Stihl HT 131 Rebuild Part 2
HTML-код
- Опубликовано: 20 авг 2022
- Finishing the up the Stihl HT 131 pole saw. Cleaning, replacing bearings and reassembling the shafts. Took longer then usual but the job is done!
Please leave any comments or questions. Remember to like, subscribe and all the good stuff!
DISCLAIMER
LubeTube is only sharing tips and tricks to aid in repairs or services herein.
LubeTube and associated parties are not liable for any damages of any kind, whether that be public, private, personal, and so on, while repairs or services being carried out by said individual(s). Please accomplish all repairs and services safely at your own risk. Авто/Мото
Great 😮
When I extend my pole the chain stops turning. It's a new saw
Missing a rivet on the pole near the motor. Does it have a function 🤔
Any chance you would know what the factory carb settings are for the H L, mine is not running to well, like to know where the needles should be. Thanks
Try High 4 1/2 Low 2 1/2
I recently replaced all the bearings and springs in my 131 and when I put it all back together the cutter end sticks out about 3.5’ and will not retract any farther. Any idea what the issue is? Largest outer tube backwards?
Yes, the rivet on the outer tube is hitting the bearing and stopping it from retracting. In other words flip the outer tube (largest) end to end.
Apologies for the late replay. Hurricane Ian has made a mess.
At 27:57 what is that part called ?? Mines is broken
Coupler.