This thing is money I use it religiously and let’s say the masses of people are blown away by the versatility this tool offers. It has the ability to read measurements and display them in any measurement form you desire... the Stake feature has got to be the coolest thing I find. Check it out in a video if you get the chance. My only beef with this tool is that the batteries no matter what kind I use, even the best Duracell on the market, it always eats the batteries even kinda seems too when it’s not in use. Either way this tool is a must for professional people it cuts time of quotes and the fumbling of measuring tapes etc.
I recall needing a measurement of approximately 70' inside a building and it took me about 55 seconds to do it by myself with a tape measure. The Bosch laser got the same measurement in only 5 seconds. It's amazing!
markthomasbuilder ....ive actually been using a bosch for about 3 years. The one I just ordered is the bluetooth version. It will auto list all my measurements so that I dont have to make notes. I actually use the bosch app to make all my initial notes and pictures, then send the “form” the app creates to google drive. That lets me keep all my project notes, pictures, and measurements with me on my phone
Great video. Made comparison with GLM40 easy. Showed the benefits of less understood feature very well. e.g. use with smartphone to instantly add dimensions to an object in a picture. Thanks for sharing.
I am old school.... you never see checking the accuracy of a measuring tape with a laser measurer, but you do see checking the accuracy of a laser measurer with a measuring tape. I guess once their dialed in though, they are pretty cool, but for critical dimensions, I would always have to confirm it with a tape. Cheers.
Very clear and thorough review. Thanks! I'm sold. Not having to bring a second person, and explain WHERE you want them to hold the "dummy" end of the tape measure: priceless.
Problem I have with it is it is accurate to 1/16" but reads in 32nds. Transferring measurements I have to stop and think what equivalent 16ths it is. They should have just used 16ths. I put a piece of tape on back with different equivalents.
If the laser tool measures from its front edge…. Would you have to add the length of the tool to each measurement, for it to be accurate? Is the an option to measure front the front vs back edge of the tool?
Hi I have one and use a metal angle bracket you find for anchoring joists ,put it one the floor and the beam hits it and gives you the measurement. You get use to how to set it in relation to the corner very accrue
I bought this unit because it also includes angle measuring. It measures angles in degrees but I need percent slope (grade). I got an app for my iphone named "Handy Grade Converter" that converts angle to grade or vis versa. For checking ADA walkway grades I set this unit on a long standard level or straight board.
So how does this work with the device calculating in its own distance? Like in the example of the 70 ft why was it not 60 feet 8 inches with 4 inches being the device distance.
When you compared it to the actual tape it was off, so which one is accurate the tape or the laser?? If something is off by an 1/8 inch well that's not worth buying in my opinion.
@@irvinanguiano944 when measuring from the garage door I noticed the tape was not particularly tight and had slack bits in it - certainly enough to give an error of a fraction of an inch
Thank you for a helpful video. I am trying to figure out Bosch's MeasureOn room diagram tool and would love to see a video shpwing hw to layout a room, including doors, windows etc. Their extremely short videos leave much to be desired. Thank you.
@@MarkThomasBuilder I finally got a pragmatic customer support rep on the line and he directed me to: ruclips.net/video/OKHK5CA363Y/видео.html which is their European help site for the MeasureMaster app that is not available in the US, but is similar enough to give some pretty good guidance and, IMHO a good base for a talented RUclipsr to show us less capable folks how to make a really good layout plan. What attracted me to the tool was the seemingly easy way to make a floor plan for our real estate listings.
I work at a quarry and need this to get accurate measurements inside tight spaces. When measuring inside a tiny 1 ft space, does this tool account for the length of itself at the base?
Yes, you can easily adjust from 3 different measuring points of the unit itself. I believe it has where you can measure from the top, bottom, and center.
Can you set it to measuring in inches only? The one I’ve used before only gave me the foot and inches versus inches only. Found it a pain when blueprints say 104-7/8” I’m then having to convert 104 and 7/8 inch into what it equals in feet and inches. I like the technology but it needs to useful
Great video and great in depth review! I am from Australia imperial system does my head in I don't know how you guys deal with it in imperial - feet / inches lol - great video thank you!
@@MarkThomasBuilder Their reasons are probably that they've always used imperial and never tried metric. I'm 63 and here in the UK I used metric at school but I still come across people younger than me who claim not to understand metric! And the idea that a litre of water weighs 1kg seems to blown the minds of most people - especially when I'm cooking and I need to add half a litre of water to my bowl so I do it on the scales and add 500grams of water - they think it's like quantum theory or something and are totally confused!
