Short and informative video for using gold foil decals. I like videos that are not to long, so I can get the information I need and on to the project faster. Thank you for your consideration of our time and the hard work you put into the videos.
To cut foils I use the card stock or light card stock option and it cuts beautifully through my metallics. I do wish circuit would include the cut tule on the wrappers, that’ll eliminate sooo many trial and errors.
Lovely outcome! I really enjoy your videography, I can't imagine how long it takes to go from idea to upload. I have a Cricut machine as well and while I think this machine works beautifully, I cannot recommend the software that is necessary to use it with. Watching you having to piece back together your beautiful font brings back bad memories ha. I've seen a couple of your foiling videos and was curious, What would you say is the most time efficient way of foiling for you? Is it also your favorite method?
Thank you ☺️ Completely agree about the software. It should do more instead of needing outsourcing software like illustrator and Inkscape. The most efficient way of foiling would be using a heat applicator such as the foil minc. It is much faster than the other methods however I love the designing that goes into using the foil quill. And the results are much better and look very similar to a vintage hot foil press machine. 💕
Are you using the adhesive foil as your material in the material settings? One of my first projects was a very very intricate projects with tiny tiny cuts and I used hollagraphic vinyl and I was okay then I used the adhesive foil and again it weeded fine, and tiny tiny pieces. But I had a terrible time months later by not paying attention and didn't hit that I was using glitter vinyl and it was a nightmare but I didn't dream they had so many that tricked you into thinking, yes that's it when gotta make certain it's the absolute same material.
Wow I just read that and it confused me and I wrote it, I didn't hit glitter vinyl and had a time and I use the foil and haven't really had issue, I see a question about the card to transfer to, I can't help I don't understand. I'll say this adhesive foil will go into transfer tape them on to your item you're preparing for vinyl on.
is there a way to foil on the inside of the acrylic, so the gold face is stuck to the face. I am looking at buying a cricut maker for a project i am building.
You made this look way easy lol i swear, every time i start a cricut project, it goes haywire from the get go. my vinyl almost always NEVER goes according to plan. it gets so frustrating
What setting do you use? I’ve switching mine to custom and adhesive foil but it’s still so difficult to weed it ruins my project. I’ve gone through 3-4 sheets already. 😭 I am making signs and table numbers for my wedding
HELP? I am doing something similiar for my friends wedding but I'm doing about 70 coasters. Some details are quite fine so I like to clean and check the blade between each one. I currenlty have it set up to cut multiples on my long mat and it thinks each one is a different material so it pauses between each one and I 'reload' the mat and check the blade. If i don't set it as multiple materials it cuts small bits from every coaster at the same time so if i have to pause it to clean the blade i can't then relaod or all of them would be slightly outalinged. I want it to cut one at the time but cut them all without pausing to "reload" unless i have to pause it and clean the blade. That way only 1 would be ruined instead of all. Do you know if there's a way? I can't find anything on forums or in google search.
What transfer tape do you use? I have the same Adhesive Foil in Champagne by cricut and don’t know whether to just go with cricuts regular transfer tape or stronggrip.
If you use strong grip since it’s got glitter, I’d stick it to my short or pants a few times. It’s soooooo strong that you’ll find without adding fuzz to it? You’ll be peeling so hard trying to remove the tape.
I use freezer paper in acts the same way as cost-efficient it last longer because there's more in the pack and you can get it at your local grocer some Dollar Trees may even sell it
It's a thick foil, I don't want to sound condescending it's not my intention, but vinyl is just a different material and you can't really tell any difference except that it's very thin, and you can't just throw it onto say the outside of a windshield. Hope that helps you.
Hello... on 1 role (12x48") you can make 24 - 4x6" sized signs. If you wanted to save foil and condense/separate the "share the love" and hashtag sections, you could get 35 on one role. Hope that helps :)
I have looked through all the questions and answers, but I still don't see what the type of paper being foiled on is. The paper that the foil is being weeded on, not the transfer tape or the acrylic card it is finally placed on. What is the paper on the mat that the foil paper is covering and transferred on. That is not in the description. Is it clear vinyl?
It's just the adhesive gold foil there is no paper under it. The white "paper" that your seeing is just the backing that comes with the foil like that backing on most stickers. Once you remove the front of the excess foil you use the transfer tape to take it off the backing.
What do you mean last long there invitations do you think people keep invitation people throw them away. I don't think Ricky would make anything that's going to last for like 3 days
How do you cut small text on an explore air 2? i've been having so much trouble with that! Im not sure if it is the vinyl thickness or just the machine settings. Ive tried all of them
LOL. How much would each invitation cost me? A foil for every one and all that time who does it do to go crazy? The foil transfers with any tip even by hand. Up close it looks very ugly.
Short and informative video for using gold foil decals. I like videos that are not to long, so I can get the information I need and on to the project faster. Thank you for your consideration of our time and the hard work you put into the videos.
