The driver's doorhandle broke on my son's 2009 Mercury Milan the day before Prom! I'm a panic, I searched for a way to fix ourselves and came across this step-by-step video. THANK YOU so much for posting this! I am not mechanically inclined, but followed each step and fixed it ourselves!! Crisis averted! Thanks again!
Great video. Did this myself in a few minutes. Note, I didn't remove the electrical connections. The cable was long enough that I could rest the panel on the ground while working on the handle.
Thank you for this video! My husband and I successfully replaced the driver's side front door handle on a mercury milan. There were more cords and 2 screws on the door panel not one but all the details of your video provided enough information. It was one of the easiest repairs we have ever done.
When the drivers door of my '08 broke, I learned that if you pull the door handle and lock at the same time the door opens. That was 5 years ago. Doubt I'll ever replace it.
Excellent video, went on quickly no problems except getting the initial tab part out. I used a stanley box cutter blade to wedge it out. Thank you for your step by step very helpful!
nice ride brother i would like to add mods to my 08 fusion but seem like good part are hard to find for a good price keep up the content on your fusion....
I did this replacement but my key fob button isn’t activating the lock idk if it’s not strong enough now because it’s been broken for so long or if I just connected it wrong but the handle works fine and the lock it just doesn’t work with the key lock button any suggestions ???
It is similar not exactly the same. The configuration is slightly different behind the door panel as it is bigger and there are more wires on the wire harness.
You can try to put a little grease on it to see if will slide on. I bought an aftermarket door handle that I had that issue with. I put some grease on it and pushed hard and it slid on.
The driver's doorhandle broke on my son's 2009 Mercury Milan the day before Prom! I'm a panic, I searched for a way to fix ourselves and came across this step-by-step video. THANK YOU so much for posting this! I am not mechanically inclined, but followed each step and fixed it ourselves!! Crisis averted! Thanks again!
Great video. Did this myself in a few minutes. Note, I didn't remove the electrical connections. The cable was long enough that I could rest the panel on the ground while working on the handle.
Thank you for this video! My husband and I successfully replaced the driver's side front door handle on a mercury milan. There were more cords and 2 screws on the door panel not one but all the details of your video provided enough information. It was one of the easiest repairs we have ever done.
Thank you
Best video ever I changed all 3 of my door handles less then 10 minutes no cap
And it’s 95 degrees outside
Dude thank you so much! Got it done without breaking any plastic tabs at all and saved a lot of money!
Awesome
When the drivers door of my '08 broke, I learned that if you pull the door handle and lock at the same time the door opens. That was 5 years ago. Doubt I'll ever replace it.
You'd think that, until the lock itself breaks too :D
@@KRonSimis 245,000 on it, in the rust belt. There are three other doors.
@@m1t2a1 😹😹
Excellent instruction. Great attention to detail.
Excellent video, went on quickly no problems except getting the initial tab part out. I used a stanley box cutter blade to wedge it out. Thank you for your step by step very helpful!
Yep...Have the same issue now. OPENING DOOR FROM THE OUTSIDE ALL THE TIME, NOT CUTE! TY TY!
Glad to help hopefully you got it fixed.
I feel that
Good video. One of the best I've seen. Very detailed
Worked like a charm thanks
Great. I just broke the drivers door handle on my fusion the other day. Unfortunately these things are always breaking.
nice ride brother i would like to add mods to my 08 fusion but seem like good part are hard to find for a good price keep up the content on your fusion....
Thanks I will have some more videos coming. I agree most of the mods are expensive.
I did this replacement but my key fob button isn’t activating the lock idk if it’s not strong enough now because it’s been broken for so long or if I just connected it wrong but the handle works fine and the lock it just doesn’t work with the key lock button any suggestions ???
Thanks 4 sharing PUMAS wins tonight
Would this be the same for a power lock door handle?
Yes, this video is done on a car with power locks.
Quick question is that the same way you would put in a driver side door?
It is similar not exactly the same. The configuration is slightly different behind the door panel as it is bigger and there are more wires on the wire harness.
Thanks!
Your Welcome.
what if when you try to place the door handle latch cable into the new handle it’s extremely tight
You can try to put a little grease on it to see if will slide on. I bought an aftermarket door handle that I had that issue with. I put some grease on it and pushed hard and it slid on.