I have been making knives for a couple of years but still find myself at my workbench or desk and do not have a knife handy. I decided that I needed to make several to lay around. This is the perfect idea, small, utility, easy to make, and made of scrap....perfect. Thanks again my friend for sharing your ideas.
That just shows how great of a knife DESIGNER you are. You started grinding and the shape just came out of the steel like it was meant to be lol. Beautiful little knife
Splendid little knife. Someone else has already said it, but the full two-hours and seven minutes unedited would be a great thing to watch … That was a hint.
I’m so glad I have discovered your page!!! I’ve been making knives off and on for a few years now, nothing really major, but as of late I decided to start back to making them in more of a serious manner and watching your RUclips videos inspires me to really work harder at it and take my time. I’ve got about 15 blanks I’ve cut out and a couple I’ve finished up out of that batch and they have turned out really well and they’ve turned into something I can really be proud of. They’re nothing fancy, but they are tough knives and hold a really good edge even after I have beat the crap out of them to make sure they hold up and to make sure I have my heat treating steps down and consistent. Thanks for the inspiration and keep up the great work!!!!!
Can you please share a short video on how you made that block you used to get the angle grind on the blade? I have a hell of a time trying to do it by hand and you just used a block and C clamp angle locks? Thank you
Nnnice little knife - Adorable as my granddaughter would say!! Handy EDC to slip in a leather pouch pocket sheath. Great build presentation - Thank You - Stay safe!!!
I really like this. So cool anytime you make an off shoot (one of a kind) type. Really good work, and feel like I can learn by watching your various steps and techniques. Thanks for sharing!
Beautiful knife, I would love to own it if you ever decide to let it go. Also, I agree with the above comments, a slim little kydex sheath would make this a perfect neck knife.
Thank you, I appreciate that. We’re doing great, and everyone is happy and healthy. I’ve been focusing on getting caught up on my knife orders and decided to leave the videos alone for a while. I’ve even disabled the custom knife ordering portion of my website just so I can get better caught up. Thanks again for checking in and I hope you and yours are doing well. Cheers👍
Jeremy, I love this little blade. If you could make a sheath so I could wear it as a neck knife I would love to purchase it from you. Stay healthy and GOD bless
I will never get tired of watching a belt grinder chew away metal like that! I long for the days when my 1x30 gets a upgrade and I join the cool 2x72 club haha. Great video!
Some of the most rewarding projects are the off the cuff ideas. I like everything about that little knife, it would make a perfect fixed blade pocket knife in a nice leather sheath. I am guessing about 5-5 1/2" ?
I really like it. It’s speed range is really impressive. I’m going to measure the surface speed but I’m pretty sure my other one isn’t nearly as fast. 👍
I have been making knives for a couple of years but still find myself at my workbench or desk and do not have a knife handy. I decided that I needed to make several to lay around. This is the perfect idea, small, utility, easy to make, and made of scrap....perfect. Thanks again my friend for sharing your ideas.
Honestly one of my favorite knives you’ve made! The simplicity just makes it so amazing to look at! I wish I had one!!
That just shows how great of a knife DESIGNER you are. You started grinding and the shape just came out of the steel like it was meant to be lol. Beautiful little knife
A fantastic diversion from the crisis we are all in at the moment.
All the best from Australia.
Thank you! All the best to you as well 👍
So very true!
That belt sander is awesome
Very nice little knife 👍🏼
How is everyone talking about the knife and not the fact that this guy has incredible handwriting
Splendid little knife.
Someone else has already said it, but the full two-hours and seven minutes unedited would be a great thing to watch …
That was a hint.
Nice. And the jazz at the end is killer too.
Probably my favorite small knife on the Chanel yet! I can think of a million uses for this little guy as an edc piece. Well done!
Now all that little guy needs is a nice kydex pocket sheath with a thumb ramp, and a minimalistic lanyard.
This was fun to watch. I've seen enough of your videos to make the steps you take. The free hand was fun to see. Stay healthy.
