Part Design also has Multi-sections Solid that can be use in the same way that Multi-sections Surface is used. It eliminates a step. I did not create Sketch.3 and Sketch.4 and just used the surfaces as another user suggested.
we close the surface using some pairs of points, these points should be placed in corresponding positions; please refer to the official CATIA v5 documentation for more info
Yo dumb question but how do you quick trim multiple lines in quick succession (like at 2:27)? When I do it after trimming one line I have to click on the Quick Trim Icon again to activate the tool. Do you have to hold some key down or something?
Great video! I have noticed that many users have copied your designed part (consider to update your video tags/keywords as this is not a top listed video for CATIA twisted part). Even the 2D drawing you created for this video has been reuploaded by other RUclips accounts! I have addressed this within my most recent video introduction of a video where I presented a workflow that can enable multiple twists within CATIA V5 (using Imagine & Shape paired with 3ds Max) which has some advantages but also limitations compared to Part Design / GSD workflow presented by you.
When I open Multi Section Surface and Pic the 1st sketch its selects ok but when I try to pick the second sketch nothing happens. It will not allow me to select the second sketch. Can you provide any help with this?......thank you
Try it in generative sheetmetal. The twisted surface would be a user defined surface. Once complete the model will unfold flat. Very useful for the toolmaker.
Thanks. I have some issues with my model. The edge of my bend is not on tangent with my part. Any help would be appreciated. Can i send you a screenshot ?
What kind of instructions do you need ? :O The video tutorial is done very slow to see the icons, planes, edges etc. If you are indeed a beginner I suggest to watch many others tutorials before this on, it is not for the first level of CATIA knowledge.
@@workbenchstuff The video is really amazing itself and yes it is slow but the screen isn’t clear to see what tool is being used. A voice instruction would be really great! That’s all I wanted to say. Thanks anyway. I’ll surely look at my basics before.
Hello, I have a question: do you have a license from d'assault systems or is it a cracked version? Knowing the prices of Catia licenses it is just curious...
The student license is 100eu and has the complete package. The only limitation is that you cant sell your designs as they are limited to other student licenses. In October Dassault Systemes give the student licenses away for free (When you apply and can confirm you're a student.)
no voice because: i am not a native english speaker, the video is explicit enough and adding voice is not necessary, I use the tutorials with my students in class, so it could be a real mess to hear my voice from 20 computers..
Thanks for answer,buti try that it create just like 5.32 in this video. Too much bend at the center point and too thin. İn this video fixing it at the last step(6:00). But i cannot fix in fusion 360
Any idea on getting a job after completing a certification in CATIA, pro-e, hypermesh and AutoCAD Everyone says it's got scope and I see none. At the Same time companies expect 5yrs experience on the other hand no one is ready to give an opportunity to a fresher.
Depends where you live, and if it's only a certification and not a diploma. But you clearly can find a designer jobs mostly anywhere, you'll have to earn trust to get big tasks
Here is the Onshape Document on the construction of this: cad.onshape.com/documents/196e76c1cdfa62dae6396e17/w/cd1b1357e6fb84472437cebc/e/9452fe3cd7f091676b4e1b16
При любом варианте построения детали в Solidworks, не совпадает конечный объём и общая площадь поверхности детали построенной в CATIA. Вот такая вот нестыковка. Какая то программа безбожно врёт!
no audio because there is nothing to say, the video is very explicit, done cery slow to be easy to understand, please view it on your laptop, of course the cursor is not so visible on your phone
@@workbenchstuff okay, still some improvement can be done, u can stop your pointer at the icons for little log so that we can read it's function, also adding voice would be great..🙂 overall nice video 👍
why's that ? the views are enough to understand the model, even without the isometric representation. I am of old school, really learned CAD in faculty 🙂
i am not a native english speaker and...what to tell more than it is already in the video ? do someone needs to hear me saying "select that point and draw a spline tangent to... " ? what do you mean "zero marks" ?
Nice Tutorial mixing Part Design with GSD. Fun to draw, too. Keep up the nice work.
Very very very nice!! Great video. Thanks!
Thank you very much! Please be sure you subscribe to my channel and to take a look on other video tutorials.
Thank you very much.
Nice work
Very nice bro ,
Part Design also has Multi-sections Solid that can be use in the same way that Multi-sections Surface is used. It eliminates a step. I did not create Sketch.3 and Sketch.4 and just used the surfaces as another user suggested.
