How To Take Out A 370z Transmission
HTML-код
- Опубликовано: 27 апр 2017
- Follow the car’s instagram @ lilzilla370
Follow my instagram @ brockzayas
Stay for the next video I will be installing a clutch and slave cylinder in my 2010 370z.
Watch these videos to see what is on the car:
• 2010 370z aFe Takeda E...
• Nissan 370Z STILLEN Ge...
• New tires for 370z!!!
• CRAZY SOUNDING Nissan ...
This video is more detailed than any manual you can get for the transmission removal. Made my repair much much easier. Cant thank you enough for do it man 👍
much love!
I just replaced my CSC this past weekend with a Zspeed HD CSC, also put a Southbend stage 2 clutch, pressure plate and lightweight flywheel. The whole job took me only about 5 hours total. Love working on the Z, super easy to do anything on it!
How do you like the heavy duty zspeed csc? And how hard is it to replace? My csc just went out and I'm going with the z1 csc delete. I'm stil researching to see which route I go.
Thanks a lot I needed to remove the transmission for weight reduction
Hey. Very good video!! Thanks
Hi man!! Excellent job! I am about to do the same to my 370z. Subscribed and can't wait for next videos.
thanks and good luck man.
really good video man!
thank you!!!!
Great vid! Even greater that you included all the bolt sizes. Hope you make a replacement video soon
ty bro!!!
How did you get the locktight bolts off the transmission
Hey man, very informative video & it has really helped me out. I need help as i’m doing the same process on my 370z. I was wondering if you could help me out.
That damn infamous slave cylinder from Nissan that they never fixed! 🤬. Good explanation tho, thanks!
Such a good video! loved the camera angles. you made it seem like an easy process, how long did it actually take?
Ben Nguyen about 2 hours and thank you!!!
like 4h.
Brock have you removed starter motor and crankshaft position sensor before removing the transmission? It says in service manual to remove them but but I believe it's not needed. Appreciate your advice!
I removed the starter but the crankshaft position sensor should not have to be removed.
What song is that at the end?
What's the name of the song towards the end of the video????
When u dropping next video aha nice channel bro keep it up!
tomorrow, and thanks bro you to!
So.. that video.. 👀
Brock Zayas wya
that little white box ( gear selection ) at the top of the trans... you have any pics of the wire connector?
no sorry!
@@brockzayas1070 its alright, I already sorted it but thx
Hi my car is down so I figured why not replace the shift knob and boot cover and stuff like that so while I was taking out the oem shift knob it was hard to get out. I feel I have damaged my gearbox is there a way I can know for sure without the car running ?
I don't know to be honest. I don't want to give you bad advice but if you do figure it out let me know. ty for watching the video!!!!
Did you hold the shaft while you where trying to remove it?
How did you remove top two bolts, on the transmission?
Lots of extensions.
Hope you get this message scene we are having issues removing the bell housing from the engine , All the boats have been removed everything is ready to go we have split it and 8th of an inch and it appears to be stuck on something can you Please advise any ideas thank you
make sure all the bolts are out on the bottom. I didn't say it in my vid but you can take the shifter off its like 3 bolts and just pull it tell it comes out.
@@doriangibson3980 You're the dumb ass who forgot with me stupid😂
@@brockzayas1070 Thanks for getting back to me we actually finished and got everything put back in today and should start bleeding the clutch finally thank God
How did you take off the top bolts of the transmission? It’s so cramped.
DarudeOwnageZ ever get them out ? I got the top right one out with a lot of extensions but I cannot get the top left out
Legacy.mp4 used a bunch of extensions and swivel joints with a breaker bar and cheater pipe😂 beware you might end up breaking a couple of swivel joints so buy extra if you need to.
DarudeOwnageZ I have a 24 inch extension with a deep 17 mm socket. And a swivel and then another 12 inch extension, even with my breaker bar it will not budge .
Legacy.mp4 I remember using an impact tool to do it but I advice not to use it cause you risk stripping or breaking the nut.
How do you remove those zip tie clips
I'd probably use tin snips and just cut them off
The plate is a good idea until the wind blows up ya
why did you take out the transmission bro?
my slave cylinder went out. stay tuned for next video, you will see me install it!!!!
Are you putting in another OEM CSC? I know there's a few aftermarket slaves you can get which are apparently longer lasting, and Z1 motorsports actually has a CSC elimination kit which brings the slave external to the transmission to make it easier to replace.
I actually have that one right now and I don't like it because of how aggressive and hard it is to daly drive.
Brock Zayas where r you
I daily drive mine and its so easy i look forward to going anywere just cause i know its going to be an amazing drive to get there!
Ive noticed I could damn near take my entire Z apart with a 10mm 😆