2017 XT250 Mods
HTML-код
- Опубликовано: 8 янв 2018
- A quick recap of work completed. Links Below.
integrated Signal Taillight - www.ebay.com/itm/12V-Motorcyc...
Better Tail Light - shop.12oclocklabs.com/index.ph...
Tail Light Upgrade board for integrated signals - shop.12oclocklabs.com/index.ph...
Front Signals & Fixed Rate Flasher - shop.12oclocklabs.com/index.ph...
Handguards/Mirrors - www.highwaydirtbikes.com/
Rear Spring - Hyperco 2.250" ID x 8" Long 600 lb Blue Coil-Over Spring P/N 188A0600 - bfy.tw/HxyO
Rear Spring Collars from Ractech - www.racetech.com - SPSC B5855N, SPSC B5552N, and SPSC B5649
Front Fork Springs - Progressive Suspension #11-1128 - lmgtfy.com/?q=Progressive+Susp...
Progressive Spring Rate Chart = www.progressivesuspension.com...
I went a slightly different route.. Lowering link ( one inch ) oversize foot pegs, 14T counter shaft sprocket, skid plate, bar risers ( 1.5 inches ) drilled and tapped the fork caps to accept Schroeder valves to make air forks and took off around 5 lbs of unnecessary weight. Rear spring just fine for a 175 pounder.
Biggest bang for the buck was definitely the 14T sprocket.. and they make a 13T as well.
2019 Bought new in June. XT 250 by Yamaha. So far pleased. I don't plan taken on road at my age.
Thank you
From Los Angeles
Looking at one of those myself @66. NO onroad riding in HelL.A.? Smart man.
Sounds pretty cool. I’ll be looking for other videos from you.
just looped my xt250 and I need a new taillight thank you for the suggestion, will be using this
Check out the links in the description. If you keep separate turn signals then the cheap eBay one is fine. It can be wired for just a brake light or with integrated signals. I feel that the LEDs are too dim for the orange Signal. I ended up getting the 12oClock labs signal with the integrated signal upgrade board. I used the mount that came with the cheap eBay one. It's Amazing!...but $$$.
Love the look I have an XT also and you have inspired me
14T sprocket will make a huge difference in perceived power/torque. And you won't lose any top end especially on level or slightly uphill where you will probably see an increase in top speed.
Hi Mr. Blue. Love Bill!! I’ve been shopping for an XT. Looking at your bike, it’s good to see that you can fit a decent Knobby under the little front fender.
That was one of my biggest concerns. Is it an odd size or are they pretty standard? I love those fold away mirrors.
I'm hoping the 14T sprocket will work out, mine didn't arrive yet. The wide ratio box isn't made for hill climbing, seems in between gears right when you need it.
Great job, you took a nice bike and made it freaking amazing. Beautiful bike bro
I saw some one in the comments talking about a big bore kit for a raptor. I'm curious if I can do that to a 2017 xt250 and what kind of power I'd be getting out of the extra CCs. What kind of gearing ratio would I be looking at with a big bore? Thanks for any input. Cheers!
How hard was it to install the power commander? I"ve got a 2015 xt250, but I've heard that the power commanders are for the European tune/version of the XT250. Not sure if that is true so I've been hesitant to buy one. What kind of improvements did you notice or feel?
Where did you get the spring from for the rear shock
Hey I’ve been looking for a power commander for my XT 250 year 2020 which one do you have because they say they don’t make one for that bike if you ask him if he can get back to me at appreciate it
How’s your back fender with the exhaust I hear it melt it, and also if I get a sling for the back do I have to get one for the front or can I just do the back
Can I get a link for your handlebars please? I've looked for the Protaper KTM/Husky stock bend that you commented they were but can't find them. I found KTM/Suzuki stock bend protapers. Thanks.
Tell me about your motorcycle lift, please.
Where did you get a power commander? Been looking for one for a while. I can't find them anywhere. Where did you get your 14t gear ? Thanks man !
Only front 14T I found was Fritz Co Inc JP doesn't have them nor anywhere else I looked. They also make a 13T if you like.
Bill... Haha, awesome. Love the bike, good video... Just here trying to decide between the xt250 or the wr200
WR250r or TW200?
Yes, my bad... xt250 or TW200.. I could probably utilize both very well, but need to pick 1.
Also getting a ttr110 for my son, but I'm pretty sure I'll be going with the TW 200, trails around here aren't friendly.
Xt250
Can you shed some light (no pun intended) on the install of light toggle switch...part, difficulty, how to, etc? Thanks!
Followed this guy's lead... ruclips.net/video/r3MAMs-pQPs/видео.html&list=WL&index=3
@Xiola Blue do you recall which fender eliminator kit you went with from 12oclock labs? I didn't see any of their kits for xt250's.
No "eliminator" needed. Just ripped off all the stock stuff and bolted the integrated tail light where you see it. Then popped the plate on the fender.