شكرًا
Perfect. Just what I need for my next project
Brilliant 👍 Just loved it ❤ Thank you 👏
To cut foils I use the card stock or light card stock option and it cuts beautifully through my metallics. I do wish circuit would include the cut tule on the wrappers, that’ll eliminate sooo many trial and errors.
Hi, which cricut blade was used for cutting the foil? Thank you
Awesome video, thank you so much
incredible upload Eternal Stationery. I broke that thumbs up on your video. Continue to keep up the superior work.
this looks lovely
Is there a difference between this adhesive foil and just regular vinyl?
Salut j'aime trop ce que tu fais c'est waouh❤
Amazing video! Thank you for sharing💖
this is just what i needed!! thank you so much!!!
Do you know what app she's using?
@@richardphilip2967 crictut desing space
Very lovely
how do you cut it with the same tip of the machine or with another tip?
hi, can you tell me what type of clear sticker that you pasted on the top of gold sticker?minutes 3:07...tq
Beautiful! Thank you ❤️💯🙏🏾
Lovely outcome! I really enjoy your videography, I can't imagine how long it takes to go from idea to upload. I have a Cricut machine as well and while I think this machine works beautifully, I cannot recommend the software that is necessary to use it with. Watching you having to piece back together your beautiful font brings back bad memories ha. I've seen a couple of your foiling videos and was curious, What would you say is the most time efficient way of foiling for you? Is it also your favorite method?
Thank you ☺️
Completely agree about the software. It should do more instead of needing outsourcing software like illustrator and Inkscape.
The most efficient way of foiling would be using a heat applicator such as the foil minc. It is much faster than the other methods however I love the designing that goes into using the foil quill. And the results are much better and look very similar to a vintage hot foil press machine. 💕
So pretty. Do you recommend cleaning the acrylic with alcohol before applying the adhesive foil?
Yes, every time - acrylic attracts dust
Straight to the point I love it.
What blade did you used to cut yr foil decal
Nice job 👍, is the gold foil a permanent adhesive ?
What settings did you choose when cutting? I always have a difficult time with wedding cricuts adhesive foil. Thank you
Are you using the adhesive foil as your material in the material settings? One of my first projects was a very very intricate projects with tiny tiny cuts and I used hollagraphic vinyl and I was okay then I used the adhesive foil and again it weeded fine, and tiny tiny pieces. But I had a terrible time months later by not paying attention and didn't hit that I was using glitter vinyl and it was a nightmare but I didn't dream they had so many that tricked you into thinking, yes that's it when gotta make certain it's the absolute same material.
What is the name of that transparent card transferred the foil to?
Wow I just read that and it confused me and I wrote it, I didn't hit glitter vinyl and had a time and I use the foil and haven't really had issue, I see a question about the card to transfer to, I can't help I don't understand. I'll say this adhesive foil will go into transfer tape them on to your item you're preparing for vinyl on.
@@Abena5012i wish the tutor will let me know the name of the transfer card too
Transparent card name pls
Thank you so much
Hi can this be done with a cricut joy?
is there a way to foil on the inside of the acrylic, so the gold face is stuck to the face. I am looking at buying a cricut maker for a project i am building.
Unfortunately not, the gold foil is on the top side (not the sticky side)
Hi..can i know what blade u use? Can fine blace cut thru foil?
Beautiful.. can u please tell me the name of the gold paper
You made this look way easy lol i swear, every time i start a cricut project, it goes haywire from the get go. my vinyl almost always NEVER goes according to plan. it gets so frustrating
Great tutorial. What is the material used to transfer the foil to acrylic?
It’s transfer tape
What is the name of the transparent card you transferred the foil unto?
It’s in the description
Can this work on plastic surface?
Where do you purchase the acrylic?
Iwiller Henson try your local hardware store like Home Depot or Lowe’s
Amazon
Love this!!! ❤️
What program have u used ?
Is it washable?
What setting do you use? I’ve switching mine to custom and adhesive foil but it’s still so difficult to weed it ruins my project. I’ve gone through 3-4 sheets already. 😭 I am making signs and table numbers for my wedding
To cut foils I use the card stock or light card stock option and it cuts beautifully through my metallics.
I use light card stock… Works every time! 😀
HELP? I am doing something similiar for my friends wedding but I'm doing about 70 coasters. Some details are quite fine so I like to clean and check the blade between each one. I currenlty have it set up to cut multiples on my long mat and it thinks each one is a different material so it pauses between each one and I 'reload' the mat and check the blade. If i don't set it as multiple materials it cuts small bits from every coaster at the same time so if i have to pause it to clean the blade i can't then relaod or all of them would be slightly outalinged. I want it to cut one at the time but cut them all without pausing to "reload" unless i have to pause it and clean the blade. That way only 1 would be ruined instead of all. Do you know if there's a way? I can't find anything on forums or in google search.
