@@ImWateringPSUsciao scusa ma una domandina. Ma se invece io su msi afterburner vado su power limit e metto da 100% a 90% ottengo praricamente lo stesso risultato la temperatura va giù di brutto. Non e la stessa cosa in pratica che fai te ?? Perche tu limiti solamente in un altro modo o sbaglio?? Ps.. Oppure ho pensato e se invece solamente in una altra maniera si puo invece usare opzione temp limit. Se notebook scalda troppo basta mettere power limit a 75c° gradi o quello che vuoi e se a posto lui fa tutto automaticamente! O sbaglio??
Maybe the performance won't be the exact same but it won't affect my card iin a bad way right? Should i try it, and if anything happens bad, I'll reset??@@nyxreverse2644
Around 800- 1750 was sweet spot on Lenovo Ideapad Gaming 3 dropped to 67- 68 from 80 degrees. Thank you:) Also your pronounciation is one of the most understable one heard before. Thanks again.
Bro, your video's of undervolting the 2060 and 3050 helped me a lot, i undervolted both my pc rtx 2060 and my laptop 3050 and i gained some fps and low temps, so over all your videos in the tech tips zone are 100% pure gold bro, keep up the good work.
On my 3050 Ti / ryzen 5600 Lenovo gaming 3 power limit was enables at 83W (stock) at the benshmark. After undervolting i have 53W and be under limits. More silenence, and more power for CPU. SETUP: CC -300MHz, 850mV / 1900MHz. THANK YOU!
Thanks man, im on an rtx 3050ti and was able to get as low as 0.845mv, my temps dropped like 10°c when gaming, unigine benchmark scores did improve slightly and I noticed the temps were stable and not fluctuating like before which indicates there's less thermal throttling. One other thing I would advise others is after you've observed that the GPU is stable, before you save the settings in MSI afterburner use those settings and play any demanding game for like an hour, sometimes you might go 30-40 minutes before experiencing a crash, in which case increase the voltage by 10-15mv and try again. If after 1 hour of playing a demanding game you have no crashes then the undervolt is perfectly stable. Another thing you can also do to control your gpu temps is by limiting your fps, for example if a game is getting 90-100 fps, the temps will drop if you limit the fps to 80
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel! Great advice you gave btw :)
Thx mate you are a saviour its 40c outside here in india when i play elder ring my gpu was touching 85-87c right now it, 73-75c i am using 825 with 1800mhz👍
I recently got a second hand tuf laptop with a Ryzen 4800h and 3050, I managed to get 1820 at 825 and definitely a good 7-10 degrees cooler, the turbo setting from Asus software allows the card to to 1950 but any sort of undervolt at that power crashes games instantly.
Great results there! 1950 is definitely too high for a laptop, it’s probably sustained for just a handful of seconds. Some desktop cards don’t even go that high😂 Great job with the UV!
Thank you for this video! I didn't realize how beneficial undervolting was until this video. I am now able to get the same performance at much lower TGP, or same TGP, and much more stable performance! Sadly, Laptop CPU's are locked from undervolting, wish I could do that as well.
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel! if you have a Ryzen laptop, I actually do have an undervolting tutorial!
@@sreeravi25if you have ryzen cpu download ryzen controller and reduce your cpu wattage to 29 and 30 that will reduce your cpu temps by a massive margin
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!
I open any application and my interface freezes... It would be great if you could help me. After I click on the application, the laptop starts making noise and freezes. It turns on normally via the button.Асер Nitro 5
I have an Asus Tuf A15 with an RTX 3050 and Ryzen 5 4600H, every spot that I try to do gets stuttered and then freezes. Any help thanks . Ive tried to do 775 with 1800, 800 with 1800 and 825 with 1800 so far
Great video. I have a Dell G15 with Ryzen 5 5600H and a RTX 3050 (4GB RAM and 80W). I set the UV to 825mv and 1800 Mhz and tested the temps and wattage in FF VII Remake locked at 90FPS and got this results: without the UV 85ºC and 78W - with the UV 71ºC and 48W, a fantastic result, thanks for that. Keep up the good work. Edit: Now I tested the same game but locked at 60FPS and got 62ºC and 40W with the UV.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
@@ImWateringPSUs Can I use 800 mV for the same specs laptop mentioned above? will it cause trouble? Or I just hit and try with 800mV/825mV? Update: while playing overwatch, the game froze. The game hasn't frozen ever in my life except just now. Settings were 825mV at 1800mhz with -300.
@@sahilk.shinoda Unstable overclock you need to go higher mv try 825 and work your way up if it keeps crashing or lower the mhz at 800. This is a normal part of testing an undervolt for stability. Your laptop is fine. It's not getting hurt; for testing, I don't recommend enabling the start with Windows function until you ensure it's 100% stable across a few games.
Hey!! wanted to tell you that this helped me but when i did the first method after that when i launched the game the usage and temp of GPU from the MSI Monitoring disappeared but the game worked fine no FPS drops everything was good, then i did that 825 and 1800 method that worked too, when i played the game after some hours (i shutdown my laptop) on the monitoring the usage and temp appeared automatically and after playing for 30-40 mins the fps dropped and game started lagging then i went back to the curve and took it to 775 and 1700 after that no stutters were seen any idea why that happened and why GPU usage and temp were lost when i first did the tutorial?
if you have an Nvidia gpu then right click on your windows screen and select Nvidia control panel and go to manage 3D settings, search for power management mode and select "prefer maximum performance". if it is still not using maximum wattage then your PC/laptop is experiencing thermal throttling and most likely needs a thermal paste re-paste.
@@skittledoge6049 No, it was just a driver issue. I installed an older graphic driver and now my GPU works properly. I noticed that some drivers are not fully compatible with my RTX 3050Ti GPU. So I decided not to upgrade my graphic driver again.
wow thanks man..just finished cleaning n repasting my acer nitro 5 and now thats ram is cheapr i decide to upgrade to 32gb ram...then decide to play plaque tale requeim..this game use 12-15gb of my ram..to my surprise,playing in 4k dlss performance mix ultre mid high low. i can locked my fps to 50..graphic look super amazing..im using rtx 3080 100watts locked at 1800gpu clock 825 voltage..my temp only 61-63..my cpu is ryzen 9 5900hx and the temp around 71-74c.. i'm super satisfied with the performance n temp..
