Get the Garmin Force Update Now! UPDATE 5.20 is AVAILABLE!
HTML-код
- Опубликовано: 5 авг 2024
- UPDATE 5.20 IS NOW AVAILABLE!
Danny Ray is screaming to all Garmin Force owners to make sure they have their trolling motor updated to the 5.20 version. He had his trolling motor lose power at the lake. The Garmin Force trolling motor had the 4.30 version when Danny Ray purchased it. Danny Ray had no idea that his Garmin Force needed an update, especially after only having it for about a couple of months.
Before downloading the update, you have to set up a password with your Garmin Force trolling motor remote, enabling the update to transfer. Click the Garmin support link below and follow the instructions.
Support: Force Trolling Motor Software Updates
• Support: Force™ Trolli...
Danny Ray had a bad day, and it started when he broke his line reeling in a fish. His Garmin Force trolling motor stopped working soon after. Then everything started falling apart.
Danny Ray also answers a question that most people want to know about Jesus Christ. Why does Jesus Christ want to have a relationship with YOU?
Click the link below for more information about having a relationship with Jesus Christ.
forgive.me/the-hunt-is-over/?...
Lake Bistineau - Flood Stage Jig Fishing For Bass
• Lake Bistineau - Flood...
Chasing Crappie in Arkansas on Lake Erling
• Chasing Crappie in Ark...
What to do for Mother's Day
• What to do for Mother'...
#Active Captain
John 3:16
For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
Music was provided by Tunetank, and Country Story by Redlion Production. 
Спорт
Danny Ray… Thanks so much for posting this video. I was having the same problem with my Garmin Force and the 4.50 software update took care of it…Now I’m cookin with beans & grease again. 😊
Really enjoy your channel…
That's awesome dude 😎 I am glad that you are cooking with beans & grease. A friend sent me a message from a Ranger forum where a guy had the same problem. I figured it was a common problem. Well, glad it helped you. God bless!!!
Danny this is an awesome video keep up the great work
Thanks Jerry. You are right about the WORK part, because it is a lot of WORK!
I say bad luck directly associated with that LSU hat
Easy Now!
I just did my update at jack Miller. I’ve had 4 of these trolling motors and they have to hold my hand every time I update
It took at least an hour. I could not get my prop to come on. I was at 4.0 today
That dude was patient
But now my arrows are red. I don’t even know what they do
I am curious, why have you had four Garmin Force trolling motors?
The arrows are for Motor Status--non blinking red means "the motor software is starting up." Red blinking means "there is a system error." You may have to power off and power back on. After an update powering off and back on is what Garmin recommends.
Good information but I still can't log on to Activecaptin. Do you know the phone # for Garmin support?
Garmin 1 800-800-1020
Sorry for the delayed response. I have been out of town and just now saw your message.
How do you keep your trolling motor half way up like that…
It is in the design. The Garmin Force has two pistons and at the point in the middle of the deploy or stowing it one of the pistons will engage the bow mount. At this point, if you move it slowly it will come to a stop.
How did you get the trolling motor to connect to your phone to do the download
After you download the update to your phone get within three feet of your trolling motor. Then turn on your phone Wi-fi and connect to trolling motor. Next, open Active Captain and click My Marine Devices. Press the highlighted blue Connect button. Also, remember to turn on your remote control. I have an Android phone and for some reason my Wi-Fi connection kept turning off. I had to reconnect my phone to the trolling motor a few times. It took five to ten minutes to transfer the update. I even powered off the trolling motor a couple of times just to activate the search mode. It is a pain. One other note, I had to set a Wi-Fi password on my remote.
Ok thanks, I will try again
I just watched the official Garmin Force video again. If you can see it transferring on your phone wait until it finishes. You can also watch the transfer on your remote. After, power off the trolling motor and power it back on and that is when the green display lights will start flashing. Go to my playlist on my channel page and you can watch it. Hope it works out for you!
Hello my fiend , I have a problem like your too, but I can’t even update my troll motor yet, I don’t know why the speed power light not light on at all
If the power light is not on you may have lost power to the trolling motor. In the video, it shows how to check the voltage. If you have power to the trolling motor, you may want to watch this video ruclips.net/video/OweqVYKXIrE/видео.html It shows how to update the software. If that fails, I would call Garmin Support at 1-800-800-1020. I hope this helps.
@@praisingjesus113 I mean the three light on the top is working, but the speed light from 1-19 not blinking like when u update. It’s not running from bottom to the top, the light up and down speed not working
I did a few times, but my device still not updated to 4.5 yet, still 2.8 something
After I downloaded the update to my phone Active Captain app. I had the same problem when I updated to the 4.50 version. I just updated to the 5.00 version and had to make sure my phone WIFI was turned on. Then I had to select the Garmin Force for it to connect. It would not connect automatically. At this point, it still did not transfer the update. I had to power down and then power up the trolling motor. While it was in the process of powering up l quickly reconnected my phone WIFI to the Force trolling motor. That is when all the green speed lights started flashing, which started the transfer. Let me know if this helps!
None of this will work if you have not setup a WIFI password on your remote.
Where you from in Louisiana? I may need some tips. Going to buy one today
Northwest Louisiana. I would love to help get you set up.
Where are you located?
Jonesboro area. I have a whole setup I am going to install. Got the force trolling motor, echomap 93sv hd, a used black box and lvs 32. None of which are installed on my boat yet. Been collecting the parts and pieces one at a time.
I am upgrading my Livescope battery to a Dakota Lithium battery. Planning on having two Echcomaps and GLS 10 connected. Dakota Lithium Batteries are on sale. I also use a 10% discount code that I found by doing a Google search.
In case you missed it. Watch the video below so you can update your Force Trolling motor. Check the version and make sure it is the latest update.
ruclips.net/video/43e9fSs_0CA/видео.htmlsi=Sxy9ZULiEyto0eqT
There is version 5.00 now. You need another update.
Thanks for the info. Wayne you are the MAN!
Was this the day of the LSU/ole miss game ?
Lol