Converting My Saab to LED's?!
HTML-код
- Опубликовано: 10 сен 2024
- In this vid I attempt to swap my fog lights to LED's. If you like the video and would like to see more Saab stuff and how-to's be sure to like/subscribe/and keep being awesome!
Contact: WeakestOfWeeks@gmail.com
Good video. The only thing you were missing is a LED Light Load Resistor Kit. Older electrical Systems in cars not built for CAN technology simply need to have electrical resistance dampened. This is when the load of current can essentially tell/trick the older car computer into thinking it has a regular bulb in the socket. When too much load is in the circuit without a resistor then you get hyper flashing lights. Many places sell the kits. Easy to install also. Hope that helps! 😊
This is the same thing with home X-10 modules when used with modern, low-current LED lightning. They do this same kind of pulsing for current sensing determine if the person switched on a lamp, to automatically turn it on. The standard fix for those is to plug in an incandescent night-light along with the LED fixture. In this case, it's pulsing a little current to make sure that the lamp is still functional. :D
Bruh what kind of resistor. People always say to get a resistor kit but how do you get the resistance you're looking for???
I know this video is more than 3 years old but I wanted to add some info here. Recently I flashed my 2011 Saab 9-3 with Maptun's LED enabler, which enables almost all external lights for LED. Except for brake/tail lights and turn signal lights all the other can be replaced with LEDs after flashing the BCM with Maptun's software. Although a bit pricey, I think it is worth it as there is no need for load resistors.
I have the same red saab since 2014 your videos have been very helpful, the only problem with the car is the shocks and door handles. I keep having women leave there husband's cars and fill mine up. I appreciate all the knowledge
😆
Hey, bud. Don’t consider this a bust. We learn through failure and are fortunate to share in yours without the expense and dirty hands :)
I put led lights on my 2004 rear number plate. They stroded when my car was off. When you lock the car after about 10 seconds they stop. It looks pretty cool once you've locked your car.
I don't get any warning lights on the dash either.
I did the same with my 2005 Saab 9-3 arc and they too look kinda strobe lights, after 20secs they turn off when the car is off, you just have to turn off the fog lights every time you are not driving or it will drain your battery completely, I did the tec2 were when I drive I can choose to have the headlights on or fog lights or all 3 high beam, low beam and fogs at the same time, I do like the strobe cause when I park my car and lock it it seems like an alarm so I get some complement or people ask about the strobes, I did this like 2 years ago and I have no problems at all, only 3 times that I forgot to turn off the fogs and I had to jump start the car, waithing for them to fail so I can put some green ones.
If no one has found a fix all you need is a Tech 2 for quick and ez install of LED lights.
You cannot enable LED lights via tech 2. Without physically creating a custom harness with resistors or relays, the only way to enable led's by simply programming is with Maptuns LED Enabler App
@@WeakestofWeeks i got it done with my Tech2 by Adding UEC and changing it to Xenon and not Halogen. (Headlights)
great dog seems happy
Great video, deffo a like just for the happy doggie. Love the way he brought your shoes to go work on the saab. :-)
Add the difference between resistance in new bulb minus old bull. You can buy the resister and put it in series on the bulb circuit. The resistor should be glued or onnected with screws to something metal. Make sure it's located where the heat it generates won't damage anything else.
If you add a resistor on each fog light from negative to positive the car will think they has a original load and will turn on and turn off like normal 6ohm 50w should do it
10K resistor, even had to do that with the dome light on my old Focus, stayed on (dim) when I closed the door!
Howard Messias ok so if you connect the led and you connect a bridge not serial but parallel, with a 10k resistor along the led it stops flashing? My 2007 Saab 9-3 has H7 hi beams, w5w presence, and H3 fog converted to LED. Ordering a so called “CAN bus led” does nothing except stopping the error on the dashboard (my w5w led are real CAN bus led, I get no error but they blink), it always blinks. I ordered all anti-flickers modules you can imagine from eBay to stop it but my Saab still looks like a Christmas tree until I turn on the lights. I could quit but LED lighting is so much better ! Plus I have xenons with 7000K Osrams cbb, it’s so cool, my front light are all pure white with a zest of blue. Awesome.
U have Swedish plates in the usa? 😋 greatings from Sweden 💪
The strobe effect is kinda cool, and since it uses minuscule power... go with it and just clear the error when you start the car, just a simple push of a button.
A cancellor will stop the bulb warning, but the shut down blink will always remain on led. But only for 2mins
Is this the same for taillights being LED?
I changed mine out to hid and no flashing and match 5k hid bulbs and its bright
2 years later... Have you found a good replacement? Since I'm looking to do the same on mine.
Also looooove the 9-3 sir veereerrrryyy nice (almost jealous of the color)
Thank you! I absolutely love the laser red color. As for the LEDs, yes and no. I've tried introducing a relay with a custom harness and still kicked back bulb outage errors. Since then, Maptun has developed a very promising product to enable the use of LEDs. I reached out to them a few months ago to see about dealers that offer the product in the United States but they never responded. www.maptunparts.com/maptunerx/maptunerx/294808/led-lamp-activation-app.html
I have tried LEDS in the tail lights without success. At some point the tail lights stop working
I have install led on my Saab 9-3 but it does same thing also it turn of 10 sec later
I wonder if there's something similar to Carly for BMW's for Saabs where you can code the car to skip the volt check? I did that on my BMW: ruclips.net/video/4E80Q-8kbqg/видео.html
maptun has created a program to change the lighting in the Saab to LED, I wants to use it in my T'X
I'd like to give Maptuns new LED programming a try as well but it's extremely expensive for a one time programming deal.
It will only strobe 2 mins till it sleeps
If You Don’t Have A Bosch Tech II To Clear The Code(s),Then Disconnect The Battery Cables For 5 Minutes,Then Touch The Two Cables Together Several Times Within That 5 Minutes,Then Reconnect The Cables To The Battery And That Should Clear That Code & Issue.
if the key fob is in the ism technically the car is on
How about that day time running bulb next to HID?
I'd love to convert that to led as well but unfortunately will cause bulb errors if swapped too.
Can you disable them completely with Tech 2?
Yes you can disable via tech2. I did such with my 07 but haven't done it yet on my 08's. Should be a similar process though.
I changed the headlights in my girl friends Dodge Dakota truck and all the electrical system went haywire. After 2 days the dash says "Check Gauge" and even worse and more strange and unexpected, alternator stopped charging the battery.
However, this was just my experience. Might have been coincidental
Shahab it could be because of what pFusion Technologies said in the thread earlier. You may need to put load resistors in the circuit. The LED don't take much 'load' hence the computer is unable to regulate the supply. It sounds very intuitive. Best.
add a resistor in line
Got HID low beams Saab 08 do the same when I unlock the car with the key knob , and will do it again after the car is off until it’s locked and some minutes pass by , bummer , also dashboard pop ups 🤯
Did your car originally have halogen headlight bulbs? The headlight settings for the car probably need changed to xenon via tech2 scanner.
Those cheap "No canbus error" LED lights never work! :D
Mine take h8 and it’s a 2003 but Uk car
GM style... hahaha
h3 fogs
h7
Wouldn’t waste my time Saab and gm spend millions designing the car why mess with it