I need to measure tree butts on log trucks to check for conformity. Safety rules keep us on the ground so we have to take measurements on the ground. Is there a laser tape measure for our limited uses?
It's possible to use it to mark out a horizontal line. I does have an angle measure if you hold it sideways. I recommend a cross line self leveling laser level for shelving. Once you buy it, you'll be glad to have it for future projects.
Question, Do you need to use the target cards always? If for instance you are going from wall to wall on a ladder, wont the beam have to be perfectly level to get an accurate reading?
Yes, it needs to be level to be accurate. It's similar to using a tape measure, you try to hold the tape level across a room as level as possible or measure on the floor. As far as the target cards go, they aren't necessary. They're for taping to something that doesn't have a surface for the laser to hit. For instance, if you're trying to measure the length of a hallway that takes a right right or left, you would stick this target card at the turn, so it sticks out a couple inches for a spot for the laser dot to measure from. Does my explanation help?
Thanks for the awesome and very helpful video. I just picked one of these up and am scratching my head at the pictograph instructions. Did you figure out how to sweep, scan, and capture the “minimum distance” which would be where the measurement is perpendicular to the target wall?
So, I'm looking for a laser meter where I can point it up from point A to point B and get a measurement and can't find any videos demonstrating that. For instance, standing on the ground and pointing up from 1 end of a gutter to another and get that length. Can this one do that?
Yes, it's call indirect measurements and it can do it. I've never tested it out that closely to see how accurate it is. I may have to make a quick video showing my results. I've had quite a bit of people ask about that lately.
I want to use one of those gadget to do survey on the property. As a landscape designer, i need distance and elevation at a precise area on the land. I need 150' to 200', longer the better. My concern is in direct sunlight. What do you recommend. Thank you
Bosch makes a model for outside and has a camera on it. I recommend you check out GLM400CL. It's rated at 400'. I also did a review on it a few years back.
I 100% will confirm in sunlight this laser is garbage. Ive tested it repeatedly against different backgrounds. Even in partly cloudy days its very hard to see 15 ft away
This laser is intended for indoor use. I have another Bosch LDM that's rated for outdoors. It's quite amazing, actually. I'll be reviewing it next Tuesday, so please subscribe to be notified.
I would personally use a tape measure for drywall cutting. The Bosch cross-line lasers work well for giving you a perfect bright green or red line for cutting.
How do you measure a window that you can't reach. Can I point and sweep across to get the distance and how wide and tall they are. I sell window treatments like shades.
These lasers do some type of indirect measuring, but I haven't tested to see how accurate they are in that respect. They're very accurate for room measuring.
Hi iv had my laser for 4 years and hardly ever use it cuz its always out by 3 or 4 inches please could you reply back and make a video how to callabirate it so its accurate to the inches please i would appreciate it
Bosch makes another one for outdoor that has a camera and screen. I reviewed one about 5 years ago and now they're intruducing a new and improved one which features a higher resolution screen.
You won't be able to see the dot in those conditions. They're really meant for outdoor use. Bosch makes another model, which I reviewed and it has a screen on it to see where the red dot is pointing. I believe it's the GLM400 model.
I need a laser to measure angle and distance at the same time up the side of a hill for the set up of a Ram water pump. Head and pumping distance. Can this do laser do this?
I haven't tried that angle measuring feature too much. It seems to be accurate though. I should clarify that it doesn't say what the angle number is, but gives you the distance based on the angle from the bottom starting point to the top point.
I am a track coach and want to use it to measure a shot put throw. My question does it have where you could subtract the distant of the center of the shot put ring and the toe board?
I have some signs and banners that are elevated and hanging inside a building. I don't know the size of them. Can this device measure them for me so I can get their dimensions? I need to know how long and tall the banners are so I can order replacements.
0:08 I want to use such a device with a plastic corner-cube reflector plate, which reflects THOUSANDS as much back in the direction of the emitter than a white paper-like surface. (See Lambertian reflector.) I want to measure 500, 1000, 2000 meters, with a resolution of 1 millineter . Problem is, I don't think the device will 'wait for' such a delayed reflection, even when it arrives late. And, of course, the display doesnt have sufficient digits to display this.
