Zcypot I’m glad your enjoying it and getting ideas. It’s always great share ideas
4 года назад
Great choice brother... Cant go wrong with Hasports... Only problem for me is I have bad OCD with my car, and now that all the transmission noise comes into the cabin, Im always paranoid about clutch, trans sounds lol..
Looks like the rear and torque mounts are a must have for that generation si to me. Great work as always fellas ! That engine was moving like crazy before !
Yes more 8th gen content! The side by side videos really show how much less the engine moves under load with Hasport torque mounts! Curious to see how the car will feel with full mount kit?
I’ve had my civic si for about 6 years now. 07 177000 on the dash now. I have only done tein coilovers front rear sway bars and tsx front brake kit. Watching the vids. Has me thinking k24 swap. Love the vids keep them coming.
I have the whole mount kit, 62a, they are awesome such a different experience from stock! Definitely feel the vibration in the chassis during vtec, which intensifies the experience!
Great video John i appreciated that you showed us how to instal them. I was always scared to buy the Hasport Mounts because of the vibration and skill level putting them in. Thanks guys great job and keep the Mugen videos coming👍
great vid I was thinking about getting those 2 mounts for my civic now I will. hate all that movement but I dont want it too aggressive for daily driving. love the channel keep up the good work.
Great video. I went with the first set up on my 07 FA5: Hasport Torque/Rear mounts. Also Innovation(60A) front mount, Oem transmission /Engine mounts, ATI K20 Street Crank Pulley & (New timing chain)
Hey John. I do like what I see, so I hit that LIKE button (like always).😉 Man, that looked like a fairly simple install and it made all the difference. Another satisfied customer. Haha. The fender-mounted GoPro was a great idea, btw. I hope you and your lady have a nice Valentine's weekend.👍😎
The hasport mounts are a great option. Just curious about how many miles you have on your car. So your getting bad engine shake when your braking? Are you tracking your car or is it just a daily driver? Something doesn't add up. Gonna try and help you. Send me the basic info about your Fa5.
@@DunDun2212 It's my daily. Only has 94k on it. What I mean by it moves when I initiate an engine brake is basically the engine likes to move from the transfer of load on or off the gas at certain mph. Feels like the torque engine mount mount is going. Or the dogbone mount as some call it. The mount on top. I'm sure the two lower mounts should be changed too Edit: also I know the mounts on the these 8th gens aren't that great and need to be replaced at some point. Makes sense at my mileage for stock mounts. See so many people running Boomba and other mounts. Plus in order to fit certain headers on my car I need to replace the lower mount anyways so the header has room. That's with the skunk2 alpha anyways
I did not know that there were two options for mounts from Hasport for this chassis and I have been looking at this exact thing lately. Looking forward to seeing the difference between the two and comparing them to stock. Then I will have to figure out what I will be ordering for my FA5
awesome video ... there is minor amounts of torque lost with the stock mounts vs Hasport factory replacements vs Hasport full kit, would be interesting to see the difference in torque to the wheels gain due to efficiency of the mounts
I run solid mounts (75a bushings) from Torque Solutions in my upper and lower engine mounts along with my trans mount. Shakes like crazy, but I have zero wheel hop (notorious axle killer stock on the SRT-4 Neon like mine).
I have the full 70a kit and love the virbrations, makes it feel like a race car. That being said, its true that you only feel the vibrations at idle and take off
Man I'll tell ya, I just installed the the lower torque mounts only (62a) on my 01 GsR Integra. Second I started the car I thought I broke something or jacked the car up hella bad. It vibrates like crazy even with the softer mounts. I'm gonna lift it back up an see, but they're so simple and straight forward I don't see how I could have goofed anything up? It straight feels like a juiced up street car now and not my smooth sailing almost all original GsR. The full custom exhaust I have on here I think adds to the vibration but it's incredibly more aggressive now an shakes the hell out of ya!