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!
I CHANGED ALL THE SETTINGS AS U DID AND I ALSO HAVE A RTX 3050 BUT STILL ON THE MAIN PAGE OF AFTERBURNER THERE IS NO SIGN OF CHANGE CPU CORE REMAINS 1500MHZ ONLY WHY?
I have same laptop with rx6500m but Masi Afterburner doesn't show anything like clock speed, memory speed, curve graph. When I switch to igpu then it then everything show but I need to undervolt dgpu. So help
Thank you! Temperature is now normal, but I have a question. Sometimes, even rarely, only a single game "New World" can suddenly stop responding together with some programms, so I cannot even restart my laptop without holding power button. In all other games everything is perfect. Should I change something or isn't it bad for my laptop, when it freezes like that?
Hmm, not sure what i did wrong in this, temp wasn't lowering. At 800v 1700 mhz my GPU slowly increasing it's temp from 65 to 86% in just 3 or 4 mins. Like what's the point in undervolting if my GPU temp isn't going down yet im using way less power. Same specs as you had I5 - 11400H RTX 3050
you'll see the temperature diffrence in games i had the same issue but in elden ring with stock settings my gpu was at 80c but at 775mV and 1700mhz it dropped down to 68c with minimal fps loss!
Can you please make a video on overclocking a 1660ti laptop or this 3050 to get the most performance with no care for temps? I have a huge fan underneath my laptop so it never gets over 60 celcius anything I throw at it. So I was wondering what maximus juice I could get of performance out of it.
Unfortunately with laptops, performance is very tied with temperature, so you don't get the best performance if you let them run at a temp that's too high. I'll definitely make a video for the people with a big thermal headroom tho!
nice video! but after applying these settings, i dont see any significant drops or changes in my cpu temp, tried throttle stop too but nothing seems to work.
i'm good with the first one, all laptop's gamers are scared of getting a serious problems with their devices cuz of the maintenance costs a lot of money
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!
i have laptop with amd ryzen 7 5800H with 3050 and my base CPU clock is 1057 MHz, is there any setting that could get mine to 1672 Mhz like yours? or something is wrong with my software?
Why doesn't the GPU2 voltage option appear in the Afterburner monitoring section (in this case my RTX 3050 Ti)? I can't see the voltage data while playing or performing any tests. Also on the main screen of Afterburner, the left voltage option is blocked, to modify the voltage I must go directly to the curves box and modify frequencies and voltage. Can someone tell me why the voltage option does not appear in monitoring?
Please help me. I've undervolted my laptop to 825mV and clocks to 1800mHz, but whenever I play Palworld or anything the clock drops to 1200mHz or lower. Temperatures rise to the throttle limit and I can't do anything about it. My laptop brand is Asus and the GPU is 3080TI Mobile.
Does GPU TDP matter when you have to set the minimum voltage? And what is your laptops' GPU TDP? I have Target 60w and maximum 75w gout TDP. So what settings are best.
@@ImWateringPSUs my udb is showing as UEFI and that the only usb. And when I click on it, its boot the window and take me to the normal window home page instead of the flashing bios step.
Hi there! Came back after 7 months to say that you have the best and the most helpful channel ive ever seen, After your tutorial my laptop runs everything veryy smoothly, God bless you sir! Oh yes and one more thing, i have the same laptop as yours, the victus 16 with a 3050, which preset do you use for gaming? Just wondering :)
this was VERY helpful! very well explained. and i have a victus 15 laptop with a 2050 im trying to get the most out of it. is undervolting better than overclocking? im looking for better performance while streaming gaming and running mods for games. running the HP VICTUS 2023 model with the RTX 2050 Ryzen 7000 series CPU and 24GB of DDR5 4800mHz Ram. thanks in advance for any advice!
850 works best for Asus Tuf F15 RTX 3050 FX506HC (Looks like this is the efficiency mode since having lower than 850 it crashes, and when I game with 850 it is extremely quiet while maintaining stable 60fps at highest settings GTA 5 1080p). This is nice for school when I cant fit my cooler into my backpack for gaming while being quiet as my PS5
@@elverhaha 1695mhz-1700mhz, getting around 65-70fps GTA 5 w/highest settings (Keep in note I have only 8GB of ram) while maintaining under 60 watts (56-58 watts average) from 70-75 watts average. Oh yeah actually I just found out/forgot that my or that specific laptop mentioned has a performance mode which automatically undervolts it, previously I was using turbo mode which utilizes 100% of the resources (instead of limiting the MHz/clockspeed of my GPU, the performance mode I believe this dynamically adjust the clockspeed based on temps probably it tries to keep it under 85 degrees which results in my laptop being quiter, it hovers around 1500-1800MHz while not limiting the GPU wattage). Also for the turbo mode/unrestricted mode, the clockspeed hovers around 1900-2000+MHz. It seems that it suffers a major throttling though? The FPS drastically drops compared to undervolted or performance mode, maybe this is really how a GPU works but not sure, but I’m just going to mention that.
most of the time it is stable followed everything you did but sometimes it crashes while playing and you have to restart the laptop but the guide is dope gpu temps were 86 now they dont go above 75
I have the victus 15 rtx 4050, Im a little confused because my numbers on the curve are higher so I dont know what number to go when you mention to go up to "1700"?
a bit late but since you have a more powerful card your max frequency will obviously be higher, look up what your max frequency is based on your wattage and card and set it to that instead of 1700 with the same voltage values
Thanks for the video mate. I already had some experience in undervolting my pc graphics, when I had to manually find the lowest working voltage so it doesn't crash. It did drop around 10C and some noise, but I did that then because the card is hot and running at 90C+ looked bad. Was it even an issue though on victus? I just got a victus 15 with rtx 3050 ti and didn't play anything yet, just did some tests and benchmarks. Highest temp was the cpu hitting 97C and since the heat goes from it via the tubes past the gpu it keeps gpu "warm", lmao. I still didn't see anything above 80C on gpu. Guess I'll try to undervolt just to check if it changes anything on laptop.
