thanks a lot I am studying mechanical engineering and it really helped me in my project. A really nice Tut, but still it took me a few times to find out how it properly works
And, Our all videos practice drawings are available here👇👇👇 caddesigns.in/blog/ You can follow this website for all practice drawings and AutoCAD Blocks You are welcome...!
You are Welcome...! Our all videos practice drawings are available here👇👇👇 caddesigns.in/mechanical-pdf-practice-drawing-sheets/ You can follow this website for all practice drawings and AutoCAD Blocks
Awesome bro, but how do you manage to use the quick trim option continuously without having to click the quick trim icon after trimming each line?? every time I trim a line the quick trim icon gets unselected and hence I'm having to go back and forth between the sketch and the toolbar :(
Just use double click for multiple use. When use Single click - "it's for Only Single use" When use Double click- "it's for multiple use" That's it. You are Welcome...!
@@CADDesigns Thank you very much, also I believe I followed all the steps you mentioned but still I'm not getting "the mechanism can be simulated" pop up that you got at around 8:57 . and when you click the "simulation" icon, I get only one pop up, whereas you get two pop-ups (9:12). I"m not getting the "Kinematics simulation- Mechanism.1" pop up. and hence not able to animate :( . please help
I tried Same procedure for making only gear, but it did not pad @ 4.27. there is message display that " you must spacify construction geometry". How to fix it?
That gear 2D sketch is not closed profile i think. Once again create exact closed profile with exact Geometric constraints. It will works. Thank you for your feedback...! If you have any doubt, comment again. You are Welcome...!
Our all videos practice drawings are available here👇👇👇 caddesigns.in/mechanical-pdf-practice-drawing-sheets/ You can follow this website for all practice drawings and AutoCAD Blocks
I HAVE DONE ALL THE STEPS EXACTLY THE SAME, I HAVE TAKEN THE POP-UP SHOWİNG THİS CAN BE SİMULATED BUT I CAN'T TURN MY GEARS İN SİMULATİON TOOL ALTHOUGH I CAN TURN MY GEARS WİTH "SİMULATİON WİTH COMMAND" WHAT SHOULD I DO??
After doing this my setting is change.In my catia software when we select any tool like profile it doesn't show 1,2..mm.it shows -1'#10mm.i have reset parameters,delete catsetting, reinstalled software still it doesn't work. Please help
I followed your steps exactly, and when it came to the kinematics simulation, it doesn't work. It tells me "this mechanism cannot be simulated. If you want to simulate it: -Add a fixed part" What am I doing wrong?
@@crymetyme320 When you fix the base part , it will show one pop-up (The mechanism can be simulated). That pop-up is the main important thing for kinematic simulation.
After applying simulation tools, once fix the base part. then you can receive the "Mechanism can be simulated" popup. This popup is most important for this simulation.
And, Our all videos practice drawings are available here👇👇👇 caddesigns.in/blog/ You can follow this website for all practice drawings and AutoCAD Blocks You are welcome...!
i want to learn how to make this, i need isometric figure so that we can learn it on our own,, theres no point watchng the video and copying it as it is.
Present drawing sheet not available for this video model. But, we have one gear model drawing. You can follow this link for the Drawing sheet. caddesigns.in/gear-wheel-catia-v5-practice-design-with-drawing-sheet/ You are Welcome...!
Más bien Engranajes de Guerra, referido a los mecanismos por los que se mueve y desarrolla un conflicto bélico. Es bastante más profundo que "guerra de los engranes"
Dear Nimisha, I prepared this gears without exact dimensions. If you want exact dimensions for Gears follow our website. 👇👇👇 caddesigns.in/gear-wheel-catia-v5-practice-design-with-drawing-sheet/ You are Welcome...!
I'm busy with my projects. That's why, i maked this video without voice. And Noice problem also. I'm sure, I will make next video's with voice. Thanks for your feedback....! You are Welcome...!
Thanks for this example, and I can understand the simulink in catia
GOOD GOOD THANK YOU, BUEN VIDEO, CASI NO HAY EN INTERNET TRABAJOS ASI FELICIDADES
VOCÊ ME PASSOU NUMA MATERIA GRAÇAS A ESSE VIDEO, OBRIGADO!!!
brabissimo
👍 Très utile ! ça donne un bon coup de pouce, merci et Bravo !
thanks a lot I am studying mechanical engineering and it really helped me in my project. A really nice Tut, but still it took me a few times to find out how it properly works
سلام عليكم
I´ve finished all this tutorial!! many thanks!
You are Welcome...!
this exam is perfect understand ...part design ,,assembly desgin,. stimulation ...
