If you have 2co 2006/2007 model it's much easier. Just two 8mm bolts holding the servo, one bolt on the footrest holds the bracket which holds the cables, cut tie wrap that holds cables cos it also holds o2 sensor wire and brake light switch. Then I removed the bracket that's on the servo and taped my eliminator on to it, plugged it in and reinstalled the bracket😉
what a detailed and helpful video👍 could you tell me plz what is the disadventage for motorcycle if i disconnected only butterfly valve cables? noise, consumption??anything else?? please let me know👏
It is designed to open at high rpm for flow and close down low … probably for emissions. I would think just disconnecting it would theow a check light and probably run very bad.
Hi, I tried, but it didn't work. After doing all the steps, when I have the bypass installed the bike doesn't START and the light of the immobilizer system is flashing, when disabling the bypass the bike returns to START. My bike is a 2006 Yamaha R6! What am I doing wrong? Thanks!
Daniel Reis it may be something else. It's relatively simple and even if you did it wrong the bike should still start. I would try reversing what you did and see if it starts.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Good work guy! Error 18 and 17 go away in this mode! ✌🤗
Great video, helped me install my servo buddy on my 16 R6. Thanks
What do you mean by “removing the rear set”
If you have 2co 2006/2007 model it's much easier. Just two 8mm bolts holding the servo, one bolt on the footrest holds the bracket which holds the cables, cut tie wrap that holds cables cos it also holds o2 sensor wire and brake light switch. Then I removed the bracket that's on the servo and taped my eliminator on to it, plugged it in and reinstalled the bracket😉
Hi bro, can u explain to me, what do you got removing it ? thanks
what a detailed and helpful video👍 could you tell me plz what is the disadventage for motorcycle if i disconnected only butterfly valve cables?
noise, consumption??anything else??
please let me know👏
It is designed to open at high rpm for flow and close down low … probably for emissions. I would think just disconnecting it would theow a check light and probably run very bad.
how do u do it with other bikes?
I ran it up under the seat so water doesn’t get in it
Thanks for the informative video brother!
Ma se non metto questo connettore cosa succede ? Potrebbe accendersi la spia motore?
Most likely.
Mi spieghi la differenza tra gli spinotti come questo è quello che hanno una centralina attaccata?
@@luigimariani3590 The plug fools the computer into thinking its still there. Other than that i dont think it matters much
where did you buy the eliminator?
Daniel Kane Amazon. pretty easy to find
Dego Motovlogs this will get rid of my code 18 check engine light of right ?
Chris Rodriguez yes it will
Thank you for the helpful video bro
Hi,
I tried, but it didn't work.
After doing all the steps, when I have the bypass installed the bike doesn't START and the light of the immobilizer system is flashing, when disabling the bypass the bike returns to START.
My bike is a 2006 Yamaha R6!
What am I doing wrong?
Thanks!
Daniel Reis it may be something else. It's relatively simple and even if you did it wrong the bike should still start. I would try reversing what you did and see if it starts.
Daniel Reis might also be a faulty part. Maybe a return is in order.
When I disconnect the bypass plug, the bike will turn on. Can the problem be in the bypass?
Thank you!
Daniel Reis it could be a broken exup plug I suppose.
much thanks for info,it helpt!:)
thanks for the info dude
Onde consigo comprar este exup emulador? Sou do Brasil 🇧🇷
pode comprar no www.revzilla.com/motorcycle/servo-buddy-yamaha
really it just unplugged and then you have to remove the wires from the exhaust valve very simple
Dego Motovlogs if i just unplugg will the check engine light go off?
Chris Rodriguez if you just unplug the servo and don't use exup eliminator your check engine light WILL be on.
Dego Motovlogs thanks for the info dude
Dego Motovlogs how bout if u buy a used servo the same year and everything but used will that take off my check engine light off
bro can you please repost this com and give link where u bought that chip for exup
Dove posso acquistare questo connettore vengo dall'Italia 🇮🇹
Graves Yamaha Exup Eliminator for 06-16 Yamaha YZF-R6 www.amazon.com/dp/B007D62G74/ref=cm_sw_r_cp_api_glt_i_GEMMRE4NGE596R078ADJ
Or just flash your ECU to get more horsepower, no factory restrictions, unlocked top speed, while disabling your servo and AIS system.
Time for you to flush that brake fluid sir, just a bit on the dark side.
‘Cause I pooped in it.