Hourglass Stage Design Idea | RGBW LED Tape & Yarn
HTML-код
- Опубликовано: 13 сен 2024
- Here we go with another stage design idea for church.
In this episode, I walk you through how we designed and build this LED tape stage design including how we used yarn to achieve the hourglass shape.
Thank you for watching. Please SUBSCRIBE and ring the bell to be updated when new content is released.
* NEW WLH MERCH*
CHECK OUT OUR MERCH STORE: teespring.com/...
How to Wire 32 Channel DMX Decoder, Power Supply, RGBW LED Tape • How to Wire 32 Channel...
Where we get our screen graphics: www.churchmoti...
PRODUCTS IN THIS VIDEO
RGBW LED Strips: amzn.to/35OxPNJ
-second option: amzn.to/35LyVs4
DMX512 Decoder: amzn.to/3dtBwcx or amzn.to/3fzYtfV
Power Supply for decoder: amzn.to/2WLdq6B
Brad Nail Gun: amzn.to/2YJrDU5
Gorilla Clear Glue: amzn.to/3cdmyXY
Liquid Nail: amzn.to/2WzIsOA
Lazer Level: amzn.to/2SPkde4
Yarn Options: amzn.to/2YKCPj8 , amzn.to/2WHmcSS , amzn.to/3fqXnDg
Movers, Focus Spot 3Z: amzn.to/3drDBpq
/ worshipleaderhangout
Follow us:
Facebook: / worshipleade. .
Instagram: / worshipleaderhangout
Web: www.worshiplea...
JOIN OUR FACEBOOK GROUP: / 159676088077343
All product links help support Worship Leader Hangout financially.
MY CAMERA GEAR
- EOS R: amzn.to/2t35x1n
- Lens: 24-105mm RF: amzn.to/2SmdsR1
- 80d: amzn.to/2o7Hds9
- Lens: 35mm: amzn.to/2KgzWM8
- Lens 17-55mm : amzn.to/2DrQVLs
- ND FILTER: amzn.to/2FxdKMF
- Lense Hopper MIC: amzn.to/2DqVaVJ
- Rode Link Lapel MIC: amzn.to/2KzXhet
- TRIPOD: amzn.to/2Drd8Yn
- MINI TRIPOD: amzn.to/2MoXhxS
- Big Light Aputure 120dii: amzn.to/35eTFbr
- Light Dome ii Aputure: amzn.to/2Yfw4G7
-Lanturen Aputure: amzn.to/3bFeZcu
-Small Light Aputure MC: amzn.to/2xahQeo
- DRONE: amzn.to/2pMm4oJ
KEYBOARD: amzn.to/2SDcwFZ
This may be the best “How-To” video i’ve ever watched 🙌🏿
You have impacted the structural integrity of the truss by drilling in to it. As a event technician if I ever seen this I would condemn the truss as its not designed to be drilled through.
I pastor a church in V.A. ....this man has been great help to me ....he does a great job explaining the HOW TO !! THANKS KEEP UP THE GREAT WORK !!
thanks a lot! That "GLUE IT" is very undervalued lol
Thanks for sharing...this is very generous of you. Good job.
Can you create a video going more in depth about the function and purpose behind a lot of mechanics, including the decoder, board, and software? Please and thank you.
Working on one for that exact thing. Thanks so much for watching this one.
@@WorshipLeaderHangout Did you guys take down the video that went more in depth with the software, decoder, and board??? I can't find it anymore!
@@calebvazquez3396 Yeah man I did make it and realized I made a simple but important wiring mistake. I don't want to be misleading and confuse people so I pulled it until I re-shoot that section. It will be back up soon. Shoot me a DM on Instagram if you have any questions about the wiring.
@@WorshipLeaderHangout Ok cool. Just wanted to make sure I wasn't going crazy. I will be looking forward to your video! 👍🏻
ruclips.net/video/36JUNKiRjR8/видео.html
It looks great with the lights low. Can you show a photo of what it looks like during the teaching.
I’ll post a pic on Instagram tomorrow.
@@WorshipLeaderHangout thanks thanks n thanks for so much inspiration
Thank you so much
Amazing job, great tutorial! What type of fog machine or hazer is being used to see the beams on the movers?
Great videos!! Just curious if the cord from the decoder has to go into the dimmer box first or straight to the board/computer program?
I like your video's!! Can you give some good software for stage design? Or which one do you recommend? 💪
Thank you! So like I said in this video I used keynote this time around 😬. Surprisingly it worked very well making the shapes but there is no way to design on scale. However, I typically hand draw ideas and eventually decide on exact measurements later in the process. As far as software, I’ve only used keynote and photoshop for stage design. But like I said, I rely more on my brain and old fashion pencil and paper. Hope that helps.
@@WorshipLeaderHangout Thank you! It helps me a lot! 🙏
If u add some muzata led diffusion channels, it would look top knotch 😉
I wish I had back then. Future projects for sure.
Hey man that’s a sweet set up how many DMX decoders did you use? I’m assuming with 16 Led strips you would use two of the decoders and 2 of the power supplies?
looks awesome but one thing you might want to rethink is the drilling through truss and hanging in the way you have - huge liability issue
you could have just done eye bolts off the unistrut to chain or aircraft cable to a half coupler with an eyebolt on the truss - once you drill through that truss its worthless and the pre engineered rating is moot - unless you had an engineer sign off on this I would seriously rethink the rigging - again the lighting looks awesome though.
Hey! Thanks for this insight! It's helped me develop a plan for an install concept for a small and growing ministry. I was able to get almost all the way to the end of the project. The issue I'm running into, though, is that when operating standalone mode all colors work, all strips work, and even the macros built in to the decoder works perfectly. When using DMX signal, control is still present, however, it flashes and strobes as if there is an intermittent issue. I'm using 8 channels in 4ch mode, no terminator, and 8bit. Do you have any suggestions?
