70lb draw weight, 29” draw length, 445 grain arrow.. 300 fps.. I wanted to make sure I mentioned that! What budget gear are ya’ll interested in? Anyway hope ya enjoyed the video and obviously I’m not Cam but have great respect for him, he’s a G! Have a great week 🤙
As hyper extended as your bow arm is you should really be a 27" or 28" draw length not 29". I cant believe josh hasent forced you to fix that yet boss.
I would like to see a comparison between the Garmin xero A1iPro and the ultraview sight. Tell me WTH ultraview think they can sell a VERY standard sight for over half the price of the greatest sight ever made?!?!
You keep getting better and better! Keep At It! 👏🏽 Try not making the same style videos as everyone else. We’d like to see more of what’s it like from a ENTRY LEVEL archer.
Had the ventum 30 it is a great bow, fast as hell. Then i went and pulled back the VTM34 two seconds later i was swiping my credit card. It's the best bow I've ever touched, went from wanting a phase 4 to buying the VTM and it was a great decision. Love this bow.
I personally like the exact grip on the Hoyt bows I upgraded from my first bow which was a Hoyt Maxxis 31 to a Hoyt Nitrux with a 27 inch draw length and I love it
Hey man, You may have said it in a different video, but I was curious why you switched from the CBE 3v. I was interested to hear more on that sight and any input, maybe any insight on it vs the 2 pin they have that isn’t a dovetail. Love what you do man, straightforward, honest, dependable and humble man 🤙🏼Love watching your channel and hearing your experience!
Vtm 31, easton axis 340, 30" draw 70lbs.. 425 gr @314. Shot through a vow elk quartering toward me at 80 yards with a grim reaper razor tip... pulled the arrow out of the off side rear ham.
Nice video ! Very detailed in the explanations and your set up. I’ve have a Hoyt charger since new it’s 9 years old now and I have the original string on it. And I don’t shoot a whole lot. But. I just try and wax it and take care of the bow. I hope my VTM string doesn’t do this
I like it for simple mounting purpose.. but yeah I’m sure a lot of people would prefer the flexibility of being able to adjust.. I always keep my hunting bows close to the riser tho
You or Josh should do a review on the Carter Two Shot- there is little to no information out there on such a great release. IMO it is one of the cleanest breaking wrist straps on the market.
I know it it however everyone prefers. But, it aggravates me to see people use 2 stabilizers on these bows. The new design allows for a shorter stabilizer with equivalent stabilization of a long one. Try a 10” only in the lower hole Timmy!! Keep it up!
Pause it at 2:17. There is a stubby under the main one. Hoyt designed that lower part of the riser to stick out more so you don’t have to use as long of a stabilizer. I.e. 10” vs 15”.
@@archeryelkhunter the stubby is not considered a stabilizer it's for vibration when I was shooting Hoyt I had the vibration thing on the top and I had a 15 inch bar on the bottom
However he wants to do it is fine. However, go back and watch the video about this bows design from Hoyt. They explain it like I did. If it was me, I would shoot a 10-12” AAE Mountain with the Hoyt quick attach go sticks in the bottom hole. Thats my preference.
Hey, first of all I like all your videos on all channels! No matter whether you have it, on Podium Archer or on ElkShape. You're a pretty cool guy! And knowing what you are spreading is really awesome! I have to ask a question now. The sunglasses you have, what brand are they? I would like there to be more archery stores in Germany like yours. Unfortunately, most of the things are only available from you in America.
Hoyt defiantly needs a stronger quiver. The top housing busted on mine from a stick chasing bulls this year. Only complaint I’ve had two seasons running the ventum pro also the stock strings as well. Mine looks like trash.
I like the fact you have a relaxed release hand with the fingers just hanging around. So many FAN OUT the fingers which has to create muscle tension? QUESTION- are you making the shot break or are you truly pulling thru until it breaks. When I use my old quickie plus ( backup) I just can not make myself command a break. I have to pull thru ( while totally focusing down range) or I feel I have failed proper form. And just pulled off the ol’ Gillingham COMMAND. lol Another great video Tim. 👍👍
@@TimConnor13 what I've been taught is for every ounce you put on your front bar you need to put 2-3 ounces on the back one. Now that's just a guide line. My reckoning 35 likes 6 in the front 4 in the back.