Great video I have a B series with possibly mount failed hard to select first after braking motor moves a lot under load all four side mounts look good thinking must be t bracket mount
This is great video, very informative. Me personally don’t like poly mounts due nvh being annoying. Went with spoon mounts for the s2 slight vibration but nothing extreme. Had innovative on my other s2 hated it. I am curious to see the difference between the full kit. I do like the idea of just torque mount be poly looks like it made a huge difference
Can we get a George score for wearing shirts inside out vs. wearing them normally.... Hahah I’m just kidding I’m not even sure if his shirt is inside out or if that’s how it’s supposed to be 🤣
@@georgefitzgerald5861 I've tried using it but my stereo isnt connecting to my flashpro or isnt finding it any clue why I checked the setting on my lap top so I know my flashpros bluetooth is activated
@@georgefitzgerald5861 na it doesnt stay solid it doesnt connect to my phone either I even took the password off and nothing so I know it's not the stereo everything else connects fine
So with the hasport mount kit for 2006-2011 Si, it will be not necessary to change the front one? Just stay stock the front one? im just asking this to my-self because i planned to put this mount kit in my fg2. Thanks!
@@LHTPerformance haha just a question playa, I been using mobil1 synthetic 10w30 in my EGB18B1, & it still burns it when I push it, I'm thinking royal purp or amsoil next
I have a really important question . I got a 08 Honda Civic si but I have stock engine mounts but the headers are hitting the frame do u think using this hasport mount would change it ?
Great videos! Time to invest in a better camera/wide angle lens. Zoomed into your mouth each video lol Improve the quality of your videos will bring you more customers 💯👌🏻
@@LHTPerformance that would be pretty cool if you had a film crew but I think just getting a camera with a wide angle will help you be better. You spend a lot of time doing these videos, and details under the engine bays. might as well invest some $ into the camera so you can be the best you're trying to show us. Just my friendly advise. I've been watching for years now. ;)
Luis Brito Well, this video has made me about $17. Maybe it a super high quality production would double the that 🤔 You anyone that will do this for $34? And folks would still complain about free content.
@@LHTPerformance It was just a little tip, I ain't against you or complaining about free content really? I'm surprised you're sensitive about good advice. I am in your team as I've been supportiving you for years Lol RUclips might not be enough to fund a new lens RIGHT NOW but the goal is for one day it could isn't? In order to get there, there are steps to take. Your business income could fund it since you use RUclips as a form of advertising. Isn't that why you make the videos about the new cars, s2k services? The only important tool about video is a good camera just like your tools you work with at the shop. I do RUclips too as well as owning a business. I know how the craft works and I am sharing the knowledge and wealth with you. Sorry if you feel like I am coming off in any way. It all comes from a good place. 🤷🏻♂️ I'll still watch your videos. Have a good day man.
Luis Brito Hey, didn’t mean to come Off that way. I know what you’re saying. RUclips doesn’t pay enough to buy more cameras. I own a couple G7X which work for us to grab and shoot. We don’t have the time to set up each shot and mic up etc. RUclips is to share what we do. Our work speaks for itself, the camera just captures it. Some of the best paid guys use a crappy GoPro, the best camera is the one in your hand the time you shoot ( Casey) and the G7x boots up, films, and waits for the next time. I appreciate your advice, but RUclips isn’t the business.
B16A5 EK4 I wouldn’t recommend soaking them as it will break down polyurethane. A small amount to help install will soon evaporate and cause no issues.
It helps transfer more power to the wheels instead of losing it through your power-train. Also, if you have an aftermarket header, excessive engine movement can cause it to crack.
There is a much better much less expensive alternative. If you're able to do more than just change parts. If you're lucky enough to find a set... neuspeed race Springs will kill wheel hop all together.
you guys are literally bringing out videos for everything i need lately. I ordered a set of hasports myself.
Zcypot I’m glad your enjoying it and getting ideas. It’s always great share ideas
Great choice brother... Cant go wrong with Hasports... Only problem for me is I have bad OCD with my car, and now that all the transmission noise comes into the cabin, Im always paranoid about clutch, trans sounds lol..
I really liked this video. Awesome idea to remove the hood to show the engine moving around.
Just had my rear mount changed by my mechanic and now I understand the mounts function. Thanks for the excellent demonstration guys!
do I just need to replace the rear what did you replace it with? My engine moves around like crazy
with the same type of mount this video demonstrated.
You guys are giving some invaluable content here for 8th gen owners. Love it!
Awesome. Glad we can share some ideas
Something about an 8th gen doing some pulls, gets me goin. 🔥
Big factsssss
Francis D. The spinning in second man, makes me miss my 8th.
Welshy especially a mugen 😍😍
I also enjoy it!!
These videos make me really miss my 8th gen
Looks like the rear and torque mounts are a must have for that generation si to me. Great work as always fellas ! That engine was moving like crazy before !
