1r-1808 is the high and the 1r-0716 is the reg. Work for Holt Cat Truck centers, Here in Texas. We sell the 1808 to every one with a 3406E, c15, c15 accerts and up for oil filters. Most customer that have MXS and 6NZ will only put the 1808 on their trucks as well as the 1r-0749 fuel filters and water separators. short or tall. Guys are very particular on their filters.
0716s are fine on the 6NZ, 1808s will run a bit higher psi on a 6NZ, but still fine in your application. 1808s were for the ACERT, which needed lower micron rating mainly due to the variable valve actuators. 15 years at Cat Corp in On-Highway Engine group.
1808s over 0716s for the oil filters any day. If you want even better get the white marine oil and fuel filters, not sure of those part numbers off the top of my head but we swapped to them for the couple cats we have at work and no complaints thus far
I appreciate you bringing us along the ride. That's a lot of extra camera work on your end but it's worth it. Enjoy your time and as always, keep safe!
I work at peterbilt in Sioux Falls. 1808 high efficiency oil filters came out for the acerts. On your 6nz I would only run the 0716. We’ve seen nothing but issues with a high efficiency filter on anything older than an acert
If you losen up your shift valve a tad and spin the whole assembly to the right - so your high low switch is kinda facing your air vents - it’s SO much more comfortable. Splitter is at a better angle too, Way more of a natural feel. If I get into a truck now with a normal configured shifter I can’t stand it lol
It may help you shift a little better to spilt some of the gears when shifting it’ll stop it from scratching or wanting to close up on you work that 18 speed
That's a sweet Pete! Packing (hopefully) my green bean beast on there. One question, and this is coming from a guy who loves as many lights as possible on rigs, but how can you stand to have those 4 ambers inside the cab going? Do they have a dimmer?
Damn that old girl sounds great!!! Is it the camera angle or is your air ride seat broken? It looks like you are struggling to see over the steering wheel.
would lose my shit if you rolled up to the 5 valley power rally put on by US Diesel Parts this coming summer. my g56 is for sure gonna be there. also, i'd bet you get stopped at some point for the straps instead of chains, i thought DOT required chains.
@6:49 COME ON GREG DON'T SAY BOYFRIEND AGAIN YOU GOT A WHOLE WIFE AT THE HOUSE.............. JUST STOP IT!!!!!!!!!!!!!!!!!!!!!!!!!!! I hope the was just a joke !
I hope "need" is never a requirement for all my stuff. Half my shat is purely a "want" I do not need 542 hp at the rear on my truck, don't need my SRT 6 speed Challenger, don't need everything in my safe (well maybe, we'll see) or most everything else I have collected in my 64 years. I can say this, if I had the extra coin a 379 would be setting in the shop. Why, because I want one, how could you not.
This irritates me he’s a human just like everybody else but because he’s not for hire he has no elog when in reality he’s doing the exact same as the real truck drivers do 😑
Even with a body and engine or full truck, that trailer can fit easily 3 full vehicles, a little modification to the front of the trailer with extended heavy duty ramps, I would make them adjustable and they should still clear the Catwalk and cab area easily 19:14 👀🫡
Who recalls the true old days when Greg had a 9-5 and daily drove a ranger? Absolutely killing it now, so sick!
Definitely need more in cab driving on the Pete! Pure music to the ears man.
Love the Peterbilt aswell, I just got out of mine. The long Ram is nice too. 😝🤗
1r-1808 is the high and the 1r-0716 is the reg. Work for Holt Cat Truck centers, Here in Texas. We sell the 1808 to every one with a 3406E, c15, c15 accerts and up for oil filters. Most customer that have MXS and 6NZ will only put the 1808 on their trucks as well as the 1r-0749 fuel filters and water separators. short or tall. Guys are very particular on their filters.