I don't remember if I managed to model the part with Multi-section Solid, it's not exactly the same, I'll try it anyway, thx
Hello, I'm interested in what exactly is the purpose of the ‘replace closing point’? When and how it is used? Thank you for the time!
we close the surface using some pairs of points, these points should be placed in corresponding positions; please refer to the official CATIA v5 documentation for more info
the purpose of replace points is to avoid cuspide, the "closing points" should be at a similar location on both of the section profiles
Yo dumb question but how do you quick trim multiple lines in quick succession (like at 2:27)? When I do it after trimming one line I have to click on the Quick Trim Icon again to activate the tool. Do you have to hold some key down or something?
yes, i double click on the yellow rubber, after trimming i click on it again to deactivate
Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.
nice sir..
The same part modeled in Autodesk Inventor - here: ruclips.net/video/I0zs9A9zX5I/видео.html
谢谢，很有帮助
Thanks ❤
Great video! I have noticed that many users have copied your designed part (consider to update your video tags/keywords as this is not a top listed video for CATIA twisted part). Even the 2D drawing you created for this video has been reuploaded by other RUclips accounts! I have addressed this within my most recent video introduction of a video where I presented a workflow that can enable multiple twists within CATIA V5 (using Imagine & Shape paired with 3ds Max) which has some advantages but also limitations compared to Part Design / GSD workflow presented by you.
Thank you !
super sir
When I open Multi Section Surface and Pic the 1st sketch its selects ok but when I try to pick the second sketch nothing happens. It will not allow me to select the second sketch. Can you provide any help with this?......thank you
I got it sorted out. Sketch was the issue
@@gman5986 The sketches 3 and 4 aren't neccassary. Just select planar surfaces which he uses for the sketches.
Can you please make a video of propeller rotor blade using symmetrical airfoil in catia
do you have a drawing ? usually i don't make video tutorials on request, but i may take a look
Try it in generative sheetmetal. The twisted surface would be a user defined surface. Once complete the model will unfold flat. Very useful for the toolmaker.
can you help me with a video tutorial ?
Very helpful, although somewhat hard to see details on mobile phone screen!
Thank you very much! 👍🏻🙋🏼♂️
Sorry about that, please use a laptop or a monitor, there are many details you may miss !
@@workbenchstuff It's OK, the videos are very well made!
nice vidios sir
pratical solution and commonly ı will use this way :)
Merhaba, makine ressamı mısın?
sounds good
subscribe TPKAM as well
Autodesk Inventor Version: ruclips.net/video/pWf5TLrQ2tQ/видео.html&ab_channel=TonyRios
Let the catia 3d model done, then after that how it use to cast that tool??
i am not sure i understand your question, this part can be made using plastic deformation
Thanks. I have some issues with my model. The edge of my bend is not on tangent with my part. Any help would be appreciated. Can i send you a screenshot ?
watch the video again carefuly, at some moment I select an edge to establish the tangent, please do the same
very nice brou
Thanks
I would have done only one spline, then a rectangular extrusion following the spline
try it, i dont know if it works
Please provide instructions. It’s really difficult to figure out what is been done for users like me new to Catia.
What kind of instructions do you need ? :O The video tutorial is done very slow to see the icons, planes, edges etc. If you are indeed a beginner I suggest to watch many others tutorials before this on, it is not for the first level of CATIA knowledge.
@@workbenchstuff The video is really amazing itself and yes it is slow but the screen isn’t clear to see what tool is being used. A voice instruction would be really great! That’s all I wanted to say. Thanks anyway. I’ll surely look at my basics before.
good
Hello, I have a question: do you have a license from d'assault systems or is it a cracked version? Knowing the prices of Catia licenses it is just curious...
You don't ask a question like that on the internet!
10,000.00 Dollars.
The student license is 100eu and has the complete package. The only limitation is that you cant sell your designs as they are limited to other student licenses.
In October Dassault Systemes give the student licenses away for free (When you apply and can confirm you're a student.)
@@13D00_ Would you happen to know where I can get a student license in California,USA ? Thank You.
@@gman5986 yeah I think it's worldwide from their site? Not sure tbh
C chanel bend in catia v5
Everything fine until I reach the last part where we join with the pathways.
My catia is in german and don't know what to select in the endpoints.
Change it to English from the menu Tools -> Customize -> Options
It is a good video, but please make a voice-over next time 👌🏼
no voice because: i am not a native english speaker, the video is explicit enough and adding voice is not necessary, I use the tutorials with my students in class, so it could be a real mess to hear my voice from 20 computers..