Great video showing the difference between stock and aftermarket mounts.
I'm absolutely loving the Mugen SI content. Keep it up! 👍👍👍
Yes more 8th gen content! The side by side videos really show how much less the engine moves under load with Hasport torque mounts! Curious to see how the car will feel with full mount kit?
I’ve had my civic si for about 6 years now. 07 177000 on the dash now. I have only done tein coilovers front rear sway bars and tsx front brake kit. Watching the vids. Has me thinking k24 swap. Love the vids keep them coming.
that was awesome to see that go pro view! nuts to see the engine move that much!
years ago I had the Ingalls upper torque mount. I remember that it increased the vibration quite a bit. Glad to see George is happy with this set up!
Same. I put the stock back on and used the lower rear mount only.
"is that a motorcycle?, oop no, s2000" and this is why you gotta love hondas :D
I have the whole mount kit, 62a, they are awesome such a different experience from stock! Definitely feel the vibration in the chassis during vtec, which intensifies the experience!
Thegreatgabe59 Stay tuned for Part 2. We talk about how to neutrally position the engine to reduce the vibration.
Great video John i appreciated that you showed us how to instal them. I was always scared to buy the Hasport Mounts because of the vibration and skill level putting them in. Thanks guys great job and keep the Mugen videos coming👍
great vid I was thinking about getting those 2 mounts for my civic now I will. hate all that movement but I dont want it too aggressive for daily driving. love the channel keep up the good work.
I put the hardest one being 93a and it vibrates quite a bit but I honestly don't care but I kno it may b an issue for others
I daily drive this car you only really notice it when starting from a stop and with the ac on.
Great video. I went with the first set up on my 07 FA5:
Hasport Torque/Rear mounts. Also
Innovation(60A) front mount,
Oem transmission /Engine mounts,
ATI K20 Street Crank Pulley & (New timing chain)
Hey John. I do like what I see, so I hit that LIKE button (like always).😉 Man, that looked like a fairly simple install and it made all the difference. Another satisfied customer. Haha. The fender-mounted GoPro was a great idea, btw. I hope you and your lady have a nice Valentine's weekend.👍😎
Thanks buddy. Glad you like the videos.
So much knowledge and very well spoken. Cheers! I needed this video today :)
It’s like you read my mind. I’m considering Hasport mounts on my FG2 and I wasn’t sure what mounts to get. Thank you guys!
dualdiagnosis78 Wait for part 2 before you make a decision.
Installed a Header, clutch and Flywheel in BIL's Mugen also used the rear lower mount, works great together. 😎
You guys are the friggin best.
I'm watching this video precisely 9:50 at night lol 4:17
LOL same dude except at 10:50...and I AM sipping on a Dew
I was just looking at mounts for my 2011 Fa5. Going to check these guys out. I can feel my engine move a lot on engine brakes.
The hasport mounts are a great option. Just curious about how many miles you have on your car. So your getting bad engine shake when your braking? Are you tracking your car or is it just a daily driver? Something doesn't add up. Gonna try and help you. Send me the basic info about your Fa5.
@@DunDun2212 It's my daily. Only has 94k on it. What I mean by it moves when I initiate an engine brake is basically the engine likes to move from the transfer of load on or off the gas at certain mph. Feels like the torque engine mount mount is going. Or the dogbone mount as some call it. The mount on top. I'm sure the two lower mounts should be changed too
Edit: also I know the mounts on the these 8th gens aren't that great and need to be replaced at some point. Makes sense at my mileage for stock mounts. See so many people running Boomba and other mounts. Plus in order to fit certain headers on my car I need to replace the lower mount anyways so the header has room. That's with the skunk2 alpha anyways
The mounts is one of my favorite videos I watch over and over again. You should have more George scores on other parts. :)
7:10 that nice FG2 just like mine!! I ordered the Innovative 70A kit about a month ago!! But I have not installed it yet!! Too cold up north!!
I did not know that there were two options for mounts from Hasport for this chassis and I have been looking at this exact thing lately. Looking forward to seeing the difference between the two and comparing them to stock. Then I will have to figure out what I will be ordering for my FA5
awesome video ... there is minor amounts of torque lost with the stock mounts vs Hasport factory replacements vs Hasport full kit, would be interesting to see the difference in torque to the wheels gain due to efficiency of the mounts
Love to see real time testing. Glad you’re doing this great work.👍🏽👍🏽👍🏽😎
Snatching second and feeling that wheel hop or feeling the engine to chassis vibrate into the cabin 🤔 We all know the answer to that GREAT VIDEO 😎
I run solid mounts (75a bushings) from Torque Solutions in my upper and lower engine mounts along with my trans mount. Shakes like crazy, but I have zero wheel hop (notorious axle killer stock on the SRT-4 Neon like mine).
