Applying an ABB PLC to a Small Process
HTML-код
- Опубликовано: 8 сен 2024
- ▶ C'mon over to realpars.com where you can learn PLC programming faster and easier than you ever thought possible!
=============================
▶ Check out the full blog post over at
realpars.com/abb/
=============================
There are many manufacturers of Programmable Logic Controllers that are used in the Automation industry. One of the leading PLC manufacturers in the world is @abbplc.
In the previous video, An Introduction to ABB AC500 PLCs, we introduced you to the various PLC models that make up the AC500 product line, the wide range of I/O cards, interfaces, and modules available, and the powerful Automation Builder software.
We will now configure a small ABB AC500 PLC system to demonstrate how the components we introduced in the introductory video are connected.
We will define a small system that will include a CPU and interfaces for Profibus DP and Ethernet. The CPU will be located in a cabinet in the main automation equipment room.
We will require 24 volt DC I/O with one Digital Input card, one Digital Output card, and one Analog Input card located remotely from the CPU in an I/O panel located in the process area.
Additionally, we will include one CP600 operator control panel that will also be mounted in the process area. This HMI will provide the operator access to the process through a touch-screen interface.
1) First, select a CPU that will be able to handle the communication interfaces and the small number of I/O points in the system. Choose the PM583 ETH CPU, which comes with one megabyte of memory, one Ethernet port, and two serial ports.
2) Choose a TB 511 terminal base to support the CPU’s Ethernet port and to provide one additional communication card slot for a Profibus DP communication card.
3) Select a CM592-DP Profibus DP Master communication card to fit next to the CPU in the terminal base. This Profibus interface has a standard 9-pin Profibus connector and supports baud rates from a 9.6 Kilo Bits per second to a 12 Mega Bits per second communication rate.
4) To support the three I/O cards in a remote configuration, we first need a Profibus interface card in the I/O panel to communicate with the “CM592 DP” card on the CPU terminal base. Select a CI541 DP Profibus card and a TU509 terminal unit base.
5) We will need three TU518 I/O bases, one for a single DI524 32-point 24 volt DC Digital Input card, one for a DO526 8-point 24 volt DC Digital Output card, and one for an AI523 16-point Analog Input card.
6) To finish the hardware setup, we will select a CP6615 operator control panel with an Ethernet port. This panel has a 15-inch touch screen and high-definition resolution. We will connect this HMI to the Ethernet port on the PM583 PLC.
We will configure this hardware in the Automation Builder software.
In the end, the hardware will be ready and the PLC and Operator Panel can be programmed to meet the requirements of the project.
The PLC is programmed with the “Automation Builder” software, and the Control Panel is programmed with a software application called “Panel Builder 600”.
=============================
Review the introductory video: An Introduction to ABB AC500 PLCs
realpars.com/a...
=============================
Missed our most recent videos? Watch them here:
realpars.com/n...
realpars.com/h...
realpars.com/l...
=============================
To stay up to date with our last videos, make sure to subscribe to this RUclips channel:
bit.ly/realpars
=============================
TWEET THIS VIDEO ctt.ac/gVmNK
=============================
Follow us on Facebook: / therealpars
Follow us on Twitter: / realpars
Follow us on LinkedIn / realpars
Follow us on Instagram / realparsdotcom
#ABB #PLC #RealPars
It's great to see you guys branching away from just Siemens. Not that there is anything wrong with siemens, but there is a lot of ABB, Allen-Bradley, and such out there too.
They could be very good but last thing I need is more software. I'll stick with AB
Realpars team, I always see your topics and it helps everytime.
Please make specific videos on WinCC/TIA portal to create animation of a project as well as creating tags.
Hey!
Thanks for your comment and your suggestion. I will pass this on to our course developers!
Thanks for sharing and happy learning!
This video surely provides great learning experience. Kindly make more of such videos for different PLC and HMI brands like Siemens, Allen Bradley etc.
Thanks for your kind comment, Zafar! We appreciate your feedback and topic suggestions, I will make sure to forward this to our course developers.
Happy learning!
The main requirement is communication between various plc VFD please try to upload the video related to communication
best channel ever
Thanks a lot for your kind comment, happy learning!
Awesome! Please continue this series with a more in depth ♥
Thanks for your comment and feedback, Muhammed! Happy learning.
Great work 👏
Thank you so much!
thanks for your coach mate. Some increase my knowledge🙏🙏. From Makassar. Indonesia
Great work , keep going in this series guys , you are the best .
Many thanks for your support, Emad!
I am think this vidios very usefull
Glad you think so!
thank u real pars team
best channel .. great efforts .. from Egypt
Thanks a lot!
thank you very very very much gentlemen
excellent presentation ❤️
Thanks a lot!
Thanks for sharing
You're very welcome!
I've already taken the Siemens course you have on the page, I'd love if you make a Rockwell and an ABB course as the one on the page.
That's great to hear, David! Thanks a lot for your positive feedback! I will make sure to forward this to our course developers as well.
Thanks again for sharing and happy learning!
Dear sir superb videos
Sir do you have scada or DCS videos
Can something about siemens programming details
Any plans to introduce Delta PLC in the future videos? They're getting very popular now.
Hi Murillo,
Thanks for your comment!
That's a great suggestion, I will forward that to our course creators. Thanks for sharing and happy learning!
Please make video on ABB PLC , PEC800
Thanks for sharing your suggestion with us! I have sent this over to our course developers.
Happy learning!
Which plc is used to automate a concrete brick machine?
I have automated similar processes with A-B and ABB. Siemens, Omron, Mitsubishi, and many others could be used as well. Each of these PLCs can certainly handle the logic for a concrete brick machine, as each manufacturer makes CPU models suitable for single machine control.
Excuse me, ai523 module is an active or a passive?
AI523 is an analog input card (interface). It can supply loop power (4-20ma @ 24VDC) to each channel, so in that sense, it is active. It can also be configured for RTD inputs, which could be considered passive.
Add object
I wouldn't say that ABB is one of the leading PLC manufacturer in the world. At least from my experience,that is not small. Leading brands of PLCs are Allen-Bradley and Siemens and that's it.After them you have several blank spaces and than maybe ABB,Omron, etc...
Not leading PLC manufacturer, but #1 in DCS production.