Hey thanks for pinning and welding my comp for my aem5. You guys did great work and we're pretty timely on it. Just waiting on mine aem5 to get out of jail
Great tech thanks, and thanks for the P/W , gas block pin, I get a lot of compliments on the P/W especially after seeing what others pass off as P/W. And of course the fast turn around time.
I ordered my AEM5 though Ron Allen in January 2021. I was put on a waiting list and my name didn't comeback up till about March of 2022. So the backlog is no joke...My payment and FFL was a little bit delayed because I was travelling around that time...so after payment, FFL and ATF form it was about 2 years when all is said and done....but it was worth the wait.
good video, right there. i have a question for you tho... looking to install an Ops Inc 12 on a factory Colt M4A1 Socom barrel but using an M4 collar purchased from Charlies Custom. currently the collar will slide back almost the the 203 cut before it stops. do i need another, tighter, collar or will moving it up and locking it down to get the 7-10 turns lock be sufficient safety wise? i have found plenty of videos on testing and comparisons but not a single one on proper installation. thanks in advance!
Same setup colt 14.5 socom with collar tightens down good with set screw at edge of front step of 203 cut. I get 8 turns. Otter creek has a one piece mount that will work if your worried about the 203cut and set screw location.
Clipping typically yields much better sound performance. The JRM cups come pre-clipped. A survey of all the commercial cans in the shop show virtually all of them are clipped by the OEM.
Purchased a ocm5, cant wait to play with it! In 6-9 months thanks ATF
Did you get it? How has it been?
You’re an artist dude, huge fan of your work keep it up!
Hey thanks for pinning and welding my comp for my aem5. You guys did great work and we're pretty timely on it. Just waiting on mine aem5 to get out of jail
Great tech thanks, and thanks for the P/W , gas block pin, I get a lot of compliments on the P/W especially after seeing what others pass off as P/W. And of course the fast turn around time.
Another terrific vid from Mr Wilson. Thank you sir! 👏
Thank you for you investment , Then also sharing them with us in comparison!
I ordered my AEM5 though Ron Allen in January 2021. I was put on a waiting list and my name didn't comeback up till about March of 2022. So the backlog is no joke...My payment and FFL was a little bit delayed because I was travelling around that time...so after payment, FFL and ATF form it was about 2 years when all is said and done....but it was worth the wait.
Does anyone know the baffle geometry that Andrew used on the OCM5? Is it a pretty direct copy of the AEM5 or is it more like the Polonium baffles?
This is a great tool for choosing a mk12 can
good video, right there. i have a question for you tho... looking to install an Ops Inc 12 on a factory Colt M4A1 Socom barrel but using an M4 collar purchased from Charlies Custom. currently the collar will slide back almost the the 203 cut before it stops. do i need another, tighter, collar or will moving it up and locking it down to get the 7-10 turns lock be sufficient safety wise?
i have found plenty of videos on testing and comparisons but not a single one on proper installation.
thanks in advance!
Same setup colt 14.5 socom with collar tightens down good with set screw at edge of front step of 203 cut. I get 8 turns. Otter creek has a one piece mount that will work if your worried about the 203cut and set screw location.
Been waiting for this for a while!
Hi Dave, do you by chance have any 3 piece collar in stock on your website? Thank you and keep the videos coming!!!!!!
Does the JR Machine have anything except the but those 6 baffles? Springs? etc. I am having a hard time find the exact internal layout.
Thank you.
How did you keep your baffle clips aligned on the JR machine form 1 can?
We didn’t. Alignment doesn’t matter.
Nicely done, Dave! Do you have specs of the "mag dump" rifle? I am wondering how the Ops Inc collar was adapted to it. Thanks
16” FN barrel chopped and contoured to 12.7” and the three piece collar fitted.
Basically a MSG Gordon clone rifle.
@@dwilsonmfg Ah, I see. Contour the M4 profile to SPR for the collar?
Excellent info. Thank you, so much.
Sort of. The three piece collar gets contoured slightly differently than an SPR collar, but generally the same concept.
@@dwilsonmfg pretty much custom fit all around.
Thank you for the intel, Dave.
Question, why clip the baffles in the solvent trap (form 1) can? Are all manufactured cans clipped?
Clipping typically yields much better sound performance. The JRM cups come pre-clipped.
A survey of all the commercial cans in the shop show virtually all of them are clipped by the OEM.
In your opinion is there any discernible difference between the JR machine and the others?
The JR Machine trap does sound a hair louder to the ear. If I’d have to rank them it would be:
1. Ops Inc 12th model
2. AEM5/ OCM5
3. JR machine trap
@@dwilsonmfg TY
Is the JR machine kit mag dump worthy or would you not recommend it?
@Bon Jovi my comment is over a year old....
@Bon Jovi you could just look at how old the comment is and make an educated guess.
Anyone use Otter Creek adapters?
You missed one. I know the Spikes Tactical LRS uses the same mounting system. Wonder how it compares to the others.
Still for sale on their website.
@@arcticwhitepaint I want a comparison between it and an AEM5-30.
Am I hearing spring twang on these shots?
Get some.
Any clue what a standard aem5 is bored out to? Since yours has a oversized bore to accommodate 6mm
Standard bore size on a current production is 0.275”
Thanks man
Interesting, but somewhat lacking in technicals. Are you a suppressor geek now?
Well you’re more then welcome to track down all the cans and make your own video.
I’ll be anxious to see what technical specs you share with folks.