I have the full 70a kit and love the virbrations, makes it feel like a race car. That being said, its true that you only feel the vibrations at idle and take off
Thank you for taking time to make great 8th gen videos!
Subframe bolt missing at 7:03
o DeTeX I pulled them to help drop the mount
@@georgefitzgerald5861 Is that necessary or was it just to make life easier?
Mike Louder it didn’t really help I thought it might
i love the hasport 62a mounts on my old rsx-s!
How are the vibrations? Would you recommend them for a daily?
@@ReidEvers vibrations are noticeable, had it for 550 km so probably needs to break in still?
Thank you for creating this video
Nice motor mounts I’m using innovative mounts for my Ep 75a but I should have gotten hasport mounts
Chris Honda I agree!
Man I'll tell ya, I just installed the the lower torque mounts only (62a) on my 01 GsR Integra. Second I started the car I thought I broke something or jacked the car up hella bad. It vibrates like crazy even with the softer mounts. I'm gonna lift it back up an see, but they're so simple and straight forward I don't see how I could have goofed anything up? It straight feels like a juiced up street car now and not my smooth sailing almost all original GsR. The full custom exhaust I have on here I think adds to the vibration but it's incredibly more aggressive now an shakes the hell out of ya!
Great video I have a B series with possibly mount failed hard to select first after braking motor moves a lot under load all four side mounts look good thinking must be t bracket mount
This is great video, very informative. Me personally don’t like poly mounts due nvh being annoying. Went with spoon mounts for the s2 slight vibration but nothing extreme. Had innovative on my other s2 hated it. I am curious to see the difference between the full kit. I do like the idea of just torque mount be poly looks like it made a huge difference
Love hasport mounts. I run 70a and they are not smooth though even after break in.
Adam Hough what do you recommend? Street or your race duro ? Got forged internals in just waiting to boost it .. Sunday / light auto cross
If your going to boost it and use it for the track I would run 70a
Adam Hough thank you man
Does the mugen exhaust will direct fit on the FA5 civic Si?
Great job
Can we get a George score for wearing shirts inside out vs. wearing them normally.... Hahah I’m just kidding I’m not even sure if his shirt is inside out or if that’s how it’s supposed to be 🤣
George score...lol!
Because of Sarah I always expect it to be measured in Beans or to be over the top like a Doug Score
Shh don’t tell Doug!!
I was interested in how you put the torque mount and you edited that part😩
Anyway nice video👍
Robert Rivera Lol. The rear mount is the easiest one. If you can do the others, you’ll be fine.
Where is your car’s battery?
In your scientific estimation, would this apply to the 9th gen Civics as well? Seeing this makes me want to upgrade ASAP!
Andrew Stewart should be almost identical
What kit is that on the dashboard/touch screen pad, I love it... want it for my 09 civic
Were you guys able to get the hondata app to work on your din stereo I have the same one you do in my si but cant seem to get the hondata app to work?
R Addiction I like torque pro a lot more than Hondata app on the stereo. There is a ton more adjustability!
@@georgefitzgerald5861 I've tried using it but my stereo isnt connecting to my flashpro or isnt finding it any clue why I checked the setting on my lap top so I know my flashpros bluetooth is activated
R Addiction make sure the green light is on solid when mine wouldn’t connect the light was flashing. If that’s the case unplug it and plug it back in.
@@georgefitzgerald5861 na it doesnt stay solid it doesnt connect to my phone either I even took the password off and nothing so I know it's not the stereo everything else connects fine
So with the hasport mount kit for 2006-2011 Si, it will be not necessary to change the front one? Just stay stock the front one? im just asking this to my-self because i planned to put this mount kit in my fg2. Thanks!
Which 10.1 is this? Any good? Looking to get one but not much feedback on them out there
hey would you guys happen to have the oem exhaust that came on the si I'd love to purchase it if youd be willing to part with it
We don’t. Sorry. George sold the stock exhaust off his Mugen already.
