosen it really. If it’s too loose it won’t wheelie at all.
Invest on a Solo Shot 3 or Pixem 2 camera tracker so you can concentrate on driving.
Will they keep up with the faster RCs? I’ve never owned anything with tracking that could keep up most of the time lol
😍🔥🔥🔥👍
Mat, I like your channel a lot, really great content. BUT I guess I have lied to my wife because of you. I told her not buying this bike but after seeing so much cool content from you, using this bike, I guess I have to…. 🤪
Ooops! Haha! Just go ahead and apologize to her for me 😆
Not sure about full throttle no wheellie because if it doesnt even attempt to lift the front that clutch is slipping a little too much.
Also this is probably awesome setting for children
Any idea if it's water proof ?
They say it’s like “water resistant” it wouldn’t bother me a bit to run mine in the rain or through puddles etc but I definitely wouldn’t submerge it at all.
I love my Losi LMT Gravedigger
Yes! We love ours! They haven’t been near as tough as this thing so far but still a blast lol
Be cool to have a sound kit.
No kidding !! I have one in my 1/10th scale crawler, and it really adds to the realism .Would have to be pretty small.
They say that the gyro won't handle 3S
Yeah I don’t really trust “they” 😆
I ordered a spare gyro so once it arrives maybe I’ll test it out lol. That or I’ll seperate the power to the gyro from the esc/motor. If I can find enough room to stuff another battery pack in it!
@@2fmrc Maybe the 2nd battery fits in the driver?
do ya even have one yet??
You can see all tracks left on your concrete. You have been driving the crap out of it
I wish I could find tall sizes on your merch. Nobody wants to see the belly hanging out when the arms go up
Yeah man I’m sorry. I wish they’d offer more sizes also
more power or more speed will Destroye the model ... useless . a good mode could be a servo to to straighten the bike !
rc of the year
No doubt!!! Probably my favorite in a decade!
i had a rc dirt bike years ago, it was uncontrollable as it didn't have a linear throttle response you touched the throttle and it just flipped over backwards. I discovered you could adjust the clutch, same thing as this clutch, loosened it off and it was more drivable but the clutch slipped so much it melted the clutch plate onto the gear drive, was a waste of time and money. It looks like this model will fail the same way, your clutch adjustment has put me off buying one......im sure the clutch will fry itself
Well I mean the clutch adjustment really isn’t needed on this one because the thing almost drives itself if you have any idea how to control the throttle. I just wanted to see how it affected the bike mostly. I run mine tight most of the time so it will wheelie easier since in wheelie mode it holds itself anyway lol
dude don't step out the front door you might role your ankle, just stay home.