Hi Mark, can you please explain the orientation Front/middle / rear I am confused, how can you take a reading from the front how can you take a reading from the middle , how can you take a reading from the middle *can we see the see the settings for each please*
I believe the middle is if you have is mounted on a tripod. I never use that setting. I mostly use it from the rear as I'm trying to get the total room measurement. The front setting is handy if you're lining the front of the LDM with a line. It's also handy if you're measuring from something like an archway and you can put just the edge of the front of the LDM next to it and still get a laser measurement. Did that help?
@@MarkThomasBuilder I am enjoying this laser for my windows, great for measuring windows for blinds, curtains, I am in the market for them LED's going to install the on my 4 walls, so yeh ordering the proper length is really helping me out. Kool little device
That's a good question. I don't think there's any way it would work for that unless you went out at night and could see the red dot to do an indirect measurement.
If you're trying to hit a small target, maybe 20'. They make another one that displays an image and a target. I don't recall the model number, but I did a review on it.
Thanks. Can I ask have you found any variances in measurement in poor lighting conditions, does lighting affect readings as much as the differences in surfaces?
Thanks. I found your demo very useful and informative. I first bought a chinese made (Uni-T) distance meter, I noticed some variance in reading when measuring fixed objects (doorframe, cabinet wall) when I first turned it on, being 3-4mm off then later being within 1mm of my tape measure. I thought it was the lighting at first but it turned out to be the temperature (no kidding) since I noticed it became more accurate after about 3-5 minutes of using it. Swiftly exchanged it with a bosch glm40 and our local bosch service center has offered to replace it with a glm 500 because of an issue with the device.
No, only the red dot is visible. If you want to see the laser line, it can be done with a fog machine in dim light. It's kinda fun to try, especially with the 3 plane laser.
Hey Mark, I have the GLM 50 C and I need help on how to measure square feet inside of a house. I Have a cleaning business and I need on how to measure square foot, Thanks
Here's a link to a Bosch video featuring some answers to your question. This laser will definitely help speed your measurements, compared to a tape measure. ruclips.net/video/b8dVa1QPABM/видео.html
There's a way to measure the height, but you'd need to put a dot on the bottom of the tree and the top. You almost would have to do it at night to see the dot near the top. There are probably better ways to measure trees, but I"m haven't come across that yet.
I had really high hopes. I was super disappointed. I used this to measure from the tip to the base of my penis. Well the Bosch GLM165-40 was extremely accurate but still I’m very disappointed. By all means not disappointed by the device but, at myself…
I'm not exactly sure from corner to corner, since this is made to sit on a flat surface. You can get a close guess, but not super precise. If you had a 12" ruler, you could use that along with this to get a corner to corner measurement. The ruler will go directly in the corner and just add 12" to the measurement. Hope that helps!
Yes, they work well for that. I seen a carpet cleaning estimator use one inside a commercial building and it saves a lot of time getting the room sizes.
It's very easy. When you turn the unit on, I believe it automatically measures from the back of the unit. It also lets you toggle to measure from the front of the center, which is if you put it on a tripod. Just make sure it's measuring from the back and point it to the ceiling. You'll have a measurement in a few seconds.
I would also love to have one that will only measure to 1/16” and can you make the read out in inches only, like 165” 3/16 and not convert it to feet? I have a Bosch GLM 40 and that is my two biggest complaints. If this one will do those two things, I will go buy it tomorrow. @@MarkThomasBuilder
I am interested in this as well. It would be nice not to have to do fractional math every single measurement. The Amazon reviews say it stays on a 1/32 read out.
Square footage to calculate estimates for cleaning. I've been "by the job" but it's not working out for me. Not making money 😒 Payroll is costing too much, I need to adjust my pricing and square footage is the next step. Thanks for the video!
Got one of these today, 6-13-23. Damn helpful! Wow this saved me hours of fumbling around with a tape.
This thing is money I use it religiously and let’s say the masses of people are blown away by the versatility this tool offers.
It has the ability to read measurements and display them in any measurement form you desire... the Stake feature has got to be the coolest thing I find. Check it out in a video if you get the chance.
My only beef with this tool is that the batteries no matter what kind I use, even the best Duracell on the market, it always eats the batteries even kinda seems too when it’s not in use. Either way this tool is a must for professional people it cuts time of quotes and the fumbling of measuring tapes etc.
I'll have to look into the stake feature some more. Thanks for sharing!
My PLS-3 laser also eats batteries when not in use so I take them out between use.