Nice!, Thanks for the response!
Wow where did you get the tail light and front blinkers? That looks amazing
Thanks! I've been real happy with them. The front signals are from 12oClock labs and the rear is a cheapy integrated brake/turn signal from eBay. I've been meaning to throw some links up. I'll try to get to it.
Xiola Blue yea if you could list the link for that rear tail light I'd greatly appreciate. Stock xt250 rear isn't very streamline
Check the description for links. I actually just ordered a similar taillight from 12oclocklabs. If you are going to use the ebay one for just a brake light then it's fine but when integrated w/signals I find it way too dim. I ordered the Edge2 taillight with the processor upgrade board. Supposedly much much brighter.
Please post a video of the rear tail light install mod. I would love to know the degree of difficulty to install.
It was really easy... Just remove the big black assembly that goes along with the rear bricklight. Tuck the new light up in place and drill a couple holes in the fender to bolt her down. Actually I just purchased a better tail light from 12oclock Labs that i will be installing this weekend. I'll try to get a vid on how I have it installed. My riding buddy said that he could barely the rear signals.
Hail Murray! Skidplate is unfortunately not stock either correct?
Hell yeah. Skid plate is a Ricochet Off-road.. very nice.
How difficult was the install of the springs in the front and rear? I'm 180lbs and I could definitely use the beefing up on mine
Hey..saw your comment on TT as well. Been busy L8LY. Yeah.. they messed up on the suspension. My daughter is 115# and it was even too soft for her. It's really easy as long as you are comfortable with tools. The front forks are simple. For the rear you'll need to remove the rear tire and the plastics from there it's just a couple bolts. I put the shock in the vice and hit the notched collar with a screwdriver and a hammer to loosen it. Easy peasy! What year do you have?
Thanks for both your replies! I've got a 2015 (best color!) I might have to order the springs you linked if it really is that easy. And I thought the front would have been more difficult.... So what big bore can you do? Is it the same kit for the Raptor 250?
Yessir.. cheaper to buy Raptor kit. Might do it for fun.. I've put Soo much $$$ into the XT.. but in reality I'd like it to weigh 60# less and have 20 more HP. THEN she'd be perfect! I imagine I'll be in a (way lowered) KTM 350 EXC-F within a couple years.
The XT height is absolutely perfect for my old arthritic hips. 🤪
Awesome...Im sure that'll be fun to get working correctly with the fuel injection. I've got to pick up that Power Commander next I think. I'm with you on the KTM route, its just the commute-ablity of it that I'd be concerned with. I know maintenance is much higher and reliability might not be the same. But I suppose a bored out XT would be in a similar boat. Also, those tails don't really support rear racks and luggage which is a bummer too. Have you thought about a lithium battery for more weight loss? I hear they don't work too good starting in cold weather though.
I've so far put on Pro Taper SE bars, barkbusters VPS guards, K&N filter, rear rack, LED headlight bulb, RAM phone mount, and had a custom Renazco racing seat made for me. I have the opposite problem at 6', so I wanted a taller seat to fill out the frame. Heres a pic:
i.imgur.com/2cdBQLn.jpg
I ordered the tail light but the mount doesn't exactly line up with the holes on the stock rear fender. Did you 3M tape it to the fender or something? I had to do this with my current setup and it doesn't exactly look too great. Really wish there was a better aftermarket variety for the XT250...
I'm pretty sure mine line up. I definitely didn't tape anything. Just drill some holes. I sold the XT and got a 350 KTM so I cant look at it for you.
Looking for an update on the "better" brake light. Also, what handlebars did you go with? Are they similar to stock bend?
The integrated 12oclock labs rear brake/signal is awesome. Ultra bright and programmable sequences. I got the protaper "stock KTM/Husky" bend. Everything fit well. I heard of many issues running out of room on the bars with other bends.
Awesome thanks! Which connector option did you have to order for the brake light?
I have 2015 with same FMF, K&N air filter and Powercommander PCFC. I have lots of backfire. I’d really like to know what map works best for your bike.
Backfire is caused by a lean condition. It sounds like your Power Commander is not adjusting the fuel. Or you have air getting into the exhaust at the header somewhere. I ran +7 across the board but she never back fired even at lower settings. Double check the PC install. I saw someone splice into the wrong wire once. PC support helped me find the right wire during my initial install. Their service was great.
planning on getting the 2018 model. but I can't find much infos about this bike
Go to advrider.com and search the xt250 forums. I'm on there.
There is a TON of info out there. This bike has an huge cult following and many user groups, mods, overland adventure blogs, JDM parts, etc. If you can't find Info on the XT250, you aren't looking.
Your Dunlop 606 looks larger than the original 120/80-18. What size did you buy? I'm looking to bump mine up a little. Thanks.
