Yep, if there is a hiccup in my system I just refer to this to get back to the basics, some people think it’s kinda dumb but it helps me get back to center
You'll be more impressed if you take a bunch of polyfill and put in into the cabinet. You want the kind that's rolled up. Just remove the grille and the speaker itself and just stuff a bunch in. This helps flatten the frequency response. Makes a noticeable quality improvement
IS there a reason you didn't go with the TX 210's with the 10 inch LF?. I usually believe that 10's sound better for mid and highs when used with a sub...
Thanks for explaining the process simply, how would you go at linking a 2nd speaker to each of these speakers, so you have 4 working? I understand they all need their own power cord, but I am not sure about inputs and outputs, or if I would need a Male to Male XLR cable, instead of a female to male XLR. Help please haha
I am new to the set up. I have a question before I purchase a Mackie mixer. How many line mixer will I need to purchase, I have a Roland speaker which I plug my keyboard, voicelive 3 extreme into. I plan on purchasing a tc helicon stage monitor. I have a guitarist and he sings as well so I think I need to plug in two mics, two helicon devices and the Roland speaker. Do I need a mixer with 5 slots? Thank you for your time
Got two of the new models. The limit light will turn red when clipping, correct? Because the green light stays on during use. I just want to make sure I am not abusing their potential.
I was afraid you were going to get some major feedback from the mic's being on top of the speakers. Not sure how you prevented that. Great Video. Do you know if the "link" cable on the speakers is for daisey chaining them, say if you had (4) speakers. I assume a normal m/f XLR cable would would work on a link cable. yes? Thanks again for the video and the tip about rca allowing for less output. Didn't know that.
I'm iffy about buying a built in bluetooth, because technology advances so fast. I'd like to future proof equipment (even if it means more wires). I'm new to this, only because I'm helping my dad choose a "karaoke" machine, but this would be great especially for other family events (birthdays, baby showers etc)
Very nice and informative video...Thanks. Can this setup be used for a small audience of 50/80 people indoor in a home size 300 Sq. Ft. for Live Music + Vocals having Keyboard + Octopad...???
@@miespost Hi, Where can i purchase the same bluetooth receiver please? I went to the homespot site and they don't show the same Receiver that was used here. ,i liked it because it was simple and small, very user friendly, please let me know, Thanks
A DI box is recommended, however if you plan on going short distance between your guitar and mixer then it is not a necessity, a DI box simply converts it from an unbalanced signal to a balanced signal, hence why music shows they tend to DI guitar and pianos etc as they don’t want unbalanced cables running long lengths, and potentially causing interference
The sound is better in cable than a Bluetooth because Bluetooth make sound delay ...if you doing djing..cable are recommended...if you just play song from the phone..Bluetooth is the choice
Hi, most important thing is you need to help us saying all cables you have used cables named. It’s help a lot your video so I can now setup my mixer. Thanks
Using TWO channels to Plug in the iPhone is really silly as you could've plugged BOTH those cables into the 5/6 Channel Strip .... ( i.e. 5/6 ... 7/8 ... 9/10 & 11/12 Strips are Stereo Channels designed for just that ,,, taking two plugs into the same strip ~ they are even marked "L" - LEFT & "R" - RIGHT ). ...This would Free Up Channel 7/8 for another sound source e.g. Laptop audio out, Background Music source etc Those XLR cables are also commonly known as Microphone Cables ... a less confusing term for beginners watching this.
I WAS WONDERING WHAT THOSE HOLES WERE FOR IN THE MIXING BOARD, I WAS TRYING TO PUT MY FINGERS IN, AND DIDN'T FIT, SAME THING WITH THE SPEAKERS, I WAS WONDERING WHAT THOSE HOLES WERE IN FOR IT, MY DIC AND FINGERS DIDN'T FIT. NOW I KNOW. MY COMMENT IS BASED ON THE COMMENTS ON THIS VID.
You have to be careful to use proper speaker cables, with xlr's, and not normal mic cables, even if they are balanced. If not being careful, it's as bad as using normal guitar cables as speaker cables. Something I learnt from experienced sound techies. It's all about safety, for yourself and the equipment you have probably spent a small fortune on.
Кино
Your last statement on this video is what I came for! Thanks! Learn something everyday. Gonna buy one for my dad.
This was so refreshingly simple, thanks for making this! When you’re a noob at all this stuff like me, it was exactly what I needed.
Yep, if there is a hiccup in my system I just refer to this to get back to the basics, some people think it’s kinda dumb but it helps me get back to center
A very nice video on the installation of the PA system. You made it look really simple. Thanks for sharing ...