Well, just to update my experience. I turned off turbo boost and that dropped max cpu temps to 64C. Problem is at least my victus had win11 by default and that did not accept any settings in power management. Only started working on win10 but I barely found all the drivers since they are not available on hp website or anywhere. Win11 lets you fry your cpu up till 100C and win10 starts throttling at 95C (which makes me hate win11 even more now). As for gpu undervolting my patience ran out. MSI afterburner loads 1st cpu core always to 100%, not sure if anyone saw this too. Only on this laptop tho, pc works properly with afterburner in background. No point in undervolting what only heats up to 75ish but load the cpu in idle
Well, got my rtx 3050 ti to 1805MHz at 0.806V. 1820Mhz at 0.800 failed after some time so I gave it a bit of breathing room, seems stable. Iirc in stock it had 82C now 72C and maybe a bit less noise but just a bit (if loaded with heavy load fans are close to 90%). Guess it's worth it anyway. Read so many different comments about how the cpu/gpu in victus 15 are locked from undervolting but nah, all worked besides the cpu load from msi monitoring every 3sec
I mean, it depends on what you want to achieve. I went for lower frequency and voltage to get lower temps with acceptable performance. You can try playing with the frequency value on the curve to find a working value since the values can differ even on the same model. The worst you can get is a screen freeze, just click revert icon fast enough
@@zj29merka70 it depends. You cant jump above the maximum values. At best you can find a frequency/voltage ratio that works on same frequency but lower voltage. For increasing performance you'd want overclocking, but doing that on a laptop? I wouldn't do that.
I clicked Windows icon to Apply UV settings when Windows started but MSI Afterburner resetting to default settings after restarting my laptop. Reinstalled Nvidia driver and MSI afterburner and ım still getting the same issue.
Hello, I have this. I have the Power Limit and Temp Limit sliders blocked, although the video card is exactly the same as yours, and I did everything like you.
Hi bro i just bought a 15.6 hp victus with an amd ryzen 5 5600H and rtx 3050 I have a problem concerning the NVIDIA control panel, it doesnt show the display setting, I wanted to change my refresh rate from 60Hz to 144Hz but cant seem to do so, can you help me ? thanks
Hello, i was wondering why didn't you touch on vram overclock? I gained an extra 4-5 fps by just raising memory clock by 500Mhz at 900mv and 1995Mhz core
I don't see any changes in my msi afterburner in GPU clock speed even following whole tutorial step by step, it's still stuck at 1500Mhz for my rtx 3050, please help 🙏
Ciao, mesi fa ho fatto come nel video e mi aveva aiutato tantissimo le temperature erano 15 gradi in meno, il problema è che oggi ho dovuto formattare il laptop ( sempre un Hp Victus 16 con rtx 3050) e scaricando la app di msi afterburner non mi esce piu il grafico come era prima, mi escono due grafici, in piu quando sposto la barra core clock o memory clock mi ritorna automaticamente al punto di prima in mezzo secondo, anche se ho abilitato il monitoraggio e controllo. Ho provato a scaricare le verioni piu vecchie ma niente da fare...
Scusa come non detto, ho appena scoperto che e ra perche era messo sulla scheda video del processore... ora ho messo sulla scheda video dedicata ed e tronato come prima. Bel video ;)
Mi fa piacere che tu abbia risolto! Stavo per risponderti che sarebbe dovuto essere per forza legato ad Optimus ed al meccanismo di switch delle GPU ahaha
Hey. I have a dell g15 i5 12500h with rtx 3050 8 gb of ram. When i play games with charger pluged in i get around 350-400 fps but as soon as i remove charger and try to play on battery i get like 10-15 fps. Pls help 😖🥲
It means that it’s switching your GPU to the iGPU or tuning on a power saving setting. Check that, but generally laptops are not meant to be played on battery
Will this increase the graphics a bit as well other than the fps? Id like to get a bit more preformance out of my graphics card, i have a victus 15 ryzen 7 gtx 3050ti with 32gb ram and 1tb ssd
Didn't work for me. Have tried 775mV with 1700MHz, 600 with 1800, 825 with 1800 too and the benchamark software just stopped suddenly, when i reset the setting, it backs to normal. Any suggestion? My laptop is victus 15 fa0008tx with i7 and rtx 3050.
One wuestion man. If i set power limit in msi afterburner and i change it from 100% to 90% i try it and its like undervolt temp go down sow whats its the difference? Maybe its better just set power limit -5% or 10%!??? Or... O try too temp power limit if i set it to 75c° or 78° i have same effect i drop temperature and i happy. What you think it same??? Of what you doing or no? What its the diference??
I’m not sure why or how but I have an MSI gaming laptop with a 3050. When I do this it will just stay in the range of high 1200 to mid 1300…I’m not sure what’s happening however it will periodically hit 1500’s anything more it’s for a few seconds. My temps stay at 60-66 top. Do you think it’s the MSI center contradicting the afterburner, should I double check bios or maybe Nvdia…I’m not I’ll end up doing all of this but maybe you’ve encountered this, it doesn’t seem to be able to hit those 1500+ mhz consistently
I have newer victus 16 with 4060. And it seems my idle gpu when running benchmark was 2475mhz, and when I set 850 voltage to around 2480mhz, it crashes. so I retested on 875voltage, it kinda works this time but the voltage usage on HWmonitor seems to be similiar and I'm getting no performance enchancement now. any advice?
My laptop has a RTX 3050TI but temperature is always at 60c without having any software or game open, I've tried changing the thermal paste and cleaning up the dust, any idea of what could be happening?
@@pieathart That's good to know, but I figured out that I've had installed Nvidia Broadcast which was keeping my GPU active the whole time until I close it and remove it from windows startup.
Is there a way to stop thermal throttling in this laptop ? I have the same HP Victus 16 Intel version. As soon as it reaches 82 - 86°C it starts thermal throttling and that's even annoying 😢.
im using nitro 5 with spec in i5-10gen ,rtx3060,my normal temperature if play AAA game or high setting i got max 93-94,here i thought 90 c is normal for laptop gaming😅😅
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
only 6 minutes of my time for -10°C on my laptop. thank you very much, man!