@@donsmith9081 I just saw the newer ones are rechargeable with a micro USB or C style cable.
THANK YOU!! Nobody else on a review took a measurement AND a tape to compare the actual accuracy
That's interesting. The first thing I'd want to know about it is how it compares to a tape measure. I'm glad to see it's right on the money.
Amazon has them for $111
Just ordered one to use with the app. Own a home renovations company, so we are taking measurements all the time
I recall needing a measurement of approximately 70' inside a building and it took me about 55 seconds to do it by myself with a tape measure. The Bosch laser got the same measurement in only 5 seconds. It's amazing!
markthomasbuilder ....ive actually been using a bosch for about 3 years. The one I just ordered is the bluetooth version. It will auto list all my measurements so that I dont have to make notes. I actually use the bosch app to make all my initial notes and pictures, then send the “form” the app creates to google drive. That lets me keep all my project notes, pictures, and measurements with me on my phone
I just bought one on Amazon for $95. This is going to best the heck out of my manual tape measures.
Great video. Made comparison with GLM40 easy. Showed the benefits of less understood feature very well. e.g. use with smartphone to instantly add dimensions to an object in a picture. Thanks for sharing.
Thanks, glad to help!
I am old school.... you never see checking the accuracy of a measuring tape with a laser measurer, but you do see checking the accuracy of a laser measurer with a measuring tape.
I guess once their dialed in though, they are pretty cool, but for critical dimensions, I would always have to confirm it with a tape. Cheers.
Good point, I occasionally check the lasers for accuracy. So far the Bosch lasers are right on.
Yeah the ends of the tape measures wear out and you can be off by almost a 16th to an eighth of an inch in some cases
1 agree with you 100%. For something you can’t mess up I will always double check it.
Just brought one for Father’s Day he has been wanting it for a while now
This will make an awesome gift! It's pretty easy to learn the basics of how it works.
I came here because I couldn't figure out where to install the hand strap. Thanks for answering that and much more.
You betcha, glad to help!
@@MarkThomasBuilder This device is awesome. One of my measurements was 151 feet away. Great tool.
How much price
Very clear and thorough review. Thanks! I'm sold. Not having to bring a second person, and explain WHERE you want them to hold the "dummy" end of the tape measure: priceless.
The small size is great too. You can easily keep it in your vehicle or toolbox.
@@MarkThomasBuilder now that you've had the laser tape measure for a while how long is the battery life?
Problem I have with it is it is accurate to 1/16" but reads in 32nds. Transferring measurements I have to stop and think what equivalent 16ths it is. They should have just used 16ths. I put a piece of tape on back with different equivalents.
I wish they had just put it in decimal form like,.75" for 3/4 or. 437 for 7/16"'
By the way it is accurate to the 32nd
If the laser tool measures from its front edge…. Would you have to add the length of the tool to each measurement, for it to be accurate?
Is the an option to measure front the front vs back edge of the tool?
yes, you can change where the measurement starts there's 3 modes. rear, front and middle ( middle is for tripod mounting I believe )
This is thing is awesone!!!
Yes, I agree. I just used this earlier today to get some measurements in my garage for some tool storage solutions.
Thank you
You're welcome
Good video....I,m buyin one....showed some features I was not aware of including mapping app thank you
Thank you! I've been very impressed with all the Bosch lasers.
So easy a blind stoner can figure it out!! The hardest part was getting the batteries out cut off most my fingers on that!
Is it possible to switch it for SI units centimeters or meters? Thanks
Hi I have one and use a metal angle bracket you find for anchoring joists ,put it one the floor and the beam hits it and gives you the measurement. You get use to how to set it in relation to the corner very accrue
The laser has always give me accurate results. The only feature I haven't used yet is the indirect measurements.
It would be nice to see how the indirect measure function works.
I'm getting more and more requests for that lately. I may have to make a supplemental video.
Super helpful video thanks. I'm going shopping for one right now.
Thank you, glad to hear it! It's a handy tool and I like it's compact size.
Is there a Gage R&R study on GLM50 C? What is the +/- uncertainty level?
Thanks for your time
You bet!
LOVE YOUR VIDEO ABOUT THIS MODEL
IS THERE A NEW VERSION NOW 2021 THAT YOU RECOMMENDED TO ME
Thank you, I like the Bosch GLM400CL, which also works outdoors with a camera feature.
