RGBW LED Tape & Fabric Church Stage Design Idea
HTML-код
- Опубликовано: 24 май 2021
- In this episode, I am showing you how I take by stage design concept and turn it into a reality. It's a lot of work to plan a project of this size but it can be done and you can do it too. Make a plan, put it on paper and get to work. The gospel of Jesus is not contained in these four walls but it's an honor to make the place we assemble to worship our Lord and Savior a beautiful place.
-Thank you for watching. Please SUBSCRIBE and ring the bell to be updated when new content is released.
___________________
SPONSOR: www.churchmotiongraphics.com/
___________________
Products We Used to Make This Design
-RGBW LED Tape (Black): amzn.to/3firOgR
-Gorrilla Glue Clear: amzn.to/3bQLZ3E
-DMX 32ch Decoder: amzn.to/3oOS5GF
-Decoder Power Supply: amzn.to/3wu6DhI
-Shrink Solder Connectors: amzn.to/3yuOiTs
-Heat Gun: amzn.to/3hQNKBF
-Fabric: www.rosebrand.com/product2842...
-Air Staple Gun: amzn.to/3oUIdeQ
-This is the stapler I use but any will work well.
-My Favorite Work Gloves: amzn.to/3feFhq6
-Extension Wire: 18/5 Solid Jacketed Sprinkler Wire (By-the-Foot) www.lowes.com/pd/Southwire-18...
____________________
* NEW WLH MERCH*
CHECK OUT OUR MERCH STORE: worshipleaderhangout-2.creato...
____________________
WE ARE KINDA SOCIAL
Facebook: / worshipleade. .
Instagram: / worshipleaderhangout
Web: www.worshipleaderhangout.com
____________________
JOIN OUR FACEBOOK GROUP: / 159676088077343
____________________
Most product links are affiliate links.
KEYBOARD: amzn.to/3o6jYd3
MY CAMERA GEAR
- HDMI ENDOCDER CamLink 4k: amzn.to/3w2AuxH
- EOS R (Chads Cameras): amzn.to/3o48XZI
- Lens: 35mm Macro RF: amzn.to/3tA0yOT
- Lens: 24-105mm RF: amzn.to/2SmdsR1
- 80d (Davin's Cameras): amzn.to/2o7Hds9
- Lens: 35mm EF: amzn.to/2KgzWM8
- Lens 17-55mm EF : amzn.to/2DrQVLs
- ND FILTER: amzn.to/2FxdKMF
- Studio MIC: Rode NTG 2: amzn.to/3bjjoDD
- MIC: Shure Lense Hopper : amzn.to/2DqVaVJ
- MIC: Rode Link Lapel: amzn.to/2KzXhet
- TRIPOD: amzn.to/2Drd8Yn
- MINI TRIPOD: amzn.to/2MoXhxS
- Big Light Aputure 120dii: amzn.to/35eTFbr
- Light Dome ii Aputure: amzn.to/2Yfw4G7
- Lanturen Aputure: amzn.to/3bFeZcu
- Small Light Aputure MC: amzn.to/2xahQeo
- DRONE: amzn.to/33vgNCr
- PODCAST MIC (SM7B): amzn.to/3f4bTS6 
Хобби
You’re the only guy I can find on RUclips that has idea and tutorials on led light strips. I started using them in our kids space and I wanted to do dmx but couldn’t find anything about using them on stage. Thank you so much man for all the ideas and tutorials
woow amazing. we always pray for our church renovation completion . cause we believe God will provide.
awesome video!!!! for people trying to replicate this make sure when you picking led lights from amazon you check how separated the led lights are, and when you pick the pine wood pick the ones that are super straight. God bless you all
Looks awesome!! Simple tools and material used to make a great backdrop!
“You cannot do this by yourself.”
My three years of no vacation beg to differ 😂
For real though, having a plan and a team makes a potentially agonizing process fun.
Appreciate the great content!
Thanks for the ideas and work you do. A.C.T. (About Christ Theater) will be using these ideas with their stage and church.
Fantastic videos. We are renovating our church here in Norway and want to add LED tape to the design. The back and side walls are large and clean, but white colored... Could you give us some ideas of how we could use LED tape ( and maybe fabric) on white walls?