Using the term/word score after a youtubers name (George score) is trademarked by Doug Demuro! You guys are legally in trouble now! 😂
dasspr Lol. I knew we heard that somewhere. Dougs a good guy, I’m sure he fine
LHTPerformance i was joking! I have no clue if thats a thing! Keep up the amazing content guys!
Lol. Compared to his channel ours doesn’t exist. 🤣🤣🤣🤣
Best
What's the best synthetic engine oil for that b series k series racing life ?
EGB18 Lol. I’m not touching that subject...I was told growing up, never argue politics or religion...I added ‘oil brands’ in there too. 😉
@@LHTPerformance haha just a question playa, I been using mobil1 synthetic 10w30 in my EGB18B1, & it still burns it when I push it, I'm thinking royal purp or amsoil next
Do you have a link?
www.Hasport.com , follow the vehicle drop down and options. We typically use 62a
Question: if I get the full kit, do I need the upper mount since the full kit does not include it?
Just order the full kit. It will come with the full set.
Hell yeah moogen!
I have a really important question . I got a 08 Honda Civic si but I have stock engine mounts but the headers are hitting the frame do u think using this hasport mount would change it ?
Yes.
You need at least the lower rear mount with any aftermarket header.
Can I have the part # to those 2 mounts
All the information is on Hasport.com. You can buy just the rear mount or the whole as described in the video.
Great videos! Time to invest in a better camera/wide angle lens. Zoomed into your mouth each video lol Improve the quality of your videos will bring you more customers 💯👌🏻
For sure. Maybe I can hire a professional film crew. Someone will pay for it 🤔
@@LHTPerformance that would be pretty cool if you had a film crew but I think just getting a camera with a wide angle will help you be better. You spend a lot of time doing these videos, and details under the engine bays. might as well invest some $ into the camera so you can be the best you're trying to show us. Just my friendly advise. I've been watching for years now. ;)
Luis Brito Well, this video has made me about $17. Maybe it a super high quality production would double the that 🤔 You anyone that will do this for $34? And folks would still complain about free content.
@@LHTPerformance It was just a little tip, I ain't against you or complaining about free content really? I'm surprised you're sensitive about good advice. I am in your team as I've been supportiving you for years Lol RUclips might not be enough to fund a new lens RIGHT NOW but the goal is for one day it could isn't? In order to get there, there are steps to take. Your business income could fund it since you use RUclips as a form of advertising. Isn't that why you make the videos about the new cars, s2k services? The only important tool about video is a good camera just like your tools you work with at the shop. I do RUclips too as well as owning a business. I know how the craft works and I am sharing the knowledge and wealth with you. Sorry if you feel like I am coming off in any way. It all comes from a good place. 🤷🏻♂️ I'll still watch your videos. Have a good day man.
Luis Brito Hey, didn’t mean to come
Off that way. I know what you’re saying. RUclips doesn’t pay enough to buy more cameras. I own a couple G7X which work for us to grab and shoot. We don’t have the time to set up each shot and mic up etc. RUclips is to share what we do. Our work speaks for itself, the camera just captures it. Some of the best paid guys use a crappy GoPro, the best camera is the one in your hand the time you shoot ( Casey) and the G7x boots up, films, and waits for the next time. I appreciate your advice, but RUclips isn’t the business.
*_WD-40 is a no no when installing polyurethane bushings/mounts. It will ruin them_*
B16A5 EK4 I wouldn’t recommend soaking them as it will break down polyurethane. A small amount to help install will soon evaporate and cause no issues.
Aside from motor movement what else do motor mounts do for the car?
It helps transfer more power to the wheels instead of losing it through your power-train. Also, if you have an aftermarket header, excessive engine movement can cause it to crack.
@@Soul_Freezer that's good to know thanks for the knowledge
Jairo Maravilla 👍
Less motor movement should also allow less loss in power. You would be able to put down your power more efficiently.
At 7:03 looks like both the bolts on the rear of the subframe are missing?
Maybe they were removed for installing the mount. Maybe filmed as we we’re working 😉
LHTPerformance okay, I was thinking about that after I finished the vid.
Stock mount shake so bad... bad rubber.
Pains me to watch you installing poly bushings that move without liberally covering the contact areas wit silicone grease first :(
There is a much better much less expensive alternative. If you're able to do more than just change parts. If you're lucky enough to find a set... neuspeed race Springs will kill wheel hop all together.
LOL ok bud hahaha.
Thanks for the laugh 😅