I bought this unit because it also includes angle measuring. It measures angles in degrees but I need percent slope (grade). I got an app for my iphone named "Handy Grade Converter" that converts angle to grade or vis versa. For checking ADA walkway grades I set this unit on a long standard level or straight board.
Thanks, I'll have to check that app out. I believe the grade is 1:12 for ADA ramps, correct?
So how does this work with the device calculating in its own distance? Like in the example of the 70 ft why was it not 60 feet 8 inches with 4 inches being the device distance.
Most can calculate from the front of the device or take into account if measuring from the back of the device
When you compared it to the actual tape it was off, so which one is accurate the tape or the laser?? If something is off by an 1/8 inch well that's not worth buying in my opinion.
1/8 is not a big difference
@@irvinanguiano944 when measuring from the garage door I noticed the tape was not particularly tight and had slack bits in it - certainly enough to give an error of a fraction of an inch
Thank you for a helpful video. I am trying to figure out Bosch's MeasureOn room diagram tool and would love to see a video shpwing hw to layout a room, including doors, windows etc. Their extremely short videos leave much to be desired. Thank you.
I agree with you. I tried the app, but couldn't figure it out enough to make a tutorial video about it. I'd like to see a more user friendly version.
@@MarkThomasBuilder I finally got a pragmatic customer support rep on the line and he directed me to: ruclips.net/video/OKHK5CA363Y/видео.html which is their European help site for the MeasureMaster app that is not available in the US, but is similar enough to give some pretty good guidance and, IMHO a good base for a talented RUclipsr to show us less capable folks how to make a really good layout plan. What attracted me to the tool was the seemingly easy way to make a floor plan for our real estate listings.
Awesome, thanks for sharing. I'll check it out.
I work at a quarry and need this to get accurate measurements inside tight spaces. When measuring inside a tiny 1 ft space, does this tool account for the length of itself at the base?
Yes, you can easily adjust from 3 different measuring points of the unit itself. I believe it has where you can measure from the top, bottom, and center.
Can you set it to measuring in inches only? The one I’ve used before only gave me the foot and inches versus inches only. Found it a pain when blueprints say 104-7/8” I’m then having to convert 104 and 7/8 inch into what it equals in feet and inches. I like the technology but it needs to useful
Great video and great in depth review! I am from Australia imperial system does my head in I don't know how you guys deal with it in imperial - feet / inches lol - great video thank you!
Haha thanks, I agree that the metric system seems much easier. Some people think imperial is better, but I don't remember their reasons.🤣
@@MarkThomasBuilder Their reasons are probably that they've always used imperial and never tried metric. I'm 63 and here in the UK I used metric at school but I still come across people younger than me who claim not to understand metric! And the idea that a litre of water weighs 1kg seems to blown the minds of most people - especially when I'm cooking and I need to add half a litre of water to my bowl so I do it on the scales and add 500grams of water - they think it's like quantum theory or something and are totally confused!
What is a realistic expectation of how far away you can see the laser dot in outdoor sunny conditions?
Thanks for the video.
Not too far outside in the sun. Maybe 15-20' in bright sun. Late in the day at dusk, no problem seeing a long ways.
I need to measure tree butts on log trucks to check for conformity. Safety rules keep us on the ground so we have to take measurements on the ground. Is there a laser tape measure for our limited uses?
Do you have or know of a video that shows step by step measuring of a complete room or house for creating a floor plan?
Sorry, I don't know of a good one. The Bosch MeasureOn app was a little confusing to me for creating a floor plan.
Can you please make a video showing this
does it convert to decimal inches or feet instead of fractions?
Do you have a video of utilizing the indirect distant measurment feature? Thank you.
I didn't test that feature for accuracy. I'd recommend checking the Q & A section of the Home Depot reviews.
Is it possible to use the device to establish a level line on a long wall for shelving?
It's possible to use it to mark out a horizontal line. I does have an angle measure if you hold it sideways. I recommend a cross line self leveling laser level for shelving. Once you buy it, you'll be glad to have it for future projects.
Question, Do you need to use the target cards always? If for instance you are going from wall to wall on a ladder, wont the beam have to be perfectly level to get an accurate reading?
Yes, it needs to be level to be accurate. It's similar to using a tape measure, you try to hold the tape level across a room as level as possible or measure on the floor. As far as the target cards go, they aren't necessary. They're for taping to something that doesn't have a surface for the laser to hit. For instance, if you're trying to measure the length of a hallway that takes a right right or left, you would stick this target card at the turn, so it sticks out a couple inches for a spot for the laser dot to measure from. Does my explanation help?