@@workbenchstuff you could use the translate program's voice if you like to realize a voiced video
Hello can i get the file with all these parts ! Thanks a lot btw for your videos :D
If you wanna this piece you will find it in my channel
Goooooooodďddd
hi how to make this in fusion 360. thanks
Use Interpolation Spline in 3D Sketch Tools for connecting between 2 Solids & loft using Interpolation Spline as Rails..
Thanks for answer,buti try that it create just like 5.32 in this video. Too much bend at the center point and too thin. İn this video fixing it at the last step(6:00). But i cannot fix in fusion 360
@@tegmentoo constrain the sketch at the ends exactly
Bonjour, pour une pièce pliée ce n'est pas selon moi la bonne méthode, créer une surface de la pièce puis l'épaissir est une approche plus réaliste.
hi and thank you for watching this video tutorial, please, can you provide a more appropriate solution/video tutorial ?
Hi, it is much better and faster to use a multi-section solid ;-)
Nice.#DESIGNMANSION
Any idea on getting a job after completing a certification in CATIA, pro-e, hypermesh and AutoCAD
Everyone says it's got scope and I see none. At the Same time companies expect 5yrs experience on the other hand no one is ready to give an opportunity to a fresher.
Depends where you live, and if it's only a certification and not a diploma. But you clearly can find a designer jobs mostly anywhere, you'll have to earn trust to get big tasks
TRUTH
the bodies relative positions as well as their contacts are ambiguous. how fix to the reason? URGENT
Sorry, but I don't understand your problem. The video is very clear and the part is smooth.
Thank you Ergul send program
If you wanna this piece you will find it in my channel
hlo im interested in your drawing so can you tell me about shape designe
I am not sure I understand your message. Please take a look on my 200+ video tutorials and you'll find for sure what you want.
I think it should be builded in a sheet metal, isn`t it?
it should, but I dont know how to obtain it in that Sheetmetal module :|
Looks like this - 1J0 711 183 D
Hello, I don't use my CATIA platform much! If anyone wants I can give it away for exercises or training!
I'm interested. Do you have still have it?
Please create the same on PTC Creo and upload the video
sorry, but i am not using Creo
both ends are same,why you draw separate !? create one and copy and rotate it...!!!!?
sure, i could do that, thx
Here is the Onshape Document on the construction of this: cad.onshape.com/documents/196e76c1cdfa62dae6396e17/w/cd1b1357e6fb84472437cebc/e/9452fe3cd7f091676b4e1b16
При любом варианте построения детали в Solidworks, не совпадает конечный объём и общая площадь поверхности детали построенной в CATIA. Вот такая вот нестыковка. Какая то программа безбожно врёт!
No audio, pointer is also not visible sometimes.. little difficult to understand
no audio because there is nothing to say, the video is very explicit, done cery slow to be easy to understand, please view it on your laptop, of course the cursor is not so visible on your phone
@@workbenchstuff okay,
still some improvement can be done, u can stop your pointer at the icons for little log so that we can read it's function, also adding voice would be great..🙂 overall nice video 👍
yes, in more recent videos there are some inprovements, I made the videos slower with stop on icons
@@workbenchstuff great 👍
I think draft part should have hidden view
why's that ? the views are enough to understand the model, even without the isometric representation. I am of old school, really learned CAD in faculty 🙂
@@workbenchstuff i also learned most software from solidwork to dellcam
No audio
there is no voice, what do you want to hear ? isn't the free video enough ?
Hey do it slowly ur speed is at high level
Nd add Ur voice in it
You realize the last line on the profiles is not constrained.....
indeed, but this is not affecting the 3D model, just constrain it when you draw the sketches
I did the same thing in SolidWorks 2017 and much faster.
well done !!!
no voice
1:33 Si esa parte es idéntica a la que ya izo, para que la dibuja de nuevo? ja ja jaaaa
4:15 Otra vez la burra al trigo! ja ja ja
if you don't add the voice...You get zero marks....Understand bro
i am not a native english speaker and...what to tell more than it is already in the video ? do someone needs to hear me saying "select that point and draw a spline tangent to... " ? what do you mean "zero marks" ?
204k views means people finds it uselful.. "Zero marks" .. who cares..😉
Learn properly I am beginer
Not the best and not ideal geometry in truth. Non-uniform thickness at the bend spoils the whole picture.
We are waiting for your video tutorial to see a better solution.
@@workbenchstuff maybe bit later in nx