Note to self for later. Jon says 1800-2200 kv, as low as 1400 kv. 2 speed can get away with 2700 kv. 3500 kv single speed. Throttle curve better on esc than tx.
I am running a 11t & lower sper gaer lowest I could go because volt up gear down & it is epic really insane low-speed control, & a great top end for trails & its a Vanquish so it handles beautiful with Holmes power.
please do more high kv set ups. I love my copperhead and 4600 for my trail truck. Due to my gear down and throttle curve she's a heck of a crawler and hillclimber. I put it in as a joke but ended up loving it.
im getting me another trx4 sport tomorrow . the overlander edition , and putting a nice sensord brushless system in it , my other trx4 sport standard is going to keep the velineon system in it
Love this motor in a Phoenix. Just gives and gives. But also that smooth crawl is amazing. But I would never trust anyone else driving that motor without the dual rate pushed down. Have it on a copper head 10 and on 4S. I think all my crawlers are now Holmes powered. Now just need to get a 380 in my mini t and see how she runs
ya brother, thats good stuff right there!! I've been running a 3500 puller in my sport for almost 3yrs now paired with a mamba X....fun indeed. Of coarse it is my "basher crawler" and mud truck but it crawls fantastic,only blew out 2 portal output gears since i've had it, and quite a few bearings cuz i never clean the damn thing but its all good;)
John what KV would you recommend for my 2 speed TRX4 blazer. Definitely want to be able to crawl in 1st but most of my running will be in open pasture land so I’m looking for plenty of speed as well. Thank you sir!
Hey there, I just found this channel and what a wealth of knowledge youve got here! Ill be binge watching for awhile. Thanks for the content! Any recomendations on motor / trans / gearing setup for a traxxas summit I can drag kids, sleds, heavy toys behind? it would be nice to be stupid fast in high gear as well. or is there a better truck to accomplish this? thanks!
i want to see some foc motors from holmes hobbies if possible. i almost exclusively run fusion se motors in my crawlers since they are so damn good. if you came out with a 3000+kv foc motor at the $150 or less price point, you wouldnt be able to keep them in stock i think.
Awesome rig m8 im waiting on my puller pro to arrive to the UK its on the way as we speak to go with a mamba x I already have after your recommendation to go in my scx10.3 keep up the good work bud 👍
My TRX4 has the 2 speed I run 9 t pinion 45 spur and Copperhead 10 crawler edition which I think is 2200 ish KV On 3s my 14lb trx4 defender does 2nd gear wheelies till you run outta rpm... from a dead stop.
That's the same rig I have and same motor but with a MambaX. Have been truly impressed! Holmes Hobbies FDW! Didn't even gear down. Didn't know the 3500 could handle 4s. How low should I gear down to be safe?
I purchased the copperhead 10 and puller pro 3500 because of this video. I've noticed the drag brake won't hold the truck 100%, it very slowly rolls down steep declines/inclines. I used a 13/45T Pinion and spur gear hoping that'd be enough to hold the truck (Near stock sport). Is it possible for this combo to 100% drag brake hold? It's an amazing combination of speed and control!
The copperhead doesn't have a hold function though. So you will always have a balance of smoother startup or stronger drag with motor design. I design mine to be smoooth
Like see the Traxxas bronco 2021 with mamba x and a smooth sensorsd holmeshobbies motor hard choice which one I would buy for my bronco 2021 Some recommends are helpfull
Mr Holmes I run your 2700kv in my TRX4 sport. It's a great mix of low and high speed. Never ran 4s, maybe one day! Keep it up sir. And may I ask, why no track setup in the back yard?? Looks like you have space for a sweet track around the rocks. We like running videos!
@@chrisparz8722 whatever the truck came with. It's been two years since I built it. It's a little slow but I thinks it's a good mix of crawling and trailing. Tekin RX4 speed controller.
I've gone 2700 kv in my trx4 builders kit running 10t with 45 spur to be about perfect have found the gear mesh is too tight on the factory ABC positions found going one up puts less strain on the motor eg 10t should be position B put in C so much better and replaced the TQI for a fly sky GT5 so I can choose which diff to lock better crawler and can be made to drift with the rear diff locked only 🤣
@@HolmesHobbies 20uS low? I tried measuring it with an arduino and wasn't sure if my program was accurate. Castle link shows the end points from calibration and I think it agreed with my arduino.
@@HolmesHobbies ok yeah I've tried all sorts of tuning options dialed everything all the way down thru ESC and thru the transmitter. I'll just get a different ESC. Thanks
Let's be frank - the Traxxas TQ & TQi radios are rubbish. Cheap feel, horrible plastics & a stiff throttle & wheel action. Far & away the worst rtr radio in the crawler market.