Thanks for the awesome and very helpful video. I just picked one of these up and am scratching my head at the pictograph instructions. Did you figure out how to sweep, scan, and capture the “minimum distance” which would be where the measurement is perpendicular to the target wall?
Thanks, I'm thinking that you're asking about indirect measurement? I haven't really tried it much. I normally use this for estimating room size.
What about steel fabrication ?
So, I'm looking for a laser meter where I can point it up from point A to point B and get a measurement and can't find any videos demonstrating that. For instance, standing on the ground and pointing up from 1 end of a gutter to another and get that length. Can this one do that?
Yes, it's call indirect measurements and it can do it. I've never tested it out that closely to see how accurate it is. I may have to make a quick video showing my results. I've had quite a bit of people ask about that lately.
Does it measure volume and area
Does it have a red dot laser to see where you are pointing the measurment?
Yes, that is correct.
at 9:21, how do you measure? I heard 2 beeps, did you use the length or indirect? I can not get either one to measure correctly...
Half way through this video, I bought one on Amazon....
Haha, that's awesome to hear. I'm often working by myself, so this makes measuring thing quick and easy.
I want to use one of those gadget to do survey on the property. As a landscape designer, i need distance and elevation at a precise area on the land. I need 150' to 200', longer the better. My concern is in direct sunlight. What do you recommend. Thank you
Bosch makes a model for outside and has a camera on it. I recommend you check out GLM400CL. It's rated at 400'. I also did a review on it a few years back.
Can you see the laser in day light and how long is battery life? I need it for when I'm on a lift 30+ feet in air to do elevations
I 100% will confirm in sunlight this laser is garbage. Ive tested it repeatedly against different backgrounds. Even in partly cloudy days its very hard to see 15 ft away
Can you show how you can measure height of a building facade & possible angles? Thank you.
I tried that feature a few times and it seems pretty accurate. Sounds like a good video idea. Thanks!
Hi, how is it for exteriors? does the sunlight makes the measurments harder?
This laser is intended for indoor use. I have another Bosch LDM that's rated for outdoors. It's quite amazing, actually. I'll be reviewing it next Tuesday, so please subscribe to be notified.
What is the least count of GLM 50 C in mm (millimeter)?
What if I’m measuring cutting dry wall.. will I be able to make my lines for a perfect cut?
I would personally use a tape measure for drywall cutting. The Bosch cross-line lasers work well for giving you a perfect bright green or red line for cutting.
Very nicely explained. Thank you!! I bought it...
Glad it was helpful, thanks!
Great video, I have the same one, how do i get the tool to give me inches like yours? mine gives me a percentage of a foot instead of inches. Thanks
I'm not by the Bosch laser at the moment. I believe you press and hold the function button to make that change. Does that help?
Let see you make some measurement outside in bright sun.
That's the struggle, unless you're able to aim at something big like a big wall. You can see the red dot up to a certain point on cloudy day.
How do you measure a window that you can't reach. Can I point and sweep across to get the distance and how wide and tall they are. I sell window treatments like shades.
These lasers do some type of indirect measuring, but I haven't tested to see how accurate they are in that respect. They're very accurate for room measuring.
Would this work for measuring the inside dimensions of windows or other boxes? That’s always hard with a tape measure.
Mark 5 inches short measure to the line then add 5 to your number
Does it need calibration?
Hi iv had my laser for 4 years and hardly ever use it cuz its always out by 3 or 4 inches please could you reply back and make a video how to callabirate it so its accurate to the inches please i would appreciate it
Sorry I'm not sure how to fix that. I've never had to calibrate mine. I would suggest reaching out to Bosch and see if they can help.
@@MarkThomasBuilder thank you for replying
Can it be used for outdoors?
Bosch makes another one for outdoor that has a camera and screen. I reviewed one about 5 years ago and now they're intruducing a new and improved one which features a higher resolution screen.
How do they perform in bright sunny day? Thanks
You won't be able to see the dot in those conditions. They're really meant for outdoor use. Bosch makes another model, which I reviewed and it has a screen on it to see where the red dot is pointing. I believe it's the GLM400 model.
I need a laser to measure angle and distance at the same time up the side of a hill for the set up of a Ram water pump. Head and pumping distance. Can this do laser do this?
