Thanks mate. Useful. Used to be in heavy overclocking back in the years (17th in enthusiast league on HWbot back in 2018...). Went mobile since. And your tutorial is golden.
That’s a good idea, I thought about it but I don’t wanna waste time! It would actually benefit me to increase the watch time but I want to save time to the viewer. But I can definitely add it!
Ahahahahah I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
@@Beho1derэто температура hotspot или gpu memory? Я наоборот сделал андервольт на 0.810 v с частотой 2350 mhz , теперь у меня температура gpu 65 ° , hotspot 70° , gpu memory 75°
@@НаучныйШортс After around 2 hours of gameplay, the hotspot average temp is 66.4*C and avg memory junction temp is 74.7*C. GPU temperature is 55*C on average. I have also applied PTM 7950 on the GPU and it helps quite a lot. Room temp is at 25*C.
Nice tutorial dude, can u make a gaming comparison since i want to buy a rtx 4060 laptop next month and i want to know how's the difference, thanks have a great day.
Glad I could help! Consider subscribing to the channel to support me :) This laptop is VERY good so I can recommend it, the full review is on the channel
I'm not sure if this is the best way to use the graph to undervolt, I mean in lower frequencies it is higher, there is a way to make it basically the same if you lower the first curve and then raise the leftmost point.
Got a Gigabye G6 KF with this card, now the benchmark gives 30 more FPS at 68 degrees core temp, can run dual screens at 40 FPS too, clock is at 1200. Thanks ! Wish I could undervolt the CPU as well, but the BIOS is locked :( it's like gaming with a leaf blower :(
@@SildurFX didn't overclock anything, just followed instructions for undervolting. Can't do it on the processor though, BIOS is locked. Don't buy this laptop unless you want to invest in a powerful cooling rack and play only with headphones. This thing is too loud for comfort and without a cooling rack the processor will get damaged a minute after the warranty expires
That’s good! I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Wait, memory frequency or clock frequency? That is a lot for clock frequency but not that much for memory frequency. I think you are adding numbers to the wrong box. Careful. You really can't go over 300 for clock frequency!
Hi, my 4060 laptop seems to have a gpu limiter at 2250 mhz, there is a line at 2250 mhz and no matter if I increase it to 2500 mhz in the console it still shows 2250.... Is there any way to remove it?
@@ImWateringPSUs I actually have another update. I flashed my bios to have the 105w version, and undervolted it to 75w with overclocking. together with the iets gt500 my laptop now performs like every other 4060 laptop :)
@@Xspy70 sorry but there is no "ti" in rtx4060 for laptops it only exist in desktops I have checked the driver page of nvidia too so bad luck there is no such thing as "RTX 4060ti mobile" alright
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Amazing video. Much love my brother
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
You can also do 2550mhz @900mV easily on a 4060 laptop. I myself using it from months now
Agreed! Thanks a LOT for the feedback
You won the silicon lottery, not everyone will be as lucky. Most people will only achieve 2400 to 2500. good for you.
Did not go well for me but i've tried and get for now 2565mhz @925mV
Same here
Mine unfortunately crashes at anything above 2500. Cherish your GPU XD
I went with 875mv at 2400mhz tops on my RTX 4050 (Gigabyte G5 MF) and its super stable/cool. Thanks for the guide
i have the same laptop but with 4060. Our GPUs are 60W. What clock speeds do u have in games? Do u monitor CPU usage as well?
Thanks mate. Useful. Used to be in heavy overclocking back in the years (17th in enthusiast league on HWbot back in 2018...).
Went mobile since. And your tutorial is golden.
tysm! it fix my stuttering issues with games.
plz next time add a short compare video about after settings,will be very useful😮
That’s a good idea, I thought about it but I don’t wanna waste time! It would actually benefit me to increase the watch time but I want to save time to the viewer. But I can definitely add it!
my brother you have done it for me thanks so much for your help 🙏🏽
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
God bless you man. From now for you is reserved seperate place in heaven !!
Ahahahahah I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
Thank you! Short and sweet, you got my like
Give this man some respect bro He is actualy a hero tysm
Herotystic?
Heaven Benchmark isn't the best way to test your GPU OC
3Dmark/superposition for core and memtest_vulkan for memory are better options
Also, keep in mind NVIDIA GPU Boost that will add +15MHz before you reach certain temperature
How were you able to get voltage control unlocked in msi afterburner? Mine is grayed out. Msi laptop 4060rtx
You need to go into the settings, or press CTRL+F but it only works if you subscribe to the channel :)
Applied to my RTX 4050 just now since it boosts to 2600 MHz as well, great tutorial !
Did it help ? im thinkin to do it on mine now .. since it goes to 82W while gaming and 80-85C and i dont like that at all
@@deadlyaim465 Yeah it did help, GPU temps and wattage are now under control and don't hit more than 80C in any scenario.
@@Beho1derэто температура hotspot или gpu memory? Я наоборот сделал андервольт на 0.810 v с частотой 2350 mhz , теперь у меня температура gpu 65 ° , hotspot 70° , gpu memory 75°
@@НаучныйШортс After around 2 hours of gameplay, the hotspot average temp is 66.4*C and avg memory junction temp is 74.7*C. GPU temperature is 55*C on average. I have also applied PTM 7950 on the GPU and it helps quite a lot. Room temp is at 25*C.
Someone should really test legions also under these circumstances and ensure it doesnt fail also
It works fine
It all depends on your silicon lottery
Nice tutorial dude, can u make a gaming comparison since i want to buy a rtx 4060 laptop next month and i want to know how's the difference, thanks have a great day.