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
@@ImWateringPSUsciao scusa ma una domandina.
Ma se invece io su msi afterburner vado su power limit e metto da 100% a 90% ottengo praricamente lo stesso risultato la temperatura va giù di brutto. Non e la stessa cosa in pratica che fai te ?? Perche tu limiti solamente in un altro modo o sbaglio??
Ps..
Oppure ho pensato e se invece solamente in una altra maniera si puo invece usare opzione temp limit.
Se notebook scalda troppo basta mettere power limit a 75c° gradi o quello che vuoi e se a posto lui fa tutto automaticamente!
O sbaglio??
Thank you so much!! Now my victus 15 with 3050 gains around 5-10 fps more and lower the temps around 10°c
@@zj29merka70 800mV and 1800MHz (same as video) and put mem clock to 500, i think the result depends on your laptop and luck.
Maybe the performance won't be the exact same but it won't affect my card iin a bad way right? Should i try it, and if anything happens bad, I'll reset??@@nyxreverse2644
With 12th gen intel i5 12500H ?
@@envagyokaz04 mine with Ryzen 5 5600H
Should i try ?what you think ? My cpu us 95 always when i play any games.its not lagg or anything bad...but very hot ...thx for fast answer
Your pronunciation is so understandable for a Russian person to understand, I am shocked at how clearly I understand everything. Thanks for the guide.
Ahahaha I’m glad that’s the case, I’m italian! I’m very happy the guide was helpful, I wish you a very good day😇
@@ImWateringPSUs Russian and Italian are similar hearing wise
ты смог все сделать? помоги по возможности и мне)
@@ImWateringPSUsci avrei giurato
@@ImWateringPSUs ah si bella li ciao vechio😊😊🤗
This is litterally the best undervolting video ive seen for my pc. Thank you.
You’re really kind, thanks a lot for your support! :)
Is it make fps lose or not ?
yes it might reduce your fps but it reduces your temperatures A LOT. @@Axherion
@@Watermeloncateditz69 I changed laptop 😂 I got now 4090
but he said you will get more fps ?
@@Watermeloncateditz69
Around 800- 1750 was sweet spot on Lenovo Ideapad Gaming 3 dropped to 67- 68 from 80 degrees. Thank you:) Also your pronounciation is one of the most understable one heard before. Thanks again.
Bro, your video's of undervolting the 2060 and 3050 helped me a lot, i undervolted both my pc rtx 2060 and my laptop 3050 and i gained some fps and low temps, so over all your videos in the tech tips zone are 100% pure gold bro, keep up the good work.
On my 3050 Ti / ryzen 5600 Lenovo gaming 3 power limit was enables at 83W (stock) at the benshmark. After undervolting i have 53W and be under limits. More silenence, and more power for CPU. SETUP: CC -300MHz, 850mV / 1900MHz. THANK YOU!
Thanks man, im on an rtx 3050ti and was able to get as low as 0.845mv, my temps dropped like 10°c when gaming, unigine benchmark scores did improve slightly and I noticed the temps were stable and not fluctuating like before which indicates there's less thermal throttling.
One other thing I would advise others is after you've observed that the GPU is stable, before you save the settings in MSI afterburner use those settings and play any demanding game for like an hour, sometimes you might go 30-40 minutes before experiencing a crash, in which case increase the voltage by 10-15mv and try again.
If after 1 hour of playing a demanding game you have no crashes then the undervolt is perfectly stable.
Another thing you can also do to control your gpu temps is by limiting your fps, for example if a game is getting 90-100 fps, the temps will drop if you limit the fps to 80
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel! Great advice you gave btw :)
I have the same card , can you share your profile ? :]
true, I limiting FPS to 65 in nvidia control panel when I play on 4k/60Hz monitor.
I have 2000 mhz in 912mv working stable. Nice guide!
I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)
temp?
used your recommended settings and dropped from 80c to 68 on heavens benchmark, Thank you brother
Thank you so much! I'm now able to get stable framerates on most games on my Legion.
Thx mate you are a saviour its 40c outside here in india when i play elder ring my gpu was touching 85-87c right now it, 73-75c i am using 825 with 1800mhz👍
what are your specs bro, fellow Indian here
gotta say the channel name is amazing
Ahahah thanks a lot my man! And it’s not just a name, if you wanna watch some more videos :)
Wow so easy guide and it works perfectly on my 4070 msi laptop thank you very much 😍😍😍.
I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)
Wow this such a good tutorial, great job man
I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)
@@ImWateringPSUsWell ı have a question can we overclock it?
@SomeOne-of7nd Now u asking the right question
@@mr.G4MES1 well i changed my laptop not needed anymore
@@SomeOne-of7nd to 40 series?
thanks man saved my laptop from crashing every often thanks bro
This also worked on my HP Omen laptop with Intel Core i7 10750H and RTX 2070 Super Max Q , you dersved a like from me Thank you
I recently got a second hand tuf laptop with a Ryzen 4800h and 3050, I managed to get 1820 at 825 and definitely a good 7-10 degrees cooler, the turbo setting from Asus software allows the card to to 1950 but any sort of undervolt at that power crashes games instantly.
Great results there! 1950 is definitely too high for a laptop, it’s probably sustained for just a handful of seconds. Some desktop cards don’t even go that high😂 Great job with the UV!
@@ImWateringPSUsmy 3050ti in my rug f15 in turbo mode boosts to 2050 lol
Actually it goes beyond 2000 I have question so you running game in turbo mode or performance because I have same laptop
i did same settings as urs , i have to keep the laptop in turbo settings only right??
I did 825 to 1800 and I started getting 85C just on roblox please help@@ImWateringPSUs
Thank you for this video! I didn't realize how beneficial undervolting was until this video. I am now able to get the same performance at much lower TGP, or same TGP, and much more stable performance!
Sadly, Laptop CPU's are locked from undervolting, wish I could do that as well.