Probably an unpopular opinion but the Dually is my favorite truck on the channel hands down
I run a 1808 cat filter in my mxs c15. Never had any issues and we haul 108k regularly
Need to throw some amber under glow on that trailer
0716s are fine on the 6NZ, 1808s will run a bit higher psi on a 6NZ, but still fine in your application. 1808s were for the ACERT, which needed lower micron rating mainly due to the variable valve actuators. 15 years at Cat Corp in On-Highway Engine group.
Your pickup trucks, trailers, big rigs and everything in between are the bomb. You sir, have great taste.
1808s over 0716s for the oil filters any day. If you want even better get the white marine oil and fuel filters, not sure of those part numbers off the top of my head but we swapped to them for the couple cats we have at work and no complaints thus far
That shifting view was fire 🔥
That Pete is like a dream truck for most truck enthusiasts!! Cat powered👌
That Glossy Super shine on the rig setup and the vehicles on the trailer is A1 oooohhhwwweee 15:19
I’ve been watching greg since no boost days and i must say he’s came along ways i’m happy to see him enjoying life 🤘
When you pulled that loaded hopper a couple years ago, that was way more weight than this trailer and 2.5 trucks
I appreciate you bringing us along the ride. That's a lot of extra camera work on your end but it's worth it. Enjoy your time and as always, keep safe!
Definitely can’t wait for the Peterbilt and trailer giveaway that’s what I’m really waiting for!!!!!!!!!!!!!!!!!!🎉🎉🎉🎉🎉
Peterbilt sounds so good!
Hey that shifting view was fire😊🎉🎉🎉 love it
18:29 great lights setup
All i can say greg is amazing work!!! Keep it up! 💯
Glad to see y’all back in my home state, I won’t make it to LST this year though I’ve got a new born to tend to this time.
Long Live Dolph 🐬👑
Need to add 20 feet or so on to couple bays for loaded semi parking😂
Worked at car about 5 years. 1r 1807 (high efficiency) is what we put on every truck and off-road equipment that took that size filter
17:55 OOOUUUFFFFFFF damn boi!
Ahhh nah be cause I live in the Bowie county area and seeing the clips from you driving trough Texarkana was just so amazing to me
That Peterbilt sounds good.
I work at peterbilt in Sioux Falls. 1808 high efficiency oil filters came out for the acerts. On your 6nz I would only run the 0716. We’ve seen nothing but issues with a high efficiency filter on anything older than an acert
Greg never fails
Man that Pete sings from inside the cab 👌🏼
That would look awesome in the legacy color
If you losen up your shift valve a tad and spin the whole assembly to the right - so your high low switch is kinda facing your air vents - it’s SO much more comfortable. Splitter is at a better angle too, Way more of a natural feel. If I get into a truck now with a normal configured shifter I can’t stand it lol
This is sick . I got my class A CDL today just so I can get me peterbuilt to daily Around 😂
Heck yea, so close to me, shame I'm busy with work.
0:13 excellent setup, i dream of something similar, when i get access to a opportunity or money
I work at a love's travel stop a diesel mechanic Tifton, Ga. Would love to see the rig and get an autograph! Wrech workz!
If you back the first truck on and put the rear tires as close to the edge as possible, you should be able to fit all 3 trucks on there.
I’m ready to see the shorty and the 05 together!
keep that peterbilt on the road
Got to meet him picking up my work truck really nice guy
they ever give you trouble for passing scales?
It may help you shift a little better to spilt some of the gears when shifting it’ll stop it from scratching or wanting to close up on you work that 18 speed
10:45 sickasf
bumpin dolph 🔥🔥🔥
You need the 24.5 with lo pro tires on the front! Such a good looking setup
That's a sweet Pete! Packing (hopefully) my green bean beast on there. One question, and this is coming from a guy who loves as many lights as possible on rigs, but how can you stand to have those 4 ambers inside the cab going? Do they have a dimmer?
So im a truck driver and I have a Pete as well, and I have lights in my cab. It's actually very nice having them!
Not as bright as they look, I have red interior lights in my cab and it’s easy on the eyes during the night
My truck was lookin good in the middle of that trailer!
Hahaha I love Greg, read between the lines boys. Be careful with my truck Greg.