Thank you from Germany.The best Movie Tutorials
Thank you..! You are welcome...!
ruclips.net/video/DpOJfQuICTA/видео.html
Thanks a lot Sir god bless you
just completed the simulations......thanks good work
Thanks for your Feedback...!
You are Welcome..!
Absolutely brilliant!
Thanks for your feedback...!
You are Welcome...!
Thank you so much for this video ... finally learned the concept of simulation...
You are Welcome...!
And, Our all videos practice drawings are available here👇👇👇
caddesigns.in/blog/
You can follow this website for all practice drawings and AutoCAD Blocks
You are welcome...!
Nice work :)
Thank you very much for this awsome video
Thank you very much, bro!
Gaming De La Tara
Thanks for watch..!
You are welcome...!
For more design videos SUBSCRIBE my channel and Activate BELL 🔔 icon for Notifications
I'm having troubles with the "Quick Trim" tool. Everytime I use it I need to remove some coincidence points to keep deleting the edges. Is it just me?
Great Video To Learn Sir
EXCELLENT VIDEO, I DID THE SAME AND GOT THE PERFECT RESULT
Great 👍
You are welcome...!
Good simulation. I've understood all steps.
How you move the gear while doing in assembly..... Plz i did not font the way can please help me
Really awesome
wow!!!!!!! THANK YOU
Thanks for your Feedback.
You are Welcome....!
Nice can understand well
Thanks for your Feedback SAI...!
You are welcome...!
Awesome 🤙🏻
Thanks for your Feedback...!
You are Welcome...! 👍
Thanks sir Love you sooooooooooooooooooo much good work
Thanks for your feedback.
You are welcome...!
Wow thank you 😊
Thanks for your feedback...!
You are welcome Shaikh Nabeel...!
Thanks............
Super anna
Thank you
Perfect
You are Welcome...!
Good desine
at 3:25 u have drawn directly placing over a point .how did u sported out that point?
unclick snap to point at sketch tools
thanks boss
You are welcome...!
think you
What's the length and breadth of the rectangle base
My profile tool while creating gear teeth directly move by 10 degree like 30 then 40 not in between that plz sir tell me what to do.
Music like in RTS game from 1999 year
Thanks for Your Feedback Jan...!
You are Welcome...!
The first thing that came into my mind was Age of Empires 2!
👍👍👍
You are Welcome...!
Our all videos practice drawings are available here👇👇👇
caddesigns.in/mechanical-pdf-practice-drawing-sheets/
You can follow this website for all practice drawings and AutoCAD Blocks
Hey I want to see pulley and belt Creation and animation can you help me
Awesome bro, but how do you manage to use the quick trim option continuously without having to click the quick trim icon after trimming each line?? every time I trim a line the quick trim icon gets unselected and hence I'm having to go back and forth between the sketch and the toolbar :(
Just use double click for multiple use. When use Single click - "it's for Only Single use"
When use Double click- "it's for multiple use"
That's it.
You are Welcome...!
Thank you very much
@@CADDesigns Thank you very much, also I believe I followed all the steps you mentioned but still I'm not getting "the mechanism can be simulated" pop up that you got at around 8:57 . and when you click the "simulation" icon, I get only one pop up, whereas you get two pop-ups (9:12). I"m not getting the "Kinematics simulation- Mechanism.1" pop up. and hence not able to animate :( . please help
@@aaroneipejohn5715 After apply Mechanism, Just fix the base part by using "Fix part" tool. then you will get that popup.
You are Welcome...!
@@CADDesigns yaya it worked🎉🎊🍾
how can i install CATIA V5 ...... PLZ CAN YOU GIVE ME ANY SUGGESTION
while drawing gears, how to connect a line to circle? Line is not intersecting the circle. I am not able to draw the teeths.. can anyone plz help🙏
i too did same but at stimulation part its showing over constrained
The Video is very helpful but half of it is blurred.
what is the purpose of multi pad?
Dear sir after selecting existing components parts not appears on screen but rename option appears.pls tell me what to do?
Choose fit option from "view toolbar"
Sir still not find my compound after selecting existing compound list
I tried Same procedure for making only gear, but it did not pad @ 4.27. there is message display that " you must spacify construction geometry". How to fix it?
That gear 2D sketch is not closed profile i think. Once again create exact closed profile with exact Geometric constraints. It will works.
Thank you for your feedback...!
If you have any doubt, comment again.
You are Welcome...!
@@CADDesigns thanks for your response, it's working. Thank you
Tq
You are Welcome...!