Great video lesson, thank you very much. I learned a lot about how to set up a PA system with the Mackie mixer
A good presentation.simple but very informative and with a good result.
Nice presentation. Simple set up.
The better explanation that is understandable and organized, that I have found
Thank you for making it plain and simple.
good work, i am loving the outcome song
Absolutely correct and straight to the point.
Good job 🙂👍
I was wondering whether a Mixer can be directly used with a Powered Speaker or not !!! Your video helped me to decide...
Nice little mixer!
Excellent choice of music..
Ratsaman Live Up - Yes-I ! JAH Marley Live!I-ya! RASTAFARI Live!.. .Peace and Blessings ☝️
I'm new to the Alto range but I'm more than happy with quality and sound output, I have the TX308's. Awesome speakers..
You'll be more impressed if you take a bunch of polyfill and put in into the cabinet. You want the kind that's rolled up. Just remove the grille and the speaker itself and just stuff a bunch in. This helps flatten the frequency response. Makes a noticeable quality improvement
@@Yousitech Thank you. Great channel Yousitech....
💯💯💯💯💣💣💣💣♥♥♥♥🔥🔥🔥🔥🍺🍺🍺🍺✌👌👍👉👉😎😎😎😎 your video was very helpful you gave step-by-step
Absolutely Big help thank u
IS there a reason you didn't go with the TX 210's with the 10 inch LF?. I usually believe that 10's sound better for mid and highs when used with a sub...
Nice and simple. Though the power strip tip at 4:31 doesn't really apply, maybe a long time ago, but not anymore. Having clean power helps with noise.
Thanks for explaining the process simply, how would you go at linking a 2nd speaker to each of these speakers, so you have 4 working? I understand they all need their own power cord, but I am not sure about inputs and outputs, or if I would need a Male to Male XLR cable, instead of a female to male XLR. Help please haha
Woow great video thank you.
inbuilt speaker base do create any problem when we increase base from mixer??
Very helpful video❤
I am new to the set up. I have a question before I purchase a Mackie mixer. How many line mixer will I need to purchase, I have a Roland speaker which I plug my keyboard, voicelive 3 extreme into. I plan on purchasing a tc helicon stage monitor. I have a guitarist and he sings as well so I think I need to plug in two mics, two helicon devices and the Roland speaker. Do I need a mixer with 5 slots? Thank you for your time
Great video ~ Thanks
Will this setup apply to an electric guitar and a NuX looper/drum pedal?
Hi there! How do I hook up my ZOOM L8 to my HARBINGER vari v2315?
How does this mixer hook up to Yamaha soundboard (amp) with the speakers that come with it?
Where can I get the Bluetooth receiver you connected to the mixer
Hi, i have profx12, what kind of speaker that i can use? tQ
Got two of the new models. The limit light will turn red when clipping, correct? Because the green light stays on during use. I just want to make sure I am not abusing their potential.
Yes, the light will flash red when limiting. Green means the speaker is receiving audio.
Hi . Can i use Alto Ts-308 as home theater center speaker ! Thanks.
Nice job..
Nice music vibs
Good master!
is good if I use PA speaker as studio monitor but at distance?
I was afraid you were going to get some major feedback from the mic's being on top of the speakers. Not sure how you prevented that. Great Video. Do you know if the "link" cable on the speakers is for daisey chaining them, say if you had (4) speakers. I assume a normal m/f XLR cable would would work on a link cable. yes?
Thanks again for the video and the tip about rca allowing for less output. Didn't know that.
What is the part you use to connect to the phone?
Newbie here,i have 2 powered speaker but no mixer ,can i use both speaker on 1 mic? What cable i need to use?
Thank you so much!
Awesome! Thank you. What Bluetooth adapter are you using?
I'm iffy about buying a built in bluetooth, because technology advances so fast. I'd like to future proof equipment (even if it means more wires).
I'm new to this, only because I'm helping my dad choose a "karaoke" machine, but this would be great especially for other family events (birthdays, baby showers etc)
What type of bluetooth receiver did you use for this video?
Is there a echo Volume in that mixer?
Good stuff!
Can you actually connect more then 2 speakers on the mixer?
Great. Thank you.
Very nice and informative video...Thanks.
Can this setup be used for a small audience of 50/80 people indoor in a home size 300 Sq. Ft. for Live Music + Vocals having Keyboard + Octopad...???
No
@@robertreynolds9961
I do not get you...Why..no?