Love the videos! About to do this at my church! This is weirdly specific but at 12:06 you are crimping/clamping the wires together. What is this called and is this what I would want to use if I wanted to connect this to a long cable run? Also, do you feel the need for diffusers on your lights? Mine will be about 20-25 feet from congregation. Wondering if it’s worth the extra $70 for a 10 pack. Thank you so much!!!
Can you review your church lighting
I want to learn do you have course or step by step guide
Hey I think I saw your new design on fb
Love this design!!! We are planning on doing it in a few weeks. Question.... How many rolls of LED tape did you buy? If I'm mistaken I counted 18 different strips, does that mean 18 different rolls of tape?
Nice man that exciting. Send me a photo or two on Instagram when you get done. I probably used 16 strips. With the center section being 4’ and 5’ I can use one strip for two.
Are there any other DMX-Decoder for these LED-Stripes? Because Amazon won't deliver them to Switzerland.
can you please do video about hazers which are good affordable hazers? my church is small and we have some people asthma has a hazer an effect on people with asthma or allergy? does the hazer needs to work the whole service or just an our before ?
This is a good idea. We use a water based haze fluid and only run the hazer 10 min prior to the service and turn it off at the start of the sermon.
Hello....what's the name of this software that you used in designing the stage ???? And can you give further tutorials on how to use the softwares
We need to chat dude. We're in the middle of a sanctuary remodel and working through some lighting ideas. And I'm definitely limited on my knowledge here.
Call me anytime!
Hello- do you have a picture of this showing it without this video?. I'd like to to send to my team as we are trying to change our stage design. Thank you
Can we see all of your lighting setup
I like this idea
What wire do you use for your long runs?
Not sure what they’re using, but we’ve found that cat4/5/6 Ethernet cabling is great as it is perfectly colour coded, and even has the extra white wire if you have a white channel on the leds. (We just cut off the extra white wires)
sooo, drilling through the truss and hanging it with thread rod would be the hardest way to accomplish that, they make things for truss (and/or attachments that fit the trusses diameter) exactly to hang this way without drilling through it, much easier than drilling it.....anyways, your setup looks awesome, very creative!
Thanks Justin. This was another rigger and that’s how they did it at the time. Not sure how they do installs now. But thanks for the info. I’ll look into it for future projects
@@WorshipLeaderHangout np, not that big a deal, it got hung, just mentioning there are easier ways.
I’m struggling in the video was just one led tape but if you use 8 leds how do you address every single led ? Or do you have just one Adresse for all leds?
This is non addressable tape, the 8 channel sets just means whatever leds are connected to each channel set will all be controlled the same. Addressable led strips are only 3 pin, 5v, gnd, and data, while these are 5 pin (12v, r, g, b, w)
Truthfully if you wanted to do threaded Rod for hanging lighting you could have used unistrut as it’s made for suspension and interfacing with rod. What structure did you connect the threaded rod to? What was the connection method? I cannot stress this enough because I see a lot of people who are inspired by this design… please don’t EVER hang truss this way… this is a serious thing whenever hanging lighting or audio equipment in the air. I’m not trying to be hyper critical, it’s really just unsafe and very not correct. 😳😳
What did you use for lighting the Hourglass Panels
LED pars shooting from top and bottom. Slim pars
Where is u church?
Hey bud ! how do I connect the power supply? Am I suppose to connect it to both inputs?
Yes. One power supply will power both sides. (Both inputs)
make sure the wires are thick enough for this though... and there is an upper limit for the distance the cables can go. Try keep the voltage as high as possible as long as possible. (The higher the ampere the thicker the cable and the more the voltage drops over distance. this drop is more significant at lower voltages.)
Do not mess with high power / high voltage systems if you are unsure about what you are doing and ask an electrician if in doubt! You don't want a kid dead or a literal fire in your church!
Can you send me the file of your stage drawing? I know you did it in keynote.
Contact us over on worshipleaderhangout.com and we will get it sent to you.
Hello, how can I send you a photo of my church and see if you can recommend a design?
trasucido por google
Feel free to send me a DM through Instagram
Why didn’t you paint the wood *before* putting it wall together, and then just touch up any scrapes, would have been much easier.
I need your assistance to design a background for my church. Can you help me with ideas? It's the first time we are going to do this..
Hi Ryan, send me an email through our website worshipleaderhangout.com. We can set something up from there. Thanks so much.
@@WorshipLeaderHangout thank you very much..
How many meters of LEDs did you use?
This design is just over 40 meters, or 132 ft.
Hey dude what LED light the hour glass? Thank you
He said he used a par on the top and bottom, not sure what, but anything would work.
12:30 looks like an American DJ Hex Par.
Thanks
No Problem, if you have any questions feel free at ask.
What power supply do you use for the dmx decoder?
This is it. amzn.to/2WLdq6B thanks for the reminder.
Thanks man! Whenever corona fades out come give a visit to LifePoint Church in Clarksville TN. We’d love to show you around!
Thanks so much. Let’s do this
Sweet! Email is will@lifepointchurch.tv - shoot me an email and let me know, my friend!
Cringing on the drilled truss
FILO anyone?
Oh this is beautiful... Your email sir
Please let me know if you're looking for a husband
Oh no!!! You should not EVER drill intro truss to hang! There are so many legitimate ways to hang lighting truss and drilling is not one! Threaded rod is fine but the connection to the truss is not good. This voids any real rating of the truss.
Chain and spansets would be the correct way to go!
Thank you! This was done by an “established AVL company” several years ago the same week that I installed this design and was addressed with them not to long after after someone else said basically what you did.
@@WorshipLeaderHangout that AVL company owes you some new truss then! 😬