Iv'e bough this motor loooong time ago and it sit somewhere in my cave...
Now i really need to buy an trx4 to put this beast inside hahaha
Nice shirt!
“ It’s quite a pleasure”!
You are my hero! Great video.
Note to self for later. Jon says 1800-2200 kv, as low as 1400 kv. 2 speed can get away with 2700 kv. 3500 kv single speed. Throttle curve better on esc than tx.
I’m running a 2700 puller pro with mamba x, on 4S, in my VS4 10 pro, it’s crazy but modulates so we’ll, and crawls so nicely.
I am running a 11t & lower sper gaer lowest I could go because volt up gear down & it is epic really insane low-speed control, & a great top end for trails & its a Vanquish so it handles beautiful with Holmes power.
Lol basket in the background
Just ordered my copperhead esc combo to try after seeing yours perform.. ordered for my element knight runner
please do more high kv set ups. I love my copperhead and 4600 for my trail truck. Due to my gear down and throttle curve she's a heck of a crawler and hillclimber. I put it in as a joke but ended up loving it.
謝謝！
At 12:58 you ain't cowboy on me what's up with that haha LOL 🤣😂🤣😜🤭 lmao
very nice motor. thanks for doing this
And is there a impossibel part to crawl,jump it ha ha! Amazing momentum!
Classic MTV shirt John
And the Casio calculator watch to match ……
im getting me another trx4 sport tomorrow . the overlander edition , and putting a nice sensord brushless system in it , my other trx4 sport standard is going to keep the velineon system in it
Love this motor in a Phoenix. Just gives and gives. But also that smooth crawl is amazing. But I would never trust anyone else driving that motor without the dual rate pushed down. Have it on a copper head 10 and on 4S.
I think all my crawlers are now Holmes powered. Now just need to get a 380 in my mini t and see how she runs
This is what I’m putting in my axial wraith ordering this combo in the am
ya brother, thats good stuff right there!! I've been running a 3500 puller in my sport for almost 3yrs now paired with a mamba X....fun indeed. Of coarse it is my "basher crawler" and mud truck but it crawls fantastic,only blew out 2 portal output gears since i've had it, and quite a few bearings cuz i never clean the damn thing but its all good;)
YOU are the right amount of CRAZY and I love it!!!!! Keep it PSYCHO!! Great video as always!!!
More power! Awesome! 😁😁👍👍
Love your approach, lots of fun. One, two, three... Love to launch. Can we get launch control like our full scalers?
John what KV would you recommend for my 2 speed TRX4 blazer. Definitely want to be able to crawl in 1st but most of my running will be in open pasture land so I’m looking for plenty of speed as well.
Thank you sir!
2700 or 3500kv puller pro 540!
@@HolmesHobbies with what speed control
I needs me one them new fangled screwdrivers
Really Nice!
I got a 3300 in a 2speed bronco,I love that wheel speed, but it also does great in low gear
Hey there, I just found this channel and what a wealth of knowledge youve got here! Ill be binge watching for awhile. Thanks for the content! Any recomendations on motor / trans / gearing setup for a traxxas summit I can drag kids, sleds, heavy toys behind? it would be nice to be stupid fast in high gear as well. or is there a better truck to accomplish this? thanks!
I'm here for the nostalgic M'tv shirt....! Video killed the ________ ____!
Crawling and then wheelie out of it I love it, nice motor hopefully I be able to grab one before there out of stock 🤣
Dude love the shirt!!!!
i want to see some foc motors from holmes hobbies if possible. i almost exclusively run fusion se motors in my crawlers since they are so damn good. if you came out with a 3000+kv foc motor at the $150 or less price point, you wouldnt be able to keep them in stock i think.
Nice!!!!
Damn that's awesome
Uncle Jesse would be proud.
Cool
Awesome rig m8 im waiting on my puller pro to arrive to the UK its on the way as we speak to go with a mamba x I already have after your recommendation to go in my scx10.3 keep up the good work bud 👍
What’s your thoughts on a 2700 going into a vs4-10 Phoenix? Too much?
what would you do differantly iff that rig was going to be a mud truck?
Nothing really
I put the copperhead/2850 in my 10iii on 4s, i love the wheel speed, an swapped to a 11 tooth to help save the axle gearsets
Try 9t. Mine on 3s yanks all 14lb of defender up on the bumper!
@@taomicioli I'll see if the local shops got one an see what that does, grant you I havent shimmied the gearset either, 4s is definitely fun
I'm running a trailmaster pro 2700 with mamba x with 3C in my single speed TRX 4 with 9x45 gearing. It's slow and loud
My TRX4 has the 2 speed I run 9 t pinion 45 spur and Copperhead 10 crawler edition which I think is 2200 ish KV
On 3s my 14lb trx4 defender does 2nd gear wheelies till you run outta rpm... from a dead stop.
sweet!