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel! if you have a Ryzen laptop, I actually do have an undervolting tutorial!
@@ImWateringPSUs Could you please link me to it. All I can find for CPU undervolt are desktop versions
@@sreeravi25if you have ryzen cpu download ryzen controller and reduce your cpu wattage to 29 and 30 that will reduce your cpu temps by a massive margin
disable turbo boost if amd and set max processor state to 99% if intel
@@z01k1 I disabled turbo boost, works flawlessly
thank you so much i went from 92-94 fps on heaven benchmark and 70 Celsius to 120-ish and 56 celsius
Bro lower my temp from 95 to 75. Thanks spending 6 minutes was worth it
Before this guide, my 3050 was working at 87 degrees and it was making a lot of noise, now I am using a stable 800 mv and 1950 at 75 degrees.
Can you help me? I have same GPU.
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!
You mean 800mV and 1850? 1950 Mhz it's real too much
@@ra1l66try 800 volt ,1815 mhz
Wait bro fixed my laptop I was running 60-70fps max on rust and now this sh on 170fps in game and stays cool bro wtf I luv u bro ong😭😭🙏
Hey bro, I did as you said, but it didn’t work out, I had 1500 Gru, it remains like this, what should I do? Fps has not changed.. help bro
Hey bro, I have a problem, I set it to 6700mmz и у меня не роботает интерфес... И ничего не запускается из програм и у меня 400 gru
I open any application and my interface freezes... It would be great if you could help me. After I click on the application, the laptop starts making noise and freezes. It turns on normally via the button.Асер Nitro 5
Set it to 150Mhz less and you’ll be fine! And subscribe to the channel :)
I have an Asus Tuf A15 with an RTX 3050 and Ryzen 5 4600H, every spot that I try to do gets stuttered and then freezes. Any help thanks . Ive tried to do 775 with 1800, 800 with 1800 and 825 with 1800 so far
i have seen various vids and tried different profiles but this is the best one ...the first profile rovides the best temps almost a drop of 10 degrees
A little shortly deep beep sound after opening Baldurs gate 3 again and playing with the configs in game, any relation?
Great video. I have a Dell G15 with Ryzen 5 5600H and a RTX 3050 (4GB RAM and 80W). I set the UV to 825mv and 1800 Mhz and tested the temps and wattage in FF VII Remake locked at 90FPS and got this results: without the UV 85ºC and 78W - with the UV 71ºC and 48W, a fantastic result, thanks for that. Keep up the good work.
Edit: Now I tested the same game but locked at 60FPS and got 62ºC and 40W with the UV.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Why did you not go for 800mV? Can I use 800mV?
@@ImWateringPSUs Can I use 800 mV for the same specs laptop mentioned above? will it cause trouble? Or I just hit and try with 800mV/825mV?
Update: while playing overwatch, the game froze. The game hasn't frozen ever in my life except just now.
Settings were 825mV at 1800mhz with -300.
@@sahilk.shinoda I tried 800mV but the card started to give me trouble, for me 825mV just made the trick.
@@sahilk.shinoda Unstable overclock you need to go higher mv try 825 and work your way up if it keeps crashing or lower the mhz at 800. This is a normal part of testing an undervolt for stability. Your laptop is fine. It's not getting hurt; for testing, I don't recommend enabling the start with Windows function until you ensure it's 100% stable across a few games.
Hey!!
wanted to tell you that this helped me but when i did the first method after that when i launched the game the usage and temp of GPU from the MSI Monitoring disappeared but the game worked fine no FPS drops everything was good, then i did that 825 and 1800 method that worked too, when i played the game after some hours (i shutdown my laptop) on the monitoring the usage and temp appeared automatically and after playing for 30-40 mins the fps dropped and game started lagging
then i went back to the curve and took it to 775 and 1700 after that no stutters were seen
any idea why that happened and why GPU usage and temp were lost when i first did the tutorial?
Keep growing brother 💝
Bro the temperature were under 85 degree on day one but it’s keep going to 95 toady and i tried reset it again but not working please help
Thank you, I'll try this when i get home. That said, i have one doubt, is there any benifit to change that "memory clock" numbers?
My GPU wattage is limited at 75W but it's not using more than 20W in games. What can I do to increase my GPU wattage in games?
if you have an Nvidia gpu then right click on your windows screen and select Nvidia control panel and go to manage 3D settings, search for power management mode and select "prefer maximum performance". if it is still not using maximum wattage then your PC/laptop is experiencing thermal throttling and most likely needs a thermal paste re-paste.
@@skittledoge6049 No, it was just a driver issue. I installed an older graphic driver and now my GPU works properly. I noticed that some drivers are not fully compatible with my RTX 3050Ti GPU. So I decided not to upgrade my graphic driver again.
@@FIFA07Prowhich version? im also experiencing the same problem
@@zenos1854 I installed the nvidia graphic driver from 9 may 2024. I installed it right from the nvidia page.
wow thanks man..just finished cleaning n repasting my acer nitro 5 and now thats ram is cheapr i decide to upgrade to 32gb ram...then decide to play plaque tale requeim..this game use 12-15gb of my ram..to my surprise,playing in 4k dlss performance mix ultre mid high low. i can locked my fps to 50..graphic look super amazing..im using rtx 3080 100watts locked at 1800gpu clock 825 voltage..my temp only 61-63..my cpu is ryzen 9 5900hx and the temp around 71-74c.. i'm super satisfied with the performance n temp..
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!
I CHANGED ALL THE SETTINGS AS U DID AND I ALSO HAVE A RTX 3050 BUT STILL ON THE MAIN PAGE OF AFTERBURNER THERE IS NO SIGN OF CHANGE CPU CORE REMAINS 1500MHZ ONLY WHY?
Hello! Mine is still stuck at 1500MHz, and I notice that the curve only flattens briefly after I hit apply. Some parts still curve up. :(
I have same laptop with rx6500m but Masi Afterburner doesn't show anything like clock speed, memory speed, curve graph. When I switch to igpu then it then everything show but I need to undervolt dgpu. So help
Thank you! Temperature is now normal, but I have a question. Sometimes, even rarely, only a single game "New World" can suddenly stop responding together with some programms, so I cannot even restart my laptop without holding power button. In all other games everything is perfect. Should I change something or isn't it bad for my laptop, when it freezes like that?
