Propeller Rotation Inward Vs Outward Oxidean Animal Twin Cat - GPS Signal Test
HTML-код
- Опубликовано: 27 авг 2024
- ANIMAL TWIN CAT RTR (1650 or 2200kv)
oxideanmarine....
UPGRADED PULL-PULL SERVO HORN
oxideanmarine....
STEERING ROD BOOT
oxideanmarine....
ABC PROPS
www.offshoreel...
UPGRADED STOCK PROP 4519
oxideanmarine....
42 HIGH RAKE (upgraded prop)
oxideanmarine....
GNSS PERFORMANCE ANALYZER GPS
www.offshoreel...
GNSS GPS WATERPROOF CASE
www.ebay.com/i...
PROP BOX (serious inquiry only)
rwarden@gmail.com
BATTERY'S
5200mah 120c 6s ZEE
6200mah 90c 6s CNHL
Thanks for Watching Ironclad Rc Tinker test and tune everything
Personal contact information ironcladedout@gmail.com
I just want to say the water isn’t always flat where I run my boats So it is so great that you run your boats so often so us guys that can’t run our boats can still get the fix.
Even just watching you doing that one extra run before speed checking my heart is in my mouth as if it’s me risking that last run after a perfect run.
When you hit the wood pile with the shrimp rigger in my mind I was running to try to save the boat before it sank.
I guess we have all been there.
So scary and fun all at the same time.
Great work mate.
Thank you. It's always a journey every time we hit the water, never know what will happen. You should get a kick out of tomorrow upload. Nothing went right! 2 boats floating down the river and no way to get them. BG4L
@@IRONCLADRC oh no it’s not a good kick that’s for sure
Thank goodness I was able to recover both boats.
Some great runs!!! Great video! I might just try running inward rotation on my Zonda!
Go for it! Take it easy and feel it out your first run or two. BG4L
Fastest we've gone with my brother's animal was 106mph with super zonda props. That was with the seaking 180a version, If you put a strait edge on your boat or lay it on a flat surface the drive dog would touch the flat surface, rotating the props inward. Not all boats are created equal so it may not work for you but its worth a shot.
Thanks, that's actually about where I like to run mine. 106 is moving! BG4L
Very interesting Big B , in-word is the magic spot , cool that you took the time to find out.. and show the rest of us. Awesome man👍
Me too, excited to see what the animal does next outing
Inward seems like the way to go, might can run a slightly smaller rudder too. I'm sure prop thrust is hitting it. I'd say try 19 or 21 Rake props with 38 bar & see what happens. Tight thrust cone & steering may be less touchy. Just my opinion 🤷 I'm still a green horn
I haven't seen any counter rotating 19 and 21 degree props? I think there all left hand rotation i could be wrong? If I am shoot me some links!
I noticed my animal would spin out a lot easier with inward put it back to outward but I am not going for high speeds, thanks for the tip to buy the 90amp flycolor for the shreddy it's perfect now just got out to test it on 4s.
You're welcome! BG4L
Awesome. I have my animal running outward. To change it to inward do I also need to swap the motor leads?
THIS WILL BE YOUR FASTEST BOAT YET BIG B.
Great job, so informative, running the GPS inside is the way to go, I think it is a great idea to have a fiberglass insert in the Hatch, I know you could do a good job with that. Looking forward to the fiberglass hatch installation video😁
It's hard to cut a hole in a perfectly good hatch, lol. Been considering doing it just gotta find the time. BG4L. Thanks for the huge roll of tape, I have enough to last till next year, I picked up one to.
DYmotorshop can make you a fiberglass lid if you want to start putting your gps in the boat.
Right on thanks for the info. BG4L
Not sure why you put your gps in the rear but that’s adding weight where you shouldn’t have it
Some nice runs there.
Try mounting the gps on the inside of the canopy, in the mock air intake section.
Leave the drives neutral and just shift your batteries a little more forward.
Still think you should get rid of all that unnecessary stuff on the tunnel and put everything in the hulls.
Thanks for the suggestions, just got back from a run, finally hit triple digits, video coming soon... BG4L
Nice one.
I look forwards to the vid.
That was interesting. Cutouts outward and not inward... Should think doesn't make a difference, and their not close like in the mono... But hè, if you dont test it stays just a theory...
Have you tried octura props with more lift vs the high rake abc props? Or like an oxi low rake prop? As you know that makes a huge difference with strut angle required on any boat. Got to keep that nose down and be more careful!
Not yet. I've been planning on picking up a couple of sets of octura props for this one.. still feeling the hull out, so I know which props to buy
try throwing some 4092s 2140kv you can run 45-48mm props
I have a German MHZ Mystic, the strut will not go less than 3 degrees down. You cannot set it to neutral 0. It’s designed to not be neutral and it works. The cat likes the down angle.
Same with the animal twin, I modified the outdrive post so I can get the neutral position. Handles much better with +- 2° down.
Boat Gang!
Do you have a twin motor or twin hull rigger? Great videos sir
Only two twins I currently have is the Deltaforce 29 twin mono and the animal twin cat
Great video. Didn't you try reversing the prop on the twin cat?I bet with a charged battery you can break 100. . Bg4l
I'm going for it on the next outing
I would do a cut out in the hatch and replace the carbon with regular glass where the cut out is. It’s just too risky taping the gps to the boatI I don’t even glass over my cutout I just clear tape over the cut out.