Thanks!
OMG this is awesome! You are so smart and talented, and handsome! Thanks for sharing!
So far the best
How funny is this .. I have just started to learn how to pull together LED lights using a chip called ESP32 and I was thinking it would be cool to do something at church with them. Randomly your video popped up and I was not thinking BIG enough lol. This is so cool and such a cool project to get the church involved with, if they are open to it :)
Hi! I'm Ana from Buenos Aires Argentina, i love your work. Amazing 🤩. Thank you 😊
Thank you and thanks for watching Ana
Hello, I really love your design, I'm trying to implement something similar to our church. However, I live in the UK, can you recommend similar material I can find? How did you hook up the frame at the top? DId you also use one DMX 32ch Decoder for all the RGB? Thanks
Great! thanks for the ideas sharing)
I have a question. How much is this white net visible when the RGB-light is turned off?
i am on to led strip panel biulding, thanks for makeing this video. god bless.
Hey, I love the videos on the stage designs! Just one question, do you guys need permits to build these sets?
Good Job - thanks
I am making panales for a dj setup,, very interested in the conectors, plug, and unplug to the dmx decoder, thanks
This is great
Love your videos, thank you for all of the great ideas we are few years behind on working your designs, we are working the ping pong ball design to use in our teen room and doing the boxes with the Yarn in our large church for boxes for lettering.
Hola gggy es fytdtdAwr a s
This is awesome! Just a suggestion to pre- sew all the pleats according to the dimensions of the frame and have it just stapled to save time.
God bless you all! Love your work🙏🏽💯❤️
Thank for sharing your expirience. If somebody know manufacturers with secret frames for lighting pars on walls, somthing like electric lifts, let me know please
Hello Chat, we really liked the design of the lights, we have all the frames with their LED lights connected to the decoders, but I am stuck in the part of how to connect one decoder with another (I have 4 in total) and how to assign channels to each strip of light, do you have any video? Our plan is to include all the lights to the LightKey, but in these two weeks, we will temporarily connect to an Elation DMX Operator mixer.
nice design
Hi great video and thank you for sharing. It must really enhance your services. I am looking to create a similar backdrop. Would you be able to tell me what material you used. God bless
Hi how are you doing?I am loving your videos. Any chance you can give me tips for my project. I have a small room (the space is 6mtsx6mts) and I am trying to find the best configuration. I am planning on doing a total of eight BTF-LIGHTING addressable led strips (60 leds/m) (5mt each 12v) + Muzata diffusers. What would be the best way to power them? Maybe 2 60 Amp Power Supply (running 4 and 4, or running one at the beginning and one at the end)? How many Injections would you recommend? Would I get away with one ESP32 board or should I get more? Or is there any board you would recommend for longer projects? I've seen ENTECCs Octo as an option but would love to get your advice on it. Greetings in advance, love your content
Do you have any videos showing how you design your stage using keynote?
Could you describe how you (or where) you attached the power and encoder to the fixture? Top or Bottom? Floor or on the fixture. Thanks.
love your video man need to post more its been forever since the last one
Thank you!
@@WorshipLeaderHangout what p0rojector u use
Question, What color is the fabric? When you go to the Rose Brand link, two colors appear
Are all the light lit up only by the led or are there bars hitting the fabric as well. Is it the LED strips fully lighting the panel?
Using this design as a reference - love it! How did you hang or mount these fabric and 1x2 frames to your stage? Hang it to pipe? or are they french cleated somewhere?
They are hanging from the truss with plastic coated steel wire from a hardware store. I used zip ties initially to get them into place before finishing with steel wire.
@@WorshipLeaderHangout love the video and design! Just wondering if you have any videos or pictures showing how you hang things like this using the wire you mentioned above? I’m a worship leader from Canada looking to do similar designs but just not quite sure how to hang them properly. Thanks for all you do!
@@WorshipLeaderHangout how do you connect led strips and then light fixtures in thr church all to the light mixer? Do you use a dmx splitter? I habe one 512 dmx decoder for 8 led strips which i understand can thrn be sent to the light controller but i also have about 6 light fixtures i want ro connect to the light controller. How do i do that please
Hi, Where do you download the Keynote for layout the stage?