I’d say lower the core clock my 50Mhz aaaand subscribe to support the page😂💪
Thank you it works , on my rtx 3050 lenovo laptop only 825 and 850 shows no artifacts like on on 800 it was some purple artifacts
thank you brother. it helped me as well
I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)
for some reason my gpu says 210 and my mem says 374 in the MSI tihng but when i use the benchmark thing it says 2250 gpu mhz h
Hmm, not sure what i did wrong in this, temp wasn't lowering. At 800v 1700 mhz my GPU slowly increasing it's temp from 65 to 86% in just 3 or 4 mins. Like what's the point in undervolting if my GPU temp isn't going down yet im using way less power. Same specs as you had I5 - 11400H RTX 3050
you'll see the temperature diffrence in games i had the same issue but in elden ring with stock settings my gpu was at 80c but at 775mV and 1700mhz it dropped down to 68c with minimal fps loss!
Can you please make a video on overclocking a 1660ti laptop or this 3050 to get the most performance with no care for temps? I have a huge fan underneath my laptop so it never gets over 60 celcius anything I throw at it. So I was wondering what maximus juice I could get of performance out of it.
Unfortunately with laptops, performance is very tied with temperature, so you don't get the best performance if you let them run at a temp that's too high. I'll definitely make a video for the people with a big thermal headroom tho!
@@ImWateringPSUs Appreciate it!
nice video! but after applying these settings, i dont see any significant drops or changes in my cpu temp, tried throttle stop too but nothing seems to work.
The settings don't apply on my victus 15, the clock of the gpu remains the same, additionally msi afterburner doesn't show the stats of the gpu.
The frequence seems to be locked permanently at 1500 mhz whitout giving a sign of life
Have you started Heaven benchmark? Also be sure you don't have other software interfering
can you tell me what i should use for my laptop it has a rtx 2050 , laptop is called Acer Apire 5 i would really appriciate your help
Same settings!
my rtx 3050 mobile goes up to 1980mhz. which voltage point should i use ( i have 85 watt version)
2:50 If the game crashes on 875 milivolt. Can i increase it upto 950 975 milivolt? Will it cause any internal damage to the system?
Hi, can you did this? Does it work normal with 950 mv?
i'm good with the first one, all laptop's gamers are scared of getting a serious problems with their devices cuz of the maintenance costs a lot of money
my 3050 laptop only goes up to 1500 MHz, do i change the curve to 1500 or 1800? when i change to 1800 it only max at 1500
Thanks, just what I was searhing for.
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!
Well done man!
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!
Hello, I noticed you didn't touch the memory clock speed. Is it necessary to overclock the memory as well?
i have laptop with amd ryzen 7 5800H with 3050 and my base CPU clock is 1057 MHz, is there any setting that could get mine to 1672 Mhz like yours? or something is wrong with my software?
Yes, just copy the settings in the video with heaven benchmark open and subscribe to the channel
I did ur settings and i got flickering while in game i have dell g15 rtx 3050
Why doesn't the GPU2 voltage option appear in the Afterburner monitoring section (in this case my RTX 3050 Ti)? I can't see the voltage data while playing or performing any tests. Also on the main screen of Afterburner, the left voltage option is blocked, to modify the voltage I must go directly to the curves box and modify frequencies and voltage.
Can someone tell me why the voltage option does not appear in monitoring?
I have the same problem
after I did all the steps and rebooted the laptop, it started hanging and the msi does not open, and then it gives a blue screen, what should I do?
Correct! :)
Please help me. I've undervolted my laptop to 825mV and clocks to 1800mHz, but whenever I play Palworld or anything the clock drops to 1200mHz or lower. Temperatures rise to the throttle limit and I can't do anything about it. My laptop brand is Asus and the GPU is 3080TI Mobile.
You need to do a repaste and repad🥲 I have videos about it on the channel
Even when my device is new? I think it is not hitting thermal throttling so I can stay at that a month or 2 and then repaste it@@ImWateringPSUs
Does GPU TDP matter when you have to set the minimum voltage? And what is your laptops' GPU TDP? I have Target 60w and maximum 75w gout TDP. So what settings are best.
Nope, it doesn’t matter!
@@ImWateringPSUs my udb is showing as UEFI and that the only usb. And when I click on it, its boot the window and take me to the normal window home page instead of the flashing bios step.
Hi there! Came back after 7 months to say that you have the best and the most helpful channel ive ever seen, After your tutorial my laptop runs everything veryy smoothly, God bless you sir! Oh yes and one more thing, i have the same laptop as yours, the victus 16 with a 3050, which preset do you use for gaming? Just wondering :)
this was VERY helpful! very well explained. and i have a victus 15 laptop with a 2050 im trying to get the most out of it. is undervolting better than overclocking? im looking for better performance while streaming gaming and running mods for games. running the HP VICTUS 2023 model with the RTX 2050 Ryzen 7000 series CPU and 24GB of DDR5 4800mHz Ram. thanks in advance for any advice!
Yes, it’s better overall because it won’t reach thermal throttling!
can i copy your rtx 2050 setting
850 works best for Asus Tuf F15 RTX 3050 FX506HC (Looks like this is the efficiency mode since having lower than 850 it crashes, and when I game with 850 it is extremely quiet while maintaining stable 60fps at highest settings GTA 5 1080p). This is nice for school when I cant fit my cooler into my backpack for gaming while being quiet as my PS5
many mhz?
@@elverhaha 1695mhz-1700mhz, getting around 65-70fps GTA 5 w/highest settings (Keep in note I have only 8GB of ram) while maintaining under 60 watts (56-58 watts average) from 70-75 watts average.
Oh yeah actually I just found out/forgot that my or that specific laptop mentioned has a performance mode which automatically undervolts it, previously I was using turbo mode which utilizes 100% of the resources (instead of limiting the MHz/clockspeed of my GPU, the performance mode I believe this dynamically adjust the clockspeed based on temps probably it tries to keep it under 85 degrees which results in my laptop being quiter, it hovers around 1500-1800MHz while not limiting the GPU wattage).