I haven't tried that angle measuring feature too much. It seems to be accurate though. I should clarify that it doesn't say what the angle number is, but gives you the distance based on the angle from the bottom starting point to the top point.
I am a track coach and want to use it to measure a shot put throw. My question does it have where you could subtract the distant of the center of the shot put ring and the toe board?
I don't think so, but I can see why you would want that feature.
I have some signs and banners that are elevated and hanging inside a building. I don't know the size of them. Can this device measure them for me so I can get their dimensions? I need to know how long and tall the banners are so I can order replacements.
As long as you can point the laser dot to the end of the thing your measuring, you're all set.
Does it measure in millimeters?
Yes
0:08 I want to use such a device with a plastic corner-cube reflector plate, which reflects THOUSANDS as much back in the direction of the emitter than a white paper-like surface. (See Lambertian reflector.) I want to measure 500, 1000, 2000 meters, with a resolution of 1 millineter . Problem is, I don't think the device will 'wait for' such a delayed reflection, even when it arrives late.
And, of course, the display doesnt have sufficient digits to display this.
Is the red laser bright enough to see in outdoor use at 30ft ish
Not really, unless you do it at dusk. They make a camera laser for outdoor distance measuring.
Hi Mark, can you please explain the orientation Front/middle / rear
I am confused,
how can you take a reading from the front
how can you take a reading from the middle
, how can you take a reading from the middle
*can we see the see the settings for each please*
I believe the middle is if you have is mounted on a tripod. I never use that setting. I mostly use it from the rear as I'm trying to get the total room measurement. The front setting is handy if you're lining the front of the LDM with a line. It's also handy if you're measuring from something like an archway and you can put just the edge of the front of the LDM next to it and still get a laser measurement. Did that help?
@@MarkThomasBuilder Maybe I quick demo would be better, I do not know what is LDM?
@@MarkThomasBuilder I am enjoying this laser for my windows, great for measuring windows for blinds, curtains, I am in the market for them LED's going to install the on my 4 walls, so yeh ordering the proper length is really helping me out. Kool little device
Price please
Hey there I have one of these and was trying to figure out how to either fix it or sell it because the screen is cracked :/
Humm, not sure what to do if that happens. I'd contact Bosch and see if they offer a repair option.
@@MarkThomasBuilder thanks! I’ll check that out :)
Can you measure a roof from the ground to figure out Christmas lights under the gutters?
You should be able to get the distance from the ground to the roof soffit, if that's what you're asking about?
@@MarkThomasBuilder Looking to get the distance from left to right along a rain gutter. Installing Christmas lights and need to measure. Thanks
can we measure the Angle on them
It measures angles too in the level feature.
could you shoot the top of a tree to determine height?
That's a good question. I don't think there's any way it would work for that unless you went out at night and could see the red dot to do an indirect measurement.
Cool, I'll give that a try.
Works like charm..
Hello. Does this laser meter work when the weather is foggy? Thanks
That's a good question. I have cold snowy weather now and no fog to test it in.
@@MarkThomasBuilder Thanks. 🙏
Hi, how far can you measure outdoors in a sunny day. Thank you
If you're trying to hit a small target, maybe 20'. They make another one that displays an image and a target. I don't recall the model number, but I did a review on it.
how accurate is your tape measure ...?
Do they work outside?
You can see the red dot from 20' away on a partly cloudy day. The best laser measurer for outdoor use is the Bosch GLM400CL.
how much the batter backup
Thanks. Can I ask have you found any variances in measurement in poor lighting conditions, does lighting affect readings as much as the differences in surfaces?
I haven't noticed any variances. I'll have to keep an eye out for that and get back with you.
Thanks. I found your demo very useful and informative. I first bought a chinese made (Uni-T) distance meter, I noticed some variance in reading when measuring fixed objects (doorframe, cabinet wall) when I first turned it on, being 3-4mm off then later being within 1mm of my tape measure. I thought it was the lighting at first but it turned out to be the temperature (no kidding) since I noticed it became more accurate after about 3-5 minutes of using it. Swiftly exchanged it with a bosch glm40 and our local bosch service center has offered to replace it with a glm 500 because of an issue with the device.
Does it measure in Feet decimals or feet and inches?? like 4'11"?? thanks
Feet and inches. I haven't checked lately to see if there's other units of measurement.
Great video friend...could you please explain how to use the wall area feature and indirect feature
Is the laser visible ?