Glad I could help! Consider subscribing to the channel to support me :) This laptop is VERY good so I can recommend it, the full review is on the channel
i got about 70 degree heat
I got my 75w 4060 to take 750mv at 2200mhz. can push it higher but i have a gigabyte g5 so that gives me good performance without too much heat
I have the same model , it set it to 850 mv , core clock at 2340 mhz, memory clock at +800 .Try that out it's the best setting I found
And also buy a 230 watt adapter for your laptop like i did , it will reduce your cpu temps as 150 watt adapter causes heating issue
Vedo dal tuo pc che sei italiano. Complimenti! 🎉🎉
Confermo, confermo ahahaha! Grazie🤗
I'm not sure if this is the best way to use the graph to undervolt, I mean in lower frequencies it is higher, there is a way to make it basically the same if you lower the first curve and then raise the leftmost point.
I will try it today afternoon when i got home from work. I have a lenovo legion . Wish me luck
What if your gpu is only 2250mhz where do you set the curve to?
Got a Gigabye G6 KF with this card, now the benchmark gives 30 more FPS at 68 degrees core temp, can run dual screens at 40 FPS too, clock is at 1200. Thanks ! Wish I could undervolt the CPU as well, but the BIOS is locked :( it's like gaming with a leaf blower :(
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
@@ImWateringPSUs done, subscribed. I speak Italian a bit, quindi grazie e buona fortuna con il tuo canale ! 😃
what was your curve, i had artifacts around 2500mhz
G6 KF has a 75w GPU limit, so how high did you manage to push your core clock?
@@SildurFX didn't overclock anything, just followed instructions for undervolting. Can't do it on the processor though, BIOS is locked. Don't buy this laptop unless you want to invest in a powerful cooling rack and play only with headphones. This thing is too loud for comfort and without a cooling rack the processor will get damaged a minute after the warranty expires
Set to balance or performance? Thanks
hello, thx for undervolt , is it safely to boost memory clock? Will the memory banks overheat?
how do i hit apply. mind boggeling
Thanks for the video,how about msi Center should i uninstall it.I think the msi center Settings overide msis afterburner settings
Thx❤🎉
hey is there any reason to undervolt my laptop if my gpu temps don’t go over 69? with uv at 875 2430 it’s usually 63-64
Если производительность не изменяется, либо уменьшается незначительно, то почему бы и нет
whats the best settings for your EXACT laptop for performance on fortnite, cod warzone and valorant
I was able to get 2550Mhz fully stable!
ok tysm i am going to buy this and I want to get the best performance and you are good with laptops so I asked you, so thank you
ok tysm i am going to buy this laptop and I asked you bcus u are very good with tech (unlike me) so tysm
@@sadaqatt every gpu has different stability points
Hey what do you tink be good my laptop works at 2685 mhz gpu clock and almost always works at 57-60 temps
That’s good! I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
is 2500 mhz the most your laptop can do? because I am going to buy this same one and I want to undervolt it for the best performance
Roughly yes, 2600Mhz is doable on thicker ones
okok i will try 2600mhz and i will see if it works, thank you@@ImWateringPSUs
Can I use this guide with a RTX 4050 mobile?
Yessir you can!
My pc crash when i go over 300 memory ... Please help
Wait, memory frequency or clock frequency? That is a lot for clock frequency but not that much for memory frequency. I think you are adding numbers to the wrong box. Careful. You really can't go over 300 for clock frequency!
Ciao credi posso applicarlo ad un laptop Msi con una 4080?
Sino quanto potrei spingere il clock secondo te?mem sempre +1000?
Grazie
Si, puoi! Circa 1000 sulla memory, si. Ma solo se ti iscrivi al canale :p
@@ImWateringPSUs già iscritto caro 😉💪
Wtf have you done my pc is not booting up any more
What have you done? He didn’t twist your arm… 😂
Ciap ho victus con rtx 4050 che valori usare per diminuire le temperature...migliorare la durata della batteria pur mantenendo performance nel gaming?
Hi, my 4060 laptop seems to have a gpu limiter at 2250 mhz, there is a line at 2250 mhz and no matter if I increase it to 2500 mhz in the console it still shows 2250.... Is there any way to remove it?
Bro i have exatcly the same problem i was thinking that i mada samething wrong
I think u guys have a limited power GPU like 60W
Awesome ! What are the best values for a 3070 ti (140w) ?
Also I can't undervolt my 6800h cpu any suggestions on this ? 😅
I have a dedicated tutorial for laptop RTX 3070 and one for laptop CPU undervolting :)
It works hehe nice bro
my curve stuck, cannot be reset can u help me?
Cntrl z
Amazing video. Like and subscribe!
Thanks a lot, really!🤗
I have the MSI Thin with an 45W 4060. Will this work for me?
Update: Worked fine for me. Copied the curve amd 950mhz on memory easy
@@barenyeager3936 the 45w tgp is already low, it must be really cool already so I'm surprised that you still need to undervolt it
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
@@ImWateringPSUs I actually have another update. I flashed my bios to have the 105w version, and undervolted it to 75w with overclocking. together with the iets gt500 my laptop now performs like every other 4060 laptop :)
@@barenyeager3936 hi can you help me with this ? where i can text you
w t f you doing, it's totally bad undervolting method, man pls delete it from internet
you drunk? it’s the only single undervolting method for rtx 40 gpus 🤣 30 and below undervolte different
4060ti laptop lol
Yup! Same settings
@@ImWateringPSUs Well it does not exist there are no laptops with rtx 4060 ti
@@bhxlegend I'm on one right now. It's not desktop RTX 4060 TI. It is Laptop version but the names are same.
@@Xspy70 sorry but there is no "ti" in rtx4060 for laptops it only exist in desktops I have checked the driver page of nvidia too so bad luck there is no such thing as "RTX 4060ti mobile" alright