Tim, the title of this is pretty misleading, clearly that's Cam's Bow model, but certainly not his set up. Thanks for the great content, congratulations on the buck.
One of the points of the picatinny rail, moving the weight more towards the center, was completely missed by Ultraview. That sight hangs off the side of the bow even more than "normal" sights do.
What pin are you using as your floater on the UV Slider? Also, I pulled the trigger on one and it broke within 5 days…. Waiting on UV to return my email to get it fixed.
I believe Hoyt only offered that color on their 2023 line. I know there are some available on eBay for both the VTM 31 and VTM 34. I’ve also seen them available both new and used on other sites as well. I just bought a brand new VTM 31 in the battle worn finish off of eBay.
whats going on at 6:35?? The arrow disappears...also the moose looks closer than 84 yards...I dont think hes lying or anything, just a weird perspective i guess, idk is it just me?
Im surprised josh hasnt critiqued your dl. If thats 29 your probably 27.5 maybe 28 to get that arrow between your bottom lip and bottom of chin. But if your repeatable the way your set up now thats what matters. Its worth trying out though, you may get some more forgiveness and steadier hold
I’m amazed people hunting actually run long ass stabilizer and back bars. Jesus Christ it’s hunting not punching rings in 3D or target archery. I would shoot a bare bow before hauling a bow to the field with those long ass bars…
70lb draw weight, 29” draw length, 445 grain arrow.. 300 fps.. I wanted to make sure I mentioned that!
What budget gear are ya’ll interested in? Anyway hope ya enjoyed the video and obviously I’m not Cam but have great respect for him, he’s a G!
Have a great week 🤙
As hyper extended as your bow arm is you should really be a 27" or 28" draw length not 29". I cant believe josh hasent forced you to fix that yet boss.
Do a review on the Carter Two Shot!
I would like to see a comparison between the Garmin xero A1iPro and the ultraview sight.
Tell me WTH ultraview think they can sell a VERY standard sight for over half the price of the greatest sight ever made?!?!
Heard Tim can do 100 pushups in 20 minutes
How did you get the battle worn. I looked and didn’t see it
I love that every opening to the archery shop/range is always in the truck with the pooch and getting a coffee.
You keep getting better and better! Keep At It! 👏🏽
Try not making the same style videos as everyone else. We’d like to see more of what’s it like from a ENTRY LEVEL archer.
Had the ventum 30 it is a great bow, fast as hell. Then i went and pulled back the VTM34 two seconds later i was swiping my credit card. It's the best bow I've ever touched, went from wanting a phase 4 to buying the VTM and it was a great decision. Love this bow.
I personally like the exact grip on the Hoyt bows I upgraded from my first bow which was a Hoyt Maxxis 31 to a Hoyt Nitrux with a 27 inch draw length and I love it
Bought a VTM31 this year, and have been super impressed by it. The 80# limb option and the speeds it produced were well worth the price tag
Yeah cams and speeds are really good!
Thats the one thing i really like about the hoyt, is the grip.
No top brand factory bow comes with good strings, which is frustrating since you’re paying so much for the dang thing. I can agree with you on that
I take the grip off and serve on paracord, ive done that on all my hoyts for the past few years, makes an awesome grip.!
Hey man,
You may have said it in a different video, but I was curious why you switched from the CBE 3v. I was interested to hear more on that sight and any input, maybe any insight on it vs the 2 pin they have that isn’t a dovetail.
Love what you do man, straightforward, honest, dependable and humble man 🤙🏼Love watching your channel and hearing your experience!
That cbe is a great sight.. I hunted Nevada with it ✊
very nice bow review and i really liked that you got another bow technician's opinion.. i must say i really like that finish as well. great video
I think you found your sweet spot... you're shooting that VTM with a wrist strap really nice
I agree with the stings. I got a hoyt and the stings will hopefully get me through season. January I'll be putting on new strings.