No, only the red dot is visible. If you want to see the laser line, it can be done with a fog machine in dim light. It's kinda fun to try, especially with the 3 plane laser.
How is the battery life
I don't know how long it runs, but the batteries seem to last a decently amount.
Hey Mark, I have the GLM 50 C and I need help on how to measure square feet inside of a house. I Have a cleaning business and I need on how to measure square foot, Thanks
Here's a link to a Bosch video featuring some answers to your question. This laser will definitely help speed your measurements, compared to a tape measure. ruclips.net/video/b8dVa1QPABM/видео.html
Does it read below a meter, means does it work for read cm ?
yes, you can switch between metric and imperial.
@@MarkThomasBuilder Thank You
Greetings of peace, I'm a plumber by trade how can I use this device to measuring and cutting pipe more accurately?
It's hard for me to say without seeing what you're doing. It puts a very accurate dot on the thing you're measuring. It's meant for indoor use.
My question is can i use the GLM50C to measure trees?
There's a way to measure the height, but you'd need to put a dot on the bottom of the tree and the top. You almost would have to do it at night to see the dot near the top. There are probably better ways to measure trees, but I"m haven't come across that yet.
Best to use an app on your phone. Especially a newer phone
How to measure square or other shapes
It does some indirect measuring. I haven't really used that feature to test the accuracy.
I had really high hopes. I was super disappointed. I used this to measure from the tip to the base of my penis. Well the Bosch GLM165-40 was extremely accurate but still I’m very disappointed. By all means not disappointed by the device but, at myself…
Can I get square using this
How should I hold it corner to corner and if I put it in one corner where the dot hits is that a straight line
I'm not exactly sure from corner to corner, since this is made to sit on a flat surface. You can get a close guess, but not super precise. If you had a 12" ruler, you could use that along with this to get a corner to corner measurement. The ruler will go directly in the corner and just add 12" to the measurement. Hope that helps!
These are only good when you have to really measure a long length vs. a regular measuring tape.
Yes, they work well for that. I seen a carpet cleaning estimator use one inside a commercial building and it saves a lot of time getting the room sizes.
Good review. How do you measure floor to ceiling?
It's very easy. When you turn the unit on, I believe it automatically measures from the back of the unit. It also lets you toggle to measure from the front of the center, which is if you put it on a tripod. Just make sure it's measuring from the back and point it to the ceiling. You'll have a measurement in a few seconds.
How do you turn it off ?
Press and hold the red button.
How can I get one to buy?
I provided a link down below in the video description.
hi, please update upcoming Bosch professional laser Measurement 2019 - long length - india
My next Bosch Laser video will be out in 3 days. Please subscribe to be notified.
I must be doing something wrong mine is about an inch or two off :(
Are you familiar with the measuring setting from the front, middle, or back of the laser?
@@MarkThomasBuilder I am now, thanks for pointing that out.
its measured meter & foot
the part inch must be a nightmare to work with 40 ft 1/36 inch. what? 😂
I mostly use this for general measurements, but it is very accurate.
so its accurate to a 16th but shows 32nds? what is the point of that? anyone figure out how to turn 32nds off and have it round to the nearest 16th?
That's a great question. I'll have to look into that and let you know.
I would also love to have one that will only measure to 1/16” and can you make the read out in inches only, like 165” 3/16 and not convert it to feet? I have a Bosch GLM 40 and that is my two biggest complaints. If this one will do those two things, I will go buy it tomorrow. @@MarkThomasBuilder
I am interested in this as well. It would be nice not to have to do fractional math every single measurement. The Amazon reviews say it stays on a 1/32 read out.
too much stuff. I just want a laser tapemeasure to measure out 16 feet across a room to lay out can lights.
I understand that. I never use some of the advanced features like indirect measurements.
Wish it was rechargable. It has all the tech but still uses AAA batteries.
The batteries seem to last a long time. Home Depot has some good deals on Energizer batteries.
Corroded batteries destroyed mine 😫
Using a wrinkly old imperial tape laid on the rough ground 😂fml !!!
🤷♂️😂
Are you ready to trade in your 100' tape measure for the laser? If so, what type of work would you measure with it?
Square footage to calculate estimates for cleaning. I've been "by the job" but it's not working out for me. Not making money 😒 Payroll is costing too much, I need to adjust my pricing and square footage is the next step. Thanks for the video!