Thank you very much. I appreciate that. You stay healthy and happy as well 👍
nice to see the new grinder in action!
Yeah I’m so stoked it have it ready for work 👍
@@Simplelittlelife Sweet little knife too BTW
Super impressed with your progress over the years. Top notch. Practical. Pro-grade man. Really stellar. This build is one of my favs.
amazing little knife. wish I had your knowledge
Thank you.
I’m so glad I have discovered your page!!! I’ve been making knives off and on for a few years now, nothing really major, but as of late I decided to start back to making them in more of a serious manner and watching your RUclips videos inspires me to really work harder at it and take my time. I’ve got about 15 blanks I’ve cut out and a couple I’ve finished up out of that batch and they have turned out really well and they’ve turned into something I can really be proud of. They’re nothing fancy, but they are tough knives and hold a really good edge even after I have beat the crap out of them to make sure they hold up and to make sure I have my heat treating steps down and consistent. Thanks for the inspiration and keep up the great work!!!!!
Where in Texas you at? I'd be happy to help you test out any of your blades! and do you sell your fine worksmanship?
Amazing work sir, thanks for the links to the rotary tool and the checkering file... two items I wanted after watching this video.
Brother, I love your videos so much. Thank you!
Thank you so much, I really appreciate that! Cheers👍
Nice handy little knife. You could get many uses out of this.
Very cool love the horizontal grinder
Sweet little knife
Great build you are truly and artist
Wow! Love that little knife, great job!
Beautiful! Nice job! Nice workshop!
Gorgeous little knife.
Good ol' Strathmore Alberta, some of the best tools I've ever owned have been from small towns in Alberta.
Hey right on! 👍
Can you please share a short video on how you made that block you used to get the angle grind on the blade? I have a hell of a time trying to do it by hand and you just used a block and C clamp angle locks? Thank you
Bonjour, vraiment super ce petit couteau !!!
Je l'adore !!!
That's one cool little knife, great job 👍
Very nice mate. Thanks for the video. What do you call the file used for the grooves on the back of the knife?
Thank you very much. It’s a checkering file size 00 (or 20 TPI). I have an affiliate link in the description.
Simple Little Life thanks mate.
I want a grinder like that! Shoutout from New Zealand!
Legacy Tool works yeah, would love to find the video for the grinder build.
Love your vids man. They are exactly what we need to see to get by in these isolation days. Keep safe and stay home.
beautiful work sir, and nice song jazz to finish
Love the finish on it
That is a sweet EDC.
I love fixed blades. Carrying them is what’s most difficult. Making a fixed blades as easy to carry as a folder.
Awesome video !
Thank you!
Such a beautiful little work of ergonomic art from a strip of steel... thank you for sharing your artistry!
Piece of cake......... for you. Nice blade Jeremy
It looks amazing.
Nnnice little knife - Adorable as my granddaughter would say!! Handy EDC to slip in a leather pouch pocket sheath. Great build presentation - Thank You - Stay safe!!!
I really like the proportions, almost like a tactical camp butter knife 😁
Pretty awesome, great shop setup.
that knife is beautiful
You should do more "free form" builds. Just metal and imagination.
I just love everything about that little knife... and the video. Great stuff. Many thanks!
Looks great! God bless!
Nice. An useful little knife. Beautiful shape. You have very good tools, and you are very handy. Try something more difficult and unusual!
Little Genius I Say
Bravo 🙌🏼
You made something very useful with very good shape with such small piece of matirial which normally get thrown by people .
I consider this the inspiration to make something cool! Thanks man
Beatiful Knife. Congratulations !
I really like this. So cool anytime you make an off shoot (one of a kind) type. Really good work, and feel like I can learn by watching your various steps and techniques. Thanks for sharing!
@simplelittlelife, whats the name of the file that you used in minute 3:45?
I don’t know the time stamp exactly but it’s probably a checkering file 👍
@@Simplelittlelife ooohh, Ill have to check it in spanish. Thanks, Jer
Beautiful knife, I would love to own it if you ever decide to let it go.