When are you going to run the bronco with the 3500kv motor
Don't ruin the surprise 🙃
That's the same rig I have and same motor but with a MambaX. Have been truly impressed! Holmes Hobbies FDW! Didn't even gear down. Didn't know the 3500 could handle 4s. How low should I gear down to be safe?
Wherever you want really. But as slow as possible is always a good choice with fast motors
How's it going John
I purchased the copperhead 10 and puller pro 3500 because of this video. I've noticed the drag brake won't hold the truck 100%, it very slowly rolls down steep declines/inclines. I used a 13/45T Pinion and spur gear hoping that'd be enough to hold the truck (Near stock sport). Is it possible for this combo to 100% drag brake hold? It's an amazing combination of speed and control!
Depends on vehicle weight, traction, tire size, and gearing. Go down to a 12t and see how it does, will increase drag 8%
The copperhead doesn't have a hold function though. So you will always have a balance of smoother startup or stronger drag with motor design. I design mine to be smoooth
Did you go with A and A motor adjustment setting ?
Yep, smooth mesh
What’s the best esc you recommend for the 2700 kv puller pro besides the mamba x? Thanks!
Awesome video as always. What is your favourite rc.
Y'know theres probably a market for a RTR crawler that do a little bashing.
Yeah it’s the trx4.
Hey John, do you make a motor that you would recommend for use in a clodbuster? Just something more exiting than the stock cans
Some of our retro sport motors
@@HolmesHobbies just looked at them. Are they 0 degree timing?
Yes
What gear combo for the slowest possible speed on this motor/esc combo?
11t motor pinion and its good!
@@HolmesHobbies thank You sir
I'm running almost the exact same setup except mamba x and two speed
Like see the Traxxas bronco 2021 with mamba x and a smooth sensorsd holmeshobbies motor hard choice which one I would buy for my bronco 2021 Some recommends are helpfull
Puller pro 540 2700 is a great all around
@@HolmesHobbies the standard of the stubby pullar pro for the bronco 2021
Standard imo
Mr Holmes I run your 2700kv in my TRX4 sport. It's a great mix of low and high speed. Never ran 4s, maybe one day! Keep it up sir. And may I ask, why no track setup in the back yard?? Looks like you have space for a sweet track around the rocks. We like running videos!
I dont really drive enough fast rigs. Maybe a little course for something like this, mix of trail and rock
@@HolmesHobbies exactly. Nice little rock bouncer course around the rocks would be fun.
What gearing on the 2700 ?
@@chrisparz8722 whatever the truck came with. It's been two years since I built it. It's a little slow but I thinks it's a good mix of crawling and trailing. Tekin RX4 speed controller.
I've gone 2700 kv in my trx4 builders kit running 10t with 45 spur to be about perfect have found the gear mesh is too tight on the factory ABC positions found going one up puts less strain on the motor eg 10t should be position B put in C so much better and replaced the TQI for a fly sky GT5 so I can choose which diff to lock better crawler and can be made to drift with the rear diff locked only 🤣
on a 1850 brushless motor.....for trx4 sport stock.......how low can you go without...losing the punch to hop up stuff???
for the pinion?
is 13 tolow you think?
13 no problem
John, Castle Slate 3800kv VS Puller Pro V2 540 3500kv / 11T-45T 2 speed rig = Which is more fastest?
Under low load the 3800. Under high load (high speed) likely the 3500.
@@HolmesHobbies nice, thanks for info... your motor on my radar to pair with Mamba X 💪🏼
Spektrum neutral is 1500uS :P
In practice it's still a bit off.
@@HolmesHobbies 20uS low? I tried measuring it with an arduino and wasn't sure if my program was accurate. Castle link shows the end points from calibration and I think it agreed with my arduino.
Sounds about right. Sometimes lines up better with the channel flipped though.
Have anyone tried the sw3. Cause I have and can't get any low speed control. Do I need to upgrade
Yeah, sw3 is old hardware. Use torque control to make it better, but it won't ever match the sw4 or mamba x on startup
@@HolmesHobbies ok yeah I've tried all sorts of tuning options dialed everything all the way down thru ESC and thru the transmitter. I'll just get a different ESC. Thanks
Hello to Russia too. Our toys
😁😎
playing with toys, sorry i now i will get some hate and love jajaja
lol
Defo needs gear down, in that setup its's too fast for common user.
Hey man I can come trim your grass for you
👎🏻
Let's be frank - the Traxxas TQ & TQi radios are rubbish. Cheap feel, horrible plastics & a stiff throttle & wheel action. Far & away the worst rtr radio in the crawler market.
Cool shirt!