DIY Rustic Coffee Table (Tutorial Style Video - Free plans/instructions in video and description)

*Tools links*
K4 Kreg Jig: amzn.to/3oq5fbt
Mini pocket hole jig: amzn.to/3ptXzWT
Materials used:
Pine stud 2x6x8 (x2)
Pine stud 2x4x8 (x1)
Pine firring strip 2x2x8 (x4)
Pine firring stip 1x4x8 (x2)
2" & 2.5" construction screws
1.5" brad nails
Cut list:
***I would recommend cutting the pieces as you go, rather than cutting everything at once. This way if your measurements are off, you can correct them as you build, rather than trying to make adjustments after you've cut.
Top - cut the 2x6x8 to 40" (x4)
Legs - cut the 2x4x8 to 16.5" (x4)
Long apron - cut the 2x2x8 to 37.875" (x4)
Short apron (and inner leg support) - cut the 2x2x8 to 17" (x6)
Shelving slats - cut the 1x4x8 to 19.75" (x7)
I used Minwax Weathered Oak as the stain and Minwax Satin Polyurethane as the clear coat.
This video was filmed with a GoPro Hero 6 Black and edited in iMovie.
Thanks for watching! Check out my Instagram @MMCC_Woodshop for more of my work! Don't forget to subscribe for more upcoming videos and free plans!
*DISCLAIMER*
The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools.

[@winston_james]

Great video

[@mmcc_woodshop6288]

Thanks Winston!

[@LonghornWorkshop]

Excellent build and commentary, with some great tips to go with it

[@mmcc_woodshop6288]

Thanks buddy!

[@BuckysCustoms]

Nice piece!

[@mmcc_woodshop6288]

Thanks Dana!

[@chevive7]

Simple and awesome

[@mmcc_woodshop6288]

Thanks for the feedback!

[@jimmeeks2632]

Nice build! 2 questions, you don't use kreg screws? And no glue? Just curious

[@mmcc_woodshop6288]

Hey Jim! I usually just use regular construction screws under the assumption that they were cheaper (I've never really looked into it though), and haven't had any issues using regular screws personally.
I typically do use glue on most joints but just wanted to show a simple version of a build that could be done without using glue.