Also for the turbo mode/unrestricted mode, the clockspeed hovers around 1900-2000+MHz. It seems that it suffers a major throttling though? The FPS drastically drops compared to undervolted or performance mode, maybe this is really how a GPU works but not sure, but I’m just going to mention that.
@@elverhaha 1695-1700MHz, try performance mode since I think it limits the temperature instead of limiting the clockspeed
@@elverhaha 1700
@@Not_Aran8276many temperature
most of the time it is stable followed everything you did but sometimes it crashes while playing and you have to restart the laptop but the guide is dope gpu temps were 86 now they dont go above 75
Everytime I turn the curve back up it reverses the voltage and cranks it up, why? I click it apply the app crashes.
I think you might have another software interfering
@@ImWateringPSUs it's a brand new 5600h RTX 3050 Lenovo I haven't installed anything aside from steam and windows updates 🤔
Strange.
I have the victus 15 rtx 4050, Im a little confused because my numbers on the curve are higher so I dont know what number to go when you mention to go up to "1700"?
a bit late but since you have a more powerful card your max frequency will obviously be higher, look up what your max frequency is based on your wattage and card and set it to that instead of 1700 with the same voltage values
@@freezingicy9457 best undervolt for i7-12700h and rtx 3050ti 95w? I try 850mv with 1850mhz and stable, best values?
I have i5 1400H. Rtx 3050 i try curve 800 and 825 still crashing
Thanks for the video mate. I already had some experience in undervolting my pc graphics, when I had to manually find the lowest working voltage so it doesn't crash. It did drop around 10C and some noise, but I did that then because the card is hot and running at 90C+ looked bad. Was it even an issue though on victus? I just got a victus 15 with rtx 3050 ti and didn't play anything yet, just did some tests and benchmarks. Highest temp was the cpu hitting 97C and since the heat goes from it via the tubes past the gpu it keeps gpu "warm", lmao. I still didn't see anything above 80C on gpu. Guess I'll try to undervolt just to check if it changes anything on laptop.
I can relate bro. ~ victus 16 d0023dx user
Well, just to update my experience. I turned off turbo boost and that dropped max cpu temps to 64C. Problem is at least my victus had win11 by default and that did not accept any settings in power management. Only started working on win10 but I barely found all the drivers since they are not available on hp website or anywhere. Win11 lets you fry your cpu up till 100C and win10 starts throttling at 95C (which makes me hate win11 even more now). As for gpu undervolting my patience ran out. MSI afterburner loads 1st cpu core always to 100%, not sure if anyone saw this too. Only on this laptop tho, pc works properly with afterburner in background. No point in undervolting what only heats up to 75ish but load the cpu in idle
Well, got my rtx 3050 ti to 1805MHz at 0.806V. 1820Mhz at 0.800 failed after some time so I gave it a bit of breathing room, seems stable. Iirc in stock it had 82C now 72C and maybe a bit less noise but just a bit (if loaded with heavy load fans are close to 90%). Guess it's worth it anyway. Read so many different comments about how the cpu/gpu in victus 15 are locked from undervolting but nah, all worked besides the cpu load from msi monitoring every 3sec
I mean, it depends on what you want to achieve. I went for lower frequency and voltage to get lower temps with acceptable performance. You can try playing with the frequency value on the curve to find a working value since the values can differ even on the same model. The worst you can get is a screen freeze, just click revert icon fast enough
@@zj29merka70 it depends. You cant jump above the maximum values. At best you can find a frequency/voltage ratio that works on same frequency but lower voltage. For increasing performance you'd want overclocking, but doing that on a laptop? I wouldn't do that.
I clicked Windows icon to Apply UV settings when Windows started but MSI Afterburner resetting to default settings after restarting my laptop. Reinstalled Nvidia driver and MSI afterburner and ım still getting the same issue.
I think another software is interfering
@@ImWateringPSUs Yeah. I found out Acer Nitro sense overriding MSI Afterburner settings.
its,work! so I should open msi every time when I want to use this setting right?
Bro...how to i change my power limit...it is greyed out just like yours
You don’t have to change it, just follow the tutorial and subscribe to the channel
well it works when i set it to 825 at 1800 , your first and second settings doesn't work much for me since its crashes my game when i try to run it
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
Hello, I have this. I have the Power Limit and Temp Limit sliders blocked, although the video card is exactly the same as yours, and I did everything like you.
You can still do the rest of the steps and it will work!
Hi bro i just bought a 15.6 hp victus with an amd ryzen 5 5600H and rtx 3050
I have a problem concerning the NVIDIA control panel, it doesnt show the display setting, I wanted to change my refresh rate from 60Hz to 144Hz but cant seem to do so, can you help me ?
thanks
Did you download your 3050 drivers from nvidia experience ?
@@dqic yes I did
Mine wont save every time i save it ot apply it returns to deafult? How do i fix this
3050ti 95w , 850 mv and 1900 mhz is crash instantly but 825 and 1800 mhz works any idea ?
I have the same model, any solution?
Hello, i was wondering why didn't you touch on vram overclock? I gained an extra 4-5 fps by just raising memory clock by 500Mhz at 900mv and 1995Mhz core
I cant undervolt because when i start any game my gpu goes to 88c and my mhz gets from 1400 to 1000 and lower, what can i do?
You need to repaste your laptop. I have videos about it on the channel
I don't see any changes in my msi afterburner in GPU clock speed even following whole tutorial step by step, it's still stuck at 1500Mhz for my rtx 3050, please help 🙏
Same here
can you please tell the preset for gpu/cpu undervolting for the best battery life? (with performance taking low to medium hit)
Take the one from the video but with 50mV less and 150Mhz less!
I have also Hp victus, but it seems HP can't change power and temp limit on Msi afterburner.