I like the blacked out windshield in the rig. Never seen done in a Semi before. Looking real illegal wonder the percent darkness it’s at?
Hey Greg just had someone to try get in touch with me from wrench work and I know the drawing not over with
I thought you needed like a “Not for Hire” decal or something like that?
I'm surprised you didn't bring the camper
The pete could use the @shtube touch , either way that combo of trucks is sweet !
Hola amigo cómo estás saludos acá de Austin Texas Freddy Delgado nice video ánimo
Y’all drove through Waco!?! Should lmk Id love to get to meet y’all!
When you scrape your bumper pulling up to the pump 😅
Damn that old girl sounds great!!! Is it the camera angle or is your air ride seat broken? It looks like you are struggling to see over the steering wheel.
you would back up the 1st truck to overhang the bed
Can you drop rear bags so it'll sit level?
@adept_ape is your guy for all things Cat
Move at night under the cover of darkness 😎
Does Charlie sell 1st gen lift kits?
Put full rear fenders on that thang
Let Kaplan drive the peterbilt!!!
Greg should do a month of freedom and upload a video everyday for a month like Cleetus does 😂
Do you even run plates on that pete lol
What straps are those?
Also curious
Is the Pete a 379?
You like the C15 youd love the C18 😂
would lose my shit if you rolled up to the 5 valley power rally put on by US Diesel Parts this coming summer. my g56 is for sure gonna be there.
also, i'd bet you get stopped at some point for the straps instead of chains, i thought DOT required chains.
Dot doesn't mess with the you?
Green bean coming home to me! I can feel it!!
you loos a little weight Greg looking good bro!!!!!!!!!!!!!!!!!!!!!!!!
Fly casual Chewie
More JAKE racket please!
I know nothing about peterbuilts , but it looks sick layed out on pavement
Looks short for a 53’ trailer 1:12
What does he do for a living, i NEED to know 😂
🔥 🔥 😎
Anyone ever notice there’s never a license plate or numbers on the Pete
Hey man!! Just entered to win this truck! Bought a knife🎉
that c15 sounds good. but a n14 Cummins sounds better
😊
love from ireland first video i watched and loving it already that black truck is sexy
Man you should have went all mechanical. Everyone has a 379.
You are no where near maxed out. Great Pete but even 2 trucks and a frame is a job for the dually. You have a semi so make the most of it.
Well, that looks fun. Said no one.
First!!!
@6:49 COME ON GREG DON'T SAY BOYFRIEND AGAIN YOU GOT A WHOLE WIFE AT THE HOUSE..............
JUST STOP IT!!!!!!!!!!!!!!!!!!!!!!!!!!!
I hope the was just a joke !
I’ve said this before in the past but having that Peterbilt is OVERKILL. He doesn’t need it. Waste of money.
Hater
Lmao overkill is a good thing 💪🤙
I hope "need" is never a requirement for all my stuff. Half my shat is purely a "want"
I do not need 542 hp at the rear on my truck, don't need my SRT 6 speed Challenger, don't need everything in my safe (well maybe, we'll see) or most everything else I have collected in my 64 years.
I can say this, if I had the extra coin a 379 would be setting in the shop. Why, because I want one, how could you not.
@@parkergipson6547 not a hater, just a realist.
@@raidlover6941why do you care lol its his money his truck not yours, have fun having only the things you need the rest of your life
😍😍😍😍👍👍👍💪💪😁😁😉😉👌👌
1
bummer.... built a shop that you can't even pull the truck and trailer into.....
I haven't watched you vids for a bit but you sound like like @DurtymaxJack
This irritates me he’s a human just like everybody else but because he’s not for hire he has no elog when in reality he’s doing the exact same as the real truck drivers do 😑
Even with a body and engine or full truck, that trailer can fit easily 3 full vehicles, a little modification to the front of the trailer with extended heavy duty ramps, I would make them adjustable and they should still clear the Catwalk and cab area easily 19:14 👀🫡
What straps are those?
Also curious