What is the machine that you are using?
Your videography is fantastic! Love your work! Where can I purchase Acrylic pieces from in Melbourne, Australia?
What transfer tape do you use? I have the same Adhesive Foil in Champagne by cricut and don’t know whether to just go with cricuts regular transfer tape or stronggrip.
If you use strong grip since it’s got glitter, I’d stick it to my short or pants a few times. It’s soooooo strong that you’ll find without adding fuzz to it? You’ll be peeling so hard trying to remove the tape.
@@ShanieeMonae314 I actually did end up just buying strong grip and it works perfectly! Thank you!
I use freezer paper in acts the same way as cost-efficient it last longer because there's more in the pack and you can get it at your local grocer some Dollar Trees may even sell it
Can you say the name of app to print the letters,what the name of all papers used on video and what size acrylic is that?
Hello, new subscriber. Can this be done with a silhouette cameo machine . Tfs
What setting did you use to cut this ? My foil is always so difficult to weed
To cut foils I use the card stock or light card stock option and it cuts beautifully through my metallics.
hola puede servir con alguna cameo?
Whats the kind of paper that was used??
How do you get those fonts?
Where do you edit?
wow, haven't set my cricut maker yet buts its only for me to use for chocolate wrappers
What foil do you use?
I can't seem to find the products you are using on your Amazon list. What are the transparent cards you are using to put the foil on and then stick?
It’s in her description
what's the printer u used?
Which printer is that
I struggle sooo much with this material, I’ve changed settings and added more pressure and nothing 😩
@Eternal Stationery hello thank you for this beautiful and good video please say how to call this sheet and then I find some me who am in africa
Hello, is this technique also suited for personalized plastic treat bags (party favors)?
How did you not get any air bubbles 😲
Thanku soo much for video. Am new subscriber dear. May i know after cutting gold foil what sticker paper is that? Name pls
Transfer tape
What is the clear sheet called? The one the gold foil stuck to at the end? Thanks
Transfer tape
It’s acrylic. You can find it at home depot or lowe’s
bello
Can someone tell what is the difference between vinyl and adhesive foil, please?
It's a thick foil, I don't want to sound condescending it's not my intention, but vinyl is just a different material and you can't really tell any difference except that it's very thin, and you can't just throw it onto say the outside of a windshield. Hope that helps you.
Where i could get the acrylic.?
Amazon! You can get a pack of 10 5x7 for 17.00 or 20 for like 22.00
What app uses is this ?
Hello what cricut machine did you use?
Explore air 2
Can I add arabic writing?? Like from google images? Is there a way. I really want to buy a machine.
hi, i cant found the font (beautiful bloom).. it is possible ? it has another name ?
Find another one do you need you don't necessarily need to use the one she has
Hi! How many of these can you get done with one role? I need to make 30.
Hello... on 1 role (12x48") you can make 24 - 4x6" sized signs. If you wanted to save foil and condense/separate the "share the love" and hashtag sections, you could get 35 on one role. Hope that helps :)
@@EternalStationeryMelbourne omg! Thank you!!!!!!!!!!
I have looked through all the questions and answers, but I still don't see what the type of paper being foiled on is. The paper that the foil is being weeded on, not the transfer tape or the acrylic card it is finally placed on. What is the paper on the mat that the foil paper is covering and transferred on. That is not in the description. Is it clear vinyl?
It's just the adhesive gold foil there is no paper under it. The white "paper" that your seeing is just the backing that comes with the foil like that backing on most stickers. Once you remove the front of the excess foil you use the transfer tape to take it off the backing.
👍
What font is this?
Did you use any foil tool for this or just used normal blade?
seconded! I would also like to know which blade was used! Thanks in advance!
Hi, Great video. Will the gold decal last long? Thinking of doing them as A5 invitations.
What do you mean last long there invitations do you think people keep invitation people throw them away. I don't think Ricky would make anything that's going to last for like 3 days
What kind of app is that?
Cricut design space
How do you cut small text on an explore air 2? i've been having so much trouble with that! Im not sure if it is the vinyl thickness or just the machine settings. Ive tried all of them
I have the same problem
Try the washi tape setting. Helps me alot with cutting small text. I also use the deep cut blade with that setting x
Where did you purchase the acrylic sheets from?
Amazon
What app
Isn't this not vinyl ???
LOL. How much would each invitation cost me? A foil for every one and all that time who does it do to go crazy? The foil transfers with any tip even by hand. Up close it looks very ugly.
Its not foiling...its just cut gold foiled vnyle..
Lol so basically you need that expensive machine to do this
It's only expensive when you think it's expensive if you use it properly and with wisdom you'll make your money back in less than 3 days
What machine is that?
What is the name of the transparent card you transferred the foil unto?
It's called acrylic sheet. It was said it in the video.
What settings do you cut on ?
What is this app?
Which machine did You used