Mingda Magician X - 3D Printer - Unbox & Setup
HTML-код
- Опубликовано: 19 авг 2021
- Magician X Live on Kickstarter
Early bird discount: bit.ly/37TgELe
Buy on Amazon: geni.us/0O7uz7
Recommended: geni.us/JustVlads
Equipped with a 3D touch sensor, using the matrix 16 point measurement method, the 3D printer can auto-leveling the printing bed, from MINGDA Magician X 3D printer you can say goodbye to manual leveling and turn in an intelligent 3D printer time.
MINGDA Magician X 3D printer equipped with 5 TMC2208 Silent Drivers; with upgraded Fans of Extruder and modular mechanical structure.you will not hear annoying noises when printing.Brand new operation UI system and 3.5" color touch screen greatly improve user experience.
Magician X printer build in double-gears direct extruder.High extrusion force make the filament feeding more smooth.The upgraded extruder design in modular make it lightweight, so the Magician X 3D printer printing more fast and more efficient.Double filament holder design support flexible assembled on the left and right sides.
The same as most recent printers, MINGDA Magician X can resume printing from the last recorded extruder position after suffering unexpected power outages, so that avoid reprinting, saving time and filament.
Carborundum Glass Platform:The 4th generation glass platform enable the hotbed heat up quicker and prints adhere better without the warping.Super flat, strong adhesion and easy to remove the model.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/ - Наука
New Channel: www.youtube.com/@Just_Print
Buy it here: geni.us/0O7uz7
Recommended: geni.us/JustVlads
Beautiful Content I'm inspired. 🙏❤️
Captivating sound intro.
Thanks!
Amazing
The deer actually doesn’t take too long! It’s a flat deer with like little movable joints in between and it has little antlers you can attach
Can you review the sidewinder x2 from artillery
@Just Vlad, I have been watching your videos for a long time, and I do like how you are very detailed with assembly of the 3d printers, however, I have had problems with the Mingda line. One of the problems with Mingda line is that they love to put hot glue on the connections to everything on the main board, as well as on the power connection as well. The power connection usually has a thin wire that sits in the connector and wonder why Mingda, as well as Creality refuses to put on ferral connection plugs for the power connection plugs. It would prevent a lot of problems, in my opinion. This has happened to me a few times so far. The Mingda Rock 3 is an example, as well as the Creality Ender 3 as well. Do you have that problem as well?
Nice review! Thanks!
What is the USB-C used for ? U-Drive or connecting to a PC / laptop?
I approve of the trend towards wider x and y axis extrusions on openbuilds style printers (sidewinder, sovol, i think some of the cr10s). Allows significantly greater rigidity&less play in the toolhead carriage. I hope to see designs continue this trend.
Also you don't need to babystep the z-offset when using the nozzle as the probe; "babystepping" is used to account for the height diff between ABL trigger point and nozzle tip. That's the main benefit of this type of mesh bed leveling.
Would you mind doing a video disassembling the toolhead & hotend? It's very difficult to tell what fans, what hotend style, nozzle type, heater block style, etc. I really don't like the black box design with none of the working parts accessible; troubleshooting a clog would be challenging w/ this design.
That was my thought exactly with the Z offset and I wondered why people keep changing it on this style of bed leveling
do you think the fact that the roller filament placed on top affects the end quality since there is a lot of plastic? maybe aluminium is stronger?
Where do you get the g code for all the things you made?
Looks good
Can I get one old 3d printer?😶
If is direct extruder, 5mm retraction seems to high...
Looks solid!
This or Ender 3 s1?
Morning. If you had to choose, other than print size, which is the better but? The Magician X @ $339 or the Rock 3 Pro @ $399. In other words other than print size does the Rock offer anything better for the extra $60? Thanks for both great videos.
The magician series is suppose to have one touch leveling, you click it once and it’s suppose to do everything for you even the z offset however if it works is another question. No knobs on the bottom either it’s a solid plate and it probes it. Build volume is smaller at 230 instead of 320 but they also make bigger magician machines. Right now the magician is $330-$349 usd and the rock 3 pro is $400-$550 usd currently. The rock 3 pro has a better built body and bigger build volume however it does have manual leveling which means more room for error. Any printer can print very well with enough tweaking, I do not really see a difference in print quality but there is a difference in usability and how the machine is built. The magician is weaker but a more intelligent machine and the rock 3 pro is a well built but “old style” printer, but to answer your question I do not see the worth in upgrading as they have a lot of the same specs but ultimately it’s up to you.
What would you use a 3D printer for as I am a newbie surely a 3D is more for industrial use not domestic? Seems complicated to design an item and then print in 3D
Not at all. it's not even a good consumer printer. underbaked features.
Have you tired to print using cura and octoprint It did not woek for me AIR PRINTED
Uh hey,
I have a question: what is for me a good auto leveling 3d printer? I am unable to level a printer but i don't know what i need to use to print items..
Note: i'd like to make parts for like nerf parts and maybe for transformers...
Little bit different story for me. As soon as I hit auto level, the print head lowered, hit the bed and just kept trying to push itself down onto the bed while making a loud grinding noise. It only stopped when I hit the power button. Repeated the steps with the same results. I'm super bummed! I was really hoping that this was the answer to my printing woes.
I had the same exact thing. they swapped my printer out and the new one worked
@@CalebKraftmakes I just did the same thing and it worked!
If only it worked like this I had 2 successfull prints on my one
🥩🦖helpful! You forgot to have a fan in there!
havent seen the video but still comenting for the Algorythm
😂
Unfortunately, living in Australia makes this printer very expensive as in AU$857 shipped form China.
I just set this up and my nozzle is siting before the plate but kinda under it and soon as I hit level the nozzle is forcing it's way on the plate and scratched my bed I did nothing extra just read the instructions I'm just confused as to why my nozzle is not on the bed
Same did you find a solution
@@blazefire8555Make sure that tab on the right side of the z axis is straight and lowering into that slot where the uprights are screwed in
Greetings sir, Please I'm Anthony chating from Nigeria, I want to go into 3D design and printing but don't know how to go about it most especially knowing the best machine product to buy for it.
Please can I get any help or guidance from here
We wish you to use it in good days... We are waiting for good content 🙂🙂🙂🙂
💕🔥👌👍
This printer seems pretty bad I mean look at the prints I think its a mix of bad part cooling and the all plastic frame I def agree with u that they should of used more aluminum it would make it from a ok product to great product
Hi, Dear Sean. The main stressed parts of MINGDA Magixian X are still metal profiles, such as Z-axis gantry, X, Y-axis guide rails, and plastic parts are mainly used for protective shells. Magician X plastic injection parts use excellent glass fiber engineering materials, which are very strong and will not affect product life.
Commenting for the algorithm go brrr
45:54 where do you live where you can't sell a printer?!
Seems ok just really cheap
BS...error..RESET MINT EMP:E1 ????Now what?
preproduction...
Plastic and belts, not for me.
first
Lyer I'm first bro
@Soriahz / Laydn your dad and mom LOL
Seems super cheap
Not if you live in Australia - it will cost you AU$857 shipped from China.
drivers look to be TMC2208-LA
Hi Friend, how can I contact you?
Please come and visit our ongoing campaign: www.kickstarter.com/projects/magicianx/magician-x-fdm-3d-printer-innovator-of-auto-leveling/description?fbclid=IwAR1-onGXZbWogk62JjQLXjp1E1n8oWUM1KPuOOOfHiP0UPYmoVgXKu6cxu8