Sometimes you need to do it via the HP software
@@ImWateringPSUs Ok, which settings is best for my laptop, also is it worth to buy cooling pad?
why my msi after burner no running while i open the app? any idea there is no changes on msi burner app how to solve? i have the same laptop
Try to reinstall it
Ciao, mesi fa ho fatto come nel video e mi aveva aiutato tantissimo le temperature erano 15 gradi in meno, il problema è che oggi ho dovuto formattare il laptop ( sempre un Hp Victus 16 con rtx 3050) e scaricando la app di msi afterburner non mi esce piu il grafico come era prima, mi escono due grafici, in piu quando sposto la barra core clock o memory clock mi ritorna automaticamente al punto di prima in mezzo secondo, anche se ho abilitato il monitoraggio e controllo. Ho provato a scaricare le verioni piu vecchie ma niente da fare...
Scusa come non detto, ho appena scoperto che e ra perche era messo sulla scheda video del processore... ora ho messo sulla scheda video dedicata ed e tronato come prima. Bel video ;)
Mi fa piacere che tu abbia risolto! Stavo per risponderti che sarebbe dovuto essere per forza legato ad Optimus ed al meccanismo di switch delle GPU ahaha
Hey.
I have a dell g15 i5 12500h with rtx 3050 8 gb of ram.
When i play games with charger pluged in i get around 350-400 fps but as soon as i remove charger and try to play on battery i get like 10-15 fps.
Pls help 😖🥲
It means that it’s switching your GPU to the iGPU or tuning on a power saving setting. Check that, but generally laptops are not meant to be played on battery
@@ImWateringPSUs how to check the igpu setting please?
Will this increase the graphics a bit as well other than the fps? Id like to get a bit more preformance out of my graphics card, i have a victus 15 ryzen 7 gtx 3050ti with 32gb ram and 1tb ssd
It will increase GPU performance in general, but only if you subscribe to the channel
@ImWateringPSUs subscribed! Haha cheers, how about over clocking the gpu?
will it increase fps and simultaneously will reduce temp ?? can u please explain how as I don't know how this works.
Hey, so I have i5 11400h and rtx 3050, but for some reason MSI afterburner won't let me use the curve editor, it's gray. Any help?
I’d say make sure you’re selecting the proper GPU inside afterburner
How and why do you do a -300 on that clock speed at the start?
Didn't work for me. Have tried 775mV with 1700MHz, 600 with 1800, 825 with 1800 too and the benchamark software just stopped suddenly, when i reset the setting, it backs to normal. Any suggestion? My laptop is victus 15 fa0008tx with i7 and rtx 3050.
Try 825mV with 1700Mhz, it means your card is a bit unlucky but we can still make it work!
@@ImWateringPSUs I got a random crash at some points in games applying those settings, eventhough the benchmark runs fine. Any suggestions?
@@faizulurrasyadi1893 850mv
fisrt try 1.0v with 1800mhz , then start down the voltage a bit like 0.025mv peer run , until crash , crash is you stable voltage with 1800mhz
bro i crash my laptop and the curve cannot be reset , the curve stuck , can u help me?
Hello, i have the same gpu (3050 laptop) but i have the issue where i was already undervolting but my gpu temp hasn't lower yet.
You might need to change your thermal paste and pads
Where's your video for 3050 paired with Ryzen 5?
One wuestion man.
If i set power limit in msi afterburner and i change it from 100% to 90% i try it and its like undervolt temp go down sow whats its the difference? Maybe its better just set power limit -5% or 10%!???
Or...
O try too temp power limit if i set it to 75c° or 78° i have same effect i drop temperature and i happy.
What you think it same??? Of what you doing or no? What its the diference??
I’m not sure why or how but I have an MSI gaming laptop with a 3050. When I do this it will just stay in the range of high 1200 to mid 1300…I’m not sure what’s happening however it will periodically hit 1500’s anything more it’s for a few seconds. My temps stay at 60-66 top. Do you think it’s the MSI center contradicting the afterburner, should I double check bios or maybe Nvdia…I’m not I’ll end up doing all of this but maybe you’ve encountered this, it doesn’t seem to be able to hit those 1500+ mhz consistently
You need to have heaven benchmark running aaand yes I'd disable MSI centerr
Does afterburner need to run in background to consistently apply the settings?
I have newer victus 16 with 4060. And it seems my idle gpu when running benchmark was 2475mhz, and when I set 850 voltage to around 2480mhz, it crashes. so I retested on 875voltage, it kinda works this time but the voltage usage on HWmonitor seems to be similiar and I'm getting no performance enchancement now. any advice?
First you need to find the highest clock it’s running at in-game after 30 minutes. That’s the clock you wanna aim to surpass😇
My laptop has a RTX 3050TI but temperature is always at 60c without having any software or game open, I've tried changing the thermal paste and cleaning up the dust, any idea of what could be happening?
60C is not too high on a laptop tbh, I wouldn't worry!
Anything below 90C is good for a laptop and at 90+ your laptop will throttle and save itself from burning itself
@@pieathart That's good to know, but I figured out that I've had installed Nvidia Broadcast which was keeping my GPU active the whole time until I close it and remove it from windows startup.
Game crash at gpu underclock?
Hey amigo, podrias hacer un video de undervolt de la rtx 4070 de laptop?(predator helios neo 14)
Is there a way to stop thermal throttling in this laptop ? I have the same HP Victus 16 Intel version. As soon as it reaches 82 - 86°C it starts thermal throttling and that's even annoying 😢.
Well this is what the video is about! If that's not enough, you do need to replace the thermal paste!
@@ImWateringPSUs no actually my GPU stays below 80°C but my CPU temp skyrockets to 86°C and starts thermal throttling on CPU intensive games.
im using nitro 5 with spec in i5-10gen ,rtx3060,my normal temperature if play AAA game or high setting i got max 93-94,here i thought 90 c is normal for laptop gaming😅😅
@@zan_chox LOL it's a step before death. Atleast yours wasn't throttling. Mine starts throttling at 85°C.
@@saintsfrowits base on the model of the laptop bro, me it go over 100°c and still be able to work ok :v
bro my gpu is has been stuck at like 200 mhz wtf i have 3050ti ryzen 5 5600h HELP