Nomad Sculpt to 3D Print: Step by Step Walkthrough
HTML-код
- Опубликовано: 12 сен 2024
- Part 1: Character Design Tutorial
skl.sh/3uccUD2 (Skillshare)
Part 2: Send STL Files to Lychee Slicer
• Preparing a Nomad Scul...
Part 3: Transfer Sliced Files to Anycubic 3D Printer
• Exporting a Nomad Scul...
Part 4: Printing Results (Anycubic Photon M3 Premium)
• Nomad Sculpt to 3D Pri...
After Modeling in Nomad Sculpt and sending the STL file to Lychee Slicer, the files are now ready for the 3D Printer: @ANYCUBIC3D Anycubic Photon M3 Premium. This is my setup and print start. The next video will be after printing has completed....and the real dirty work begins. Enjoy!
#nomadsculpt #tutorial #3dmodeling
Application: Nomad Sculpt / Device: iPad Pro 2022
(Blender Renders will have BLENDER logo on them)
2D & 3D Skillshare Tutorials:
drugfreedave.com
Nomad Sculpt Cheat Sheet • Nomad Sculpt Cheat She...
(ROUND EDGE, SMOOTH COLOR)
Updated BEGINNER Tutorial: • Nomad Sculpt Crash Cou...
3D Environment: drugfreedave.gu...
Round Edge Brush (3D): • Nomad Sculpt Quick Tut...
Free Beginner Tutorial: • Nomad Sculpt 1.76 - Ab...
How to UV Bake: • Nomad Sculpt Tutorial:...
Lower Poly Count: • How to Lower Poly Coun...
Add Environment: • How to add an Environm...
How to BLEND Smoothly: • Nomad Sculpt 1.75 Smoo...
How to LIGHT your scene: • Nomad Sculpt 1.74 Ligh...
Instagram:
/ drugfreedave
TikTok:
/ drugfreedave
Support:
paypalme/davereedart ❤️
www.buymeacoff... (Pancakes 🥞)
DRAWING & TUTORIAL EQUIPMENT (Affiliate links)
Ipad Pro 2021 12.9in: amzn.to/2X8mAOw
Procreate App - procreate.art/...
Apple Pencil 2 Tips: amzn.to/3IOMDwy
Apple Pencil 2 Grip: amzn.to/3udDwkT
Apple Pencil 2 Full Length Grip: amzn.to/3AKJiM6
Sketchboard Pro: sketchboardpro...
VIDEO
Iphone 13 Pro: amzn.to/3gc8vp6
Smallrig Arm & Clamp: amzn.to/3z4xLqL
Overhead Recording Mount: amzn.to/3iYJCPH
Apple HDMI Dongle: amzn.to/3IR8qDC
Elgato Camlink Capture Card: amzn.to/3s68clg
Macbook Pro 14in M1: amzn.to/3AIaoUa
Sony a7iv Full Sensor Camera: amzn.to/3TMd7We
Tamron 17-28mm Wide Lens: amzn.to/3TI4pIh
Sony Bluetooth Grip/Tripod (GP-VPT2BT) amzn.to/40B5pjM
Ulanzi Arm Clamp: amzn.to/40zbHAl
Ulanzi RGB Light (With diffuser): amzn.to/40epA7p
G1S RGB Light: amzn.to/42C8LVw
Neewer Lights: amzn.to/42GLnX2
Neewer Diffuser: amzn.to/40EeOY1
Canon M50 mark ii: amzn.to/3V8P9Dl (with sigma Lens)
Sigma 16mm 1.4 canon ef-m: amzn.to/3BMJRa6
BenQ SW321C 32: amzn.to/3jiiJt7
AUDIO
Rode VideoMic NTG (with Canon M50 mark ii)
Rode NT-USB Mini: amzn.to/3oewk47
Please leave a comment below and let me know what you think!
Thanks for watching the video, and for your support!
Because you’re in a small room I do recommend an Air Purifier, they work really well
Thank you for showing your setup! very insightful how you have everything covered and the note on the smell.
You've got a nice home man, I believe you'll get a studio in no time. Keep up the good stuff, you are my no 1 guide for nomad sculpt, thank you.
As always, a source of inspiration. These small but huge details are so important. Thanks a lot for sharing. I still have my printer holding and awaiting for my courage to start using it! :)
It’s a long and messy road , but I hope my mistakes help others not make the same ones… or at least how to get over the hurdles. At some point you just have to take the plunge!! 🙌🏾😁
Hi! Thanks for sharing the process. Did you take a look at Carbon Air purifier, I know Anycubic and Elegoo sell small one bit also bigger unit.
And you should use safety glasses too, having resin in your eyes is even more worse than on your arms skins.
The master of Nomad!
Check out growing tents for a great enclosure for the printer. They come in tons of sizes and often seal great and block out all light. As they are designed to keep the humidity and light controlled for plants.
I have my Elegoo Saturn 2 inside a grow tent and have a bathroom extractor fan pulling the fumes out the window. Quick tip don't use the plastic scraper to stir resin as it can scratch and damage the fep. Use a soft silicon cooking spatula. There is also a file you can print which causes the resin to mix. so you don't even need to stir it up ;-)
I use Elegoo plant based low smell resin which you don't really smell it and IPA 99% gives me a bad headache so I use denatured alcohol which dont smell so bad.
Love your vids man! You could cut a hole in to the cover and put an exhaust hose out the window. Ive helped a few friends make them and helps a ton with the smell.
Dave you in law school ? Nice. Former 3d game character artist. 10 years, activision, thq, lucasarts, etc. Now workers comp attorney myself. I still draw/paint/3d model.
Thank you Dave
I highly recommend you get a silicone mat just in case you have spills
Thank you for this vid I was struggling with my layout and they sent me fans to keep inside the printer. I have a elegoo mars 2P definitely needed this tutorial my first time through
Is there any other fills that will do other than resin?
Thank you for sharing 🥰I have a question. When sculpting a 3D character for printing, how can we know if it can stand still on its feet without fall down, especially when the character posing some kind of action?
Trial and error I suppose. I never know if they’ll stand, but I try to create a balanced character when sculpting (by feel) or I make a tail or some sort of bracing characteristic that will help it stand 👍🏾
@@drugfreedave thank you 🥰
I don't think anyone ever plugged on usb drives on the first attempt
You have the space outside get a small wooden shed and print there, you can also try a $80 ionizer for your room, this stuff is toxic
Hey can you print my 3d model ? I'll pay the required amount to you
You gotta start printing your models! 👍🏾
@@drugfreedave didn't get you... I asked you if you can help me print my 3d models with your printer where I'll pay you the amount