Our all videos practice drawings are available here👇👇👇
caddesigns.in/mechanical-pdf-practice-drawing-sheets/
You can follow this website for all practice drawings and AutoCAD Blocks
Bro could you please tell me where can i get blue print of this design
Hi, excuse me, i have a doubt
Why always that i try to use “pad” after using “rotate” it doesn't allow me to do it ?
Go to "Sketch Analysis" and see if you have any open profiles.
Adilson Chrestani J. I did it, but the open profiles are so small
@@franciscoangellopezgonzale5345 could you send me a screenshot, please?
@@adilsonchrestani how can i send you the screenshot?
@@franciscoangellopezgonzale5345 adilson.chrest@gmail.com
I HAVE DONE ALL THE STEPS EXACTLY THE SAME, I HAVE TAKEN THE POP-UP SHOWİNG THİS CAN BE SİMULATED BUT I CAN'T TURN MY GEARS İN SİMULATİON TOOL ALTHOUGH I CAN TURN MY GEARS WİTH "SİMULATİON WİTH COMMAND" WHAT SHOULD I DO??
bgm is annoying. but your video is helpful, thanks.
😇
After doing this my setting is change.In my catia software when we select any tool like profile it doesn't show 1,2..mm.it shows -1'#10mm.i have reset parameters,delete catsetting, reinstalled software still it doesn't work. Please help
Go to Options, change Unit parameters 🕵️👍
Tools/Options/General/parameters/Units tab
Follow this path 👆
I followed your steps exactly, and when it came to the kinematics simulation, it doesn't work. It tells me "this mechanism cannot be simulated. If you want to simulate it: -Add a fixed part" What am I doing wrong?
After Apply the simulation tools fix the base part once again. Then it will work.
You are welcome...!
@@CADDesigns thanks for the reply, but what do you mean "fix the base part"? What am I suppose to do?
@@CADDesigns never mind I found the problem, thank you!
@@crymetyme320 When you fix the base part , it will show one pop-up (The mechanism can be simulated). That pop-up is the main important thing for kinematic simulation.
i am not getting simulation complete information box what should i do?
pl suggest....
Shashikant Jadhav same here
@@humzafarrukh same
Are the teeth touching each other
why did you put AutoCAD in the title?
Because, I have another channel on AutoCAD . "Engineer AutoCAD tutorials"
AoE II Music xD
My gear part is not moving .... I check the simulation but i can't 😢😢
I have an error the error is this mechanism cannot be simulated .if you want simulate it :;add a fixed part and how to solve the problem
I dont know why but when i try to create the simulation nothing happens. It just disapears.
After applying simulation tools, once fix the base part. then you can receive the "Mechanism can be simulated" popup. This popup is most important for this simulation.
And, Our all videos practice drawings are available here👇👇👇
caddesigns.in/blog/
You can follow this website for all practice drawings and AutoCAD Blocks
You are welcome...!
@@CADDesigns thanks
Mechanism can not be simulated ....how to fix this problem???
Once fix base part. Then it's showing "Mechanism can be simulated" pop-up.
You are welcome Shubham...!
i want to learn how to make this, i need isometric figure so that we can learn it on our own,, theres no point watchng the video and copying it as it is.
Present drawing sheet not available for this video model. But, we have one gear model drawing. You can follow this link for the Drawing sheet.
caddesigns.in/gear-wheel-catia-v5-practice-design-with-drawing-sheet/
You are Welcome...!
how i download it
Osea que Gears es engranes???
Entos quieren decir que mi juego favorito se llama la guerra de los engranes???
Shhhh el Mr TOEFL, deberías dar clases de inglés
@@charlesmanson6604 ahuevooo!
Más bien Engranajes de Guerra, referido a los mecanismos por los que se mueve y desarrolla un conflicto bélico. Es bastante más profundo que "guerra de los engranes"
I was just getting problem of kinematics
part kaise download kre
Please also attach the dimensions file
Dear Nimisha, I prepared this gears without exact dimensions. If you want exact dimensions for Gears follow our website. 👇👇👇
caddesigns.in/gear-wheel-catia-v5-practice-design-with-drawing-sheet/
You are Welcome...!
@@CADDesigns Thank you so much sir...
Hiii
GooOOooOoOd
i cannot make it move T.T
Stop this music please, really ! Explain the different actions that you doing on Catia ;)
I am deaf
im gay
It's a bad manners design with music. Are you doing time pass.
I'm busy with my projects. That's why, i maked this video without voice. And Noice problem also.
I'm sure, I will make next video's with voice.
Thanks for your feedback....!
You are Welcome...!
Thank you