Not enough spl for all that
What kind or brand that receiver reply pls. Frm. Philippines tnx
thanks bro!!
ty for sharing
Hlo sir what is the full definition and uses of PAN in mixer?? could you please explain ??
Thank you
Hi sir.. great video.... but, can passive speakers hook in directly to the mixer?
nop you have to connect to an amplifier for passive speaker,..
What stand for PA ? Can you please tell me
Can you plug in the XLR cable to mic one and straight into the PA speaker and do it that way?? pls help
Toothical no you can’t you need a Mixer
Yes you can, you don’t have as much control and it is recommended that you use a mixer but if push come to shove you can plug straight into a speaker
However this also limits you to just 1 mic. If I have understood your question correctly
This was so helpful! Thank you! What brand Bluetooth adapter are you using? I think that’s a great idea!
We were using a "homespot" brand receiver.
@@miespost Hi, Where can i purchase the same bluetooth receiver please? I went to the homespot site and they don't show the same Receiver that was used here. ,i liked it because it was simple and small, very user friendly, please let me know, Thanks
Scott Hashempour they might not make that model any more, I’d go to Amazon and try and find a newer version.
is it possible to plug an electric guitar and bass guitar directly to it? or it should have di box. thank you
Use a di box it’s safer
A DI box is recommended, however if you plan on going short distance between your guitar and mixer then it is not a necessity, a DI box simply converts it from an unbalanced signal to a balanced signal, hence why music shows they tend to DI guitar and pianos etc as they don’t want unbalanced cables running long lengths, and potentially causing interference
Also you will obviously need a mixer as the speakers only have 1 input
Thanks , other video to hard for nothing , but you make it simple ,.. can you expline how can i conect me phone and recording ? Please
how did you not get any feedback or noise?? ?
HI, WHAT IS THE COST OF THIS SYSTEM, IS IT EASILY AVAILABLE IN MARKET.
Can you make video same again but..
Mixer desk to Amplifier to graphic EQ to passive speakers..
Would the sound be better if you connect the sound source with a cable vs Bluetooth?
The sound is better in cable than a Bluetooth because Bluetooth make sound delay ...if you doing djing..cable are recommended...if you just play song from the phone..Bluetooth is the choice
Thanks
Interesting...!
Hi, most important thing is you need to help us saying all cables you have used cables named. It’s help a lot your video so I can now setup my mixer. Thanks
Can i have all the list in the video that you've set up.please
Using TWO channels to Plug in the iPhone is really silly as you could've plugged BOTH those cables into the 5/6 Channel Strip ....
( i.e. 5/6 ... 7/8 ... 9/10 & 11/12 Strips are Stereo Channels designed for just that ,,, taking two plugs into the same strip ~ they are even marked "L" - LEFT & "R" - RIGHT ).
...This would Free Up Channel 7/8 for another sound source e.g. Laptop audio out, Background Music source etc
Those XLR cables are also commonly known as Microphone Cables ... a less confusing term for beginners watching this.
This Bluetooth speaker JBL can connect with mixer
Can you drop the speaker link
Can I use this in a small church?
Pls give speaker buying link
Those cords are low impedance cords. The low impedance is much better than the high impedance.
Like me as new to this kind of demo .it would be good to show where those connections go into the mixer which slot exactly👍
Very cool, I am definitely getting this, but two 12" speakers, I want to drive my neighbors, lol neighborhood 😜
the size of the Speakers you use doesn't matter as the concept of hooking everything up remains the same
🇿🇦👌❤️
How would you do this with 4 speakers?
Use Xlr out from one speaker to the next speaker.
could we facetime i need help hooking up two mixers correctly pleaseeeeeee
I WAS WONDERING WHAT THOSE HOLES WERE FOR IN THE MIXING BOARD, I WAS TRYING TO PUT MY FINGERS IN, AND DIDN'T FIT, SAME THING WITH THE SPEAKERS, I WAS WONDERING WHAT THOSE HOLES WERE IN FOR IT, MY DIC AND FINGERS DIDN'T FIT. NOW I KNOW. MY COMMENT IS BASED ON THE COMMENTS ON THIS VID.
rastaman liveup
Never, Never, Never 1. plug your speakers on a power strip (bar), 2. Locate your speakers close to your mics to avoid the 'feedback loop'
Correct! I agree!
Kay.praic
Sub 15 1200w
You have to be careful to use proper speaker cables, with xlr's, and not normal mic cables, even if they are balanced. If not being careful, it's as bad as using normal guitar cables as speaker cables. Something I learnt from experienced sound techies. It's all about safety, for yourself and the equipment you have probably spent a small fortune on.
hehehe