Also, I agree with the above comments, a slim little kydex sheath would make this a perfect neck knife.
simple yet functional just love it. pulse it will be a great EDC
Haven't seen a video from this or your other channel in a while. Just wanted to check in on ya. Hope you and your family is staying safe and healthy
Thank you, I appreciate that. We’re doing great, and everyone is happy and healthy. I’ve been focusing on getting caught up on my knife orders and decided to leave the videos alone for a while. I’ve even disabled the custom knife ordering portion of my website just so I can get better caught up. Thanks again for checking in and I hope you and yours are doing well. Cheers👍
Great knife!
Love that finish..
Nice build
Jeremy. by any chance do you still have available the blade scibing jig
Another great video! Thanks.
Very nice useful little knife....
Very nice work. I was especially interested in the quench. I wondered if O-1 needed an air quench, like O-2.
O1 and O2 have the same heat treat. I do not think that O2 needs an air quench.
Very Nice!
Very cool knife!
excelente ese pequeño cuchillo que tipo de lima es esa
Nice job
Thank you
This video is the reason I subscribed! You have a new fan for life
Thank you so much! 👍
Does anyone know where I could get one of those jigs? honestly that’s my favorite jig I’ve seen yet.
Great little knife... will have to play with my scraps. What did you use for the gimping???
Found the file...guess I need to read the details...LOL
Jeremy, I love this little blade. If you could make a sheath so I could wear it as a neck knife I would love to purchase it from you.
Stay healthy and GOD bless
What was the white stuff you rubbed on your file at 4:01?
It is chalk. Helps keep the file from loading up 👍
I will never get tired of watching a belt grinder chew away metal like that! I long for the days when my 1x30 gets a upgrade and I join the cool 2x72 club haha. Great video!
What belt grinder are you running, if you don't mind me asking?
It’s the Black Fox One grinder. Absolutely love it!
@@Simplelittlelife sweet! I appreciate the response.
Some of the most rewarding projects are the off the cuff ideas. I like everything about that little knife, it would make a perfect fixed blade pocket knife in a nice leather sheath.
I am guessing about 5-5 1/2" ?
Amazing good job
Thank you.
Howzabout a link for that belt sander? I haven't seen that before...very versatile!!!
Beautiful little looking knife. I like it. Good Job 👍😉
Can anyone tell me what kind of file that was used for the grip on top? Cheers
It’s a checkering file 👍
@@Simplelittlelife thank you mate!
Awesome informational educational video experience Y'alls
What is the sharpening jig you are using?
@@Simplelittlelife At 8:50 what is the sharpening jig you are using?
ruclips.net/video/6U8dd1ZzjTgj/видео.html
Where can I buy the file that made those finger grooves at the spine-top? Great video!
Awesome I wish I could have such skill!!!
Looks like you got some shots with your new lens. Very cool little knife. 👍
Thank you! I’m pretty happy with it. Great for this type of in tight detail shots👍
1:23 you should try to make your bevels with the grinder horizantally like that, the big wheels will give very interesting plungelines
great job and video!
Nice little edc!
Awesome! Stay safe!
Thank you! You too 👍
What do you use to secure the knife to the rod when you're doing FC, is it metal wire?
Yup 👍
@@Simplelittlelife What're the odds of it getting eaten through by the FC and possibly diluting the FC?
I wish we could get more content. I miss these videos
Very cool! How do you make the little stencil? Thanks!!
What is the thickness of the O1 steel you started with?
very cool make. nicely done!
How long does the quenching heat preservation last?
What is the fluid you treat the knife in before you do the rock finish? Also where do you get it?
Good and beautifull job
What sharpening system were you using in this video if you don't mind me asking?
Nice little knife. I just received an order of O1. I'm looking forward to playing with it.
How do u like ur new grinder jeremy
I really like it. It’s speed range is really impressive. I’m going to measure the surface speed but I’m pretty sure my other one isn’t nearly as fast. 👍
@@Simplelittlelife sweet