Yeah longevity isn’t their strong suit.. although mine didn’t twist or anything
Vtm 31, easton axis 340, 30" draw 70lbs.. 425 gr @314. Shot through a vow elk quartering toward me at 80 yards with a grim reaper razor tip... pulled the arrow out of the off side rear ham.
Nice video ! Very detailed in the explanations and your set up. I’ve have a Hoyt charger since new it’s 9 years old now and I have the original string on it. And I don’t shoot a whole lot. But. I just try and wax it and take care of the bow. I hope my VTM string doesn’t do this
My rx7 ultra strings were the same after about 6 months. Just put a new set of custom string and cables on it.
Great channel 👍👍
Really like how this one is filmed.
Pretty sure the VTM comes with those sunglasses.
Once in a while, check the torque head screws on your modules. They tend to loosen up one bow had one lose other bowl lost one.
Thank you for the heads up
If you can pull it why not I have my phase 4 at 76lbs and a shot a 452g arrow 28in drew and get 290+fps and love it
Nice review TC. Any thoughts on the picatinny mount & not being able to adjust the sight closer or farther from the riser.
I like it for simple mounting purpose.. but yeah I’m sure a lot of people would prefer the flexibility of being able to adjust.. I always keep my hunting bows close to the riser tho
Hey, bud. Love the content. Noticed that you pull your face off the string immediately at the shot to watch your arrow fly.
You or Josh should do a review on the Carter Two Shot- there is little to no information out there on such a great release. IMO it is one of the cleanest breaking wrist straps on the market.
I know it it however everyone prefers. But, it aggravates me to see people use 2 stabilizers on these bows. The new design allows for a shorter stabilizer with equivalent stabilization of a long one. Try a 10” only in the lower hole Timmy!! Keep it up!
2 stabilizers ? He has a front and a back bar
Pause it at 2:17. There is a stubby under the main one. Hoyt designed that lower part of the riser to stick out more so you don’t have to use as long of a stabilizer. I.e. 10” vs 15”.
@@archeryelkhunter the stubby is not considered a stabilizer it's for vibration when I was shooting Hoyt I had the vibration thing on the top and I had a 15 inch bar on the bottom
However he wants to do it is fine. However, go back and watch the video about this bows design from Hoyt. They explain it like I did. If it was me, I would shoot a 10-12” AAE Mountain with the Hoyt quick attach go sticks in the bottom hole. Thats my preference.
Hey, first of all I like all your videos on all channels! No matter whether you have it, on Podium Archer or on ElkShape. You're a pretty cool guy! And knowing what you are spreading is really awesome! I have to ask a question now. The sunglasses you have, what brand are they? I would like there to be more archery stores in Germany like yours. Unfortunately, most of the things are only available from you in America.
509 sunglasses
They only thing on that bow cam Hanes shoots is the quiver? And really like his bow in any way
Hoyt defiantly needs a stronger quiver. The top housing busted on mine from a stick chasing bulls this year. Only complaint I’ve had two seasons running the ventum pro also the stock strings as well. Mine looks like trash.
Word!
Best axle to axle for any manufacturer.
34" The best
YESSS PLEASE CHANGE THE GRIP!!!!! Love the new texture but hate the shape,, Pulled mine off too,,and I gave it a good chance before I did,,
I like the fact you have a relaxed release hand with the fingers just hanging around. So many FAN OUT the fingers which has to create muscle tension? QUESTION- are you making the shot break or are you truly pulling thru until it breaks. When I use my old quickie plus ( backup) I just can not make myself command a break. I have to pull thru ( while totally focusing down range) or I feel I have failed proper form. And just pulled off the ol’ Gillingham COMMAND. lol Another great video Tim. 👍👍
It’s a surprise shot.. you can tell by watching my eyes blink (a little key I learned from Joel turner)
Hey Tim what do you do other than RUclips always wondered since I’ve been watching you for a few months?
I coach golf and own my golf academy! I always hope to do more golf stuff on the internet
@@TimConnor13 nice I haven’t been to the driving range in a while but sure would love to re visit the sport!
Great Video Tim, what bino harnes are you using there and do you like it?