It was the 120/90 - 18. Nice fit but still didn't give me the off-road traction I desired, I gave up on DOT tires.
Thanks!
@@xiolablue5024 What tires did you end up with?
@@MarkSpencerAZ Ended up with Shinko Hybrid Cheaters but have since dumped the XT for a KTm EXC-F.
@@xiolablue5024 did you like them?
Hi very good lucking bike ...... can you please confirm on brand name and model of hand guards an attached mirrors ? Thanks.
Sorry... just seeing this. They are Highway Dirt Bike handguards. www.highwaydirtbikes.com
Is the exhaust pipe melting the back fender
No, but I did add a fuel tuner to richen her up. She's way to lean stock as it is. Lean = hot. Don't make any airflow increases on this bike without adding more fuel. You'll do more harm than good.
How tall are you ? I’m tryin to figure out if I fit this bike or if I’m too big for it. I’m 5’11 225 Ibs
Not the poster, but I’m 6’5 235lbs and have no issues on the bike!
@@GingerPridePKMN thanks for the reply !
Any issues with your new muffler? I'm seeing vlogs where it's melted the fender and plate holder.
No issues. I called FMF before I ordered.. They said I should receive a Spacer with my order and to contact them if I don't. It kicks the exhaust out about an inch and a half. I also have a Power Commander which compensates for the stock lean (hot) condition.
So...is there any noticeable power increase?
Not really no. It's so darn loud that you sound faster at least. I added the "quiet core" insert and it's still too loud for me. But I'm going to stick with it for the safety factor.
Yeah that power commander keeps the bike running cool. I've heard of people that used the spacer and still melted their fenders
Colton Develle I had both. Contacted fmf and they sent me a new muffler and spacer which I think they just changed the angle of the mounting points and added a larger spacer ( I measured new and old spacer). I haven’t rode hard enough to see if it will melt but at idle putting my hand back there, I don’t think it’s shimmed enough. Was running hot exhaust (lean) but also throws soot out the pipe (rich). Pretty sure it’s rich at some Rpms and lean in some. Guessing the easy way to fix it is adjust the PC on a dyno with a tailpipe sniffer.
Nice work. Let me know if you're ever interested in selling this bike!
Can you give me the PN on your spring as I am in the 230 range and would like to do the swap myself on my 15 XT250.
Thanks
JnJ Welding
Here it is... You'll need three collars from RaceTech. I'll look them up and post a link.
Hyperco 2.250" ID x 8" Long 600 lb Blue Coil-Over Spring P/N 188A0600.
I replaced the front springs as well with Progressive Suspension #11-1128 and cut about a 1/2 inch off the stock spacers.
Xiola Blue
Awesome! I appreciate the quick reply!
The Race Tech Collars are here.. www.racetech.com/ProductSearch/12/Yamaha/XT250/2017
You will need one of each: SPSC B5855N, SPSC B5552N, and SPSC B5649.
Don't order the springs from Racetech. I only paid $70 online from a 3rd party seller through Walmart's site.
I did order the collars directly from Racetech but their online ordering is kind of hookey. You need to set up an account and order them. Then either wait for them to contact you or call in for payment. I ordered what I needed and then called them to pay. HUGE improvement for my weight!
No Problem... Snow day here in northern Illinois!
Xiola Blue
Snow day nice! We rarely get them here anymore in Nj 😡. Well, enjoy your day and I appreciate your help!
Thanks
Is that another FMF melted fender? Not the best designed exhaust.
NoSir.. No melt on this one. Just ripped off the ugly brick of a taillight and the donkey ear-like turn signals.
Oh, I though the fender looked crispy at the back.
I agree with regards to the north American taillight and signals. Bloody ugly. The original Japanese spec ones are so sleek in comparison.
I just ordered the factory skid plate and rack for mine.
@@craigjervis5652 Hello, where did you get your factory skid plate from. Thanks
@@robe8306
Ordered it and the factory yamaha cargo rack from japan.
Company called webike.
Great video. I want to buy the same dirt bike stand for my XT250. Can you post a link? Thanks.
Thanks. I got mine at Harbor Freight. They don't seem to have one online but it's similar to this one. I only paid $25 bucks.
www.motosport.com/product/?adpos=1o4&cc=us&creative=188670675997&device=c&gclid=CjwKCAjws6jVBRBZEiwAkIfZ2mAQjHCWmKwAVPaeVZYNQMf0Gep-YRDvwQR4oqso8AnT3sJCTq3agxoCfSUQAvD_BwE&key=Motosport-Steel-Lift-Stand&matchtype=&mrkgadid=3193665185&mrkgcl=500&network=g&product_id=MTP001Q-X002-Y001&pssource=true&rkg_id=h-d53c09cbe7738df6e329b9405cc4abd6_t-1521116939&segment=badger
Is it a tall bike?
No.. lowest of them all actually.