Tim, if you add more weight to your back bar you won't need to kick it off as much
10 4.. trying to keep this bow light but I like where your heads at
@@TimConnor13 what I've been taught is for every ounce you put on your front bar you need to put 2-3 ounces on the back one. Now that's just a guide line. My reckoning 35 likes 6 in the front 4 in the back.
Tim, the title of this is pretty misleading, clearly that's Cam's Bow model, but certainly not his set up. Thanks for the great content, congratulations on the buck.
Do you shoot better with that bow than your Reckoning? Just watching you and MFJJ, I thought you were shooting it pretty good!
Very nice bow, I really like the finish onit! What release are you shooting?
Never heard anyone complain about a Hoyt grip before?
Buy a prime. Stability is truly engineered into the bow. You can keep your bow light weight because you don't need all them stabilizers
Try some threadz custom bow strings they’re great
How thick approx is that grip.. I am a 31-3/8" draw length and being this bow only goes to 31" .. Its got me wondering !
Probably very close for you, worth a try
One of the points of the picatinny rail, moving the weight more towards the center, was completely missed by Ultraview. That sight hangs off the side of the bow even more than "normal" sights do.
I Wonder what's worse balance wise...that or my Triple stack on a dove
@@spencerontheinternetI hated the triple stack it was so heavy
Great video as always. What brand sunglasses?
509 actually.. only spot I could find open on the day was an atv dealership.. glasses seem good tho
Great video
You gotta wax your string Tim haha
Are you shooting a lens with you UV?
Not this setup.. my target setup yes
What pin are you using as your floater on the UV Slider? Also, I pulled the trigger on one and it broke within 5 days…. Waiting on UV to return my email to get it fixed.
Top pin.. but all three slide. I prefer to use top pin until I have to use bottom.. what happens to your slider?
Those silver bearings on the inside of the scope that attach to the rack fell out.
I wanted to love the vtm but soon as I held it, I hated it. Felt just like my old Mathews v3 31, which I hated even more.
Super
How did you get the battle worn? Not seeing it in website.
I believe Hoyt only offered that color on their 2023 line. I know there are some available on eBay for both the VTM 31 and VTM 34. I’ve also seen them available both new and used on other sites as well. I just bought a brand new VTM 31 in the battle worn finish off of eBay.
whats going on at 6:35?? The arrow disappears...also the moose looks closer than 84 yards...I dont think hes lying or anything, just a weird perspective i guess, idk is it just me?
arrow must just be going too fast, and be too far away...
You’ve gotta a lot of work ahead of you to be Cam! 😂
I don’t hope to be Cam, but have a massive amount of respect for him! He’s a G ✊
@@TimConnor13 you keep doin you! You’re doing fine!
Need more stabilizers to be cam
Ol peek master
Im surprised josh hasnt critiqued your dl. If thats 29 your probably 27.5 maybe 28 to get that arrow between your bottom lip and bottom of chin. But if your repeatable the way your set up now thats what matters. Its worth trying out though, you may get some more forgiveness and steadier hold
I agree with the repeatable and forgiveness but the high anchor point is usually a result of wanting to extend shooting distance.
@kylewilliams6453 what you mean by high?
Totally not Cam Haynes but, good stuff.
I think you're missing something here
@@KosherDylspot on ✊
Damn,I must have missed where Tim claimed he was Cam!
The only difference is that I dont think you could pull Cams bow back.
Nobody has Cam’s bow. His bow is specially built by Hoyt 95lbs. We normal humans can only dream…
The 95 lb hammer 🔨
And cam has the worst draw out of any professional archer. Facts.
I sent him a message about the title of this, that's definitely not Cam's set up.
Isnt it 90. Last time he checked his weight. It was only like 86??
@@wcwcgarner2717not really , he still keeps his draw elbow up even with 90+lbs DW
I’m amazed people hunting actually run long ass stabilizer and back bars. Jesus Christ it’s hunting not punching rings in 3D or target archery. I would shoot a bare bow before hauling a bow to the field with those long ass bars…
Lift weights, talk less, Broseph.