Awesome decoration, inspirational, One question, I am using led strips with a decoder and power source, but the source emits a "digital sound" when the lights are on and increases if the brightness of the lights increases, that even interferes with the audio system (I don't know how), did you have that problem or do you know how to solve it?
I didn’t have that problem but you may need to have your sound and lights on different power circuits.
Respect fi yu my brother
Thank you!
You appear to have 30 individual strips (2 per 15 panels) and your saying they can all be individually controlled? Are you using 4 of the 32 channel controllers or did you serial link some of the strips together? Thanks.
Can you use tulle fabric ?
Can hot glue hold the tape?
7:35 i need this conectors
Wow!
Mentioned link for How to combine/ extend the led strips but don't see it in description? Thanks, love the idea
This is probably not what you are looking for but I was probably referring to this video about wiring the led strips to extend the wires: How to Wire 32 Channel DMX Decoder, Power Supply, RGBW LED Tape
ruclips.net/video/36JUNKiRjR8/видео.html
@@WorshipLeaderHangout Thank you, think it is what I was looking for !
what is the name of your church? i'd like to check out a sunday morning service online to see how this design works with your congregation
What kind of fabric?
So if each strip is separately addressed, does that mean you have 30 DMX decoders?? Each decoder has 8 outputs but isn't each decoder just one DMX channel? Or am I missing something.
I use a 32 channel decoder allowing me to program 8 LED strips on each decoder.
How do you connect the led strip decoder and light fixtures to the light controller
Via DMX and a lighting usb interface
@@WorshipLeaderHangout so sorry please tellnme what do u connect where? Just a small detail as im new to this. Thank you so much
Thanks for sharing. It s good that you could use keynote to do the layout
Thanks for watching. About 6 years ago I started using keynote in that way because I didn't have the means to pick up a proper design software. This works for now but I'm sure I'll make my way towards a more dedicated design app.
@@WorshipLeaderHangoutI honestly didn’t know keynote had these capabilities. Which other design apps are you aiming for ?
What is the name of the fabric you used
anyone concern to comment what software he's using to create idea for stage lighting.. i heard "kino" ( i'm not sure about the spelling ) thanks!
I used to use Keynote because I didn’t know how to use other design software. Now I use LightKey
Hi Chad, could you please show how the stage design looks with all the stage lights on, like when the pastor is preaching? Just so we can have the whole picture. God bless, Ruben
Good idea. Look out for a story here on youtube soon. We use ellipsoidal's and use the blinders on them to keep the light off the set design and only on the front section of the stage. The end result looks very similar to what you see in this video.
Hi Chad... I have the same question 😊
Could you post a picture?
did you find strip lights to be brighter than uplights?
The are not unless you double up but they look really good going all the way up the edge.
@@WorshipLeaderHangout thank you for this reply. With led strips being 10% the cost of an uplight, I could double up and allow for a better cheaper option.
How i can contact with you guys? Need help with computation
I use to use these backgrounds when i got stoned
?
How do you get the pleats at the top to match up?
I measured them as I stapled. Then when I went to the other side I pulled tight looking down the panel making sure each fold was straight and in line with the one on the other side. I also continued to measure each pleat. Only one gave me an issue with not wanting to match up properly so I used a steamer to loosen the fabric.
@@WorshipLeaderHangout I'm doing it pray for me lol. You need to come to Wisconsin and help me lol 😆
Do you have a link for the extension wire?
18/5 Solid Jacketed Sprinkler Wire (By-the-Foot) www.lowes.com/pd/Southwire-18-5-Jacketed-Sprinkler-Wire-By-the-Foot/50148248
@@WorshipLeaderHangout we are using 18 gauge 5 pin LED wire just to keep cost down. then we had a design change and this wire wouldn't have been so bad. =)
blessings as the software is called to make the designs that showed blessings
It's an Apple presentation app called Keynote. Not made for designing for stages but I still manage to use it.
@@WorshipLeaderHangout thank you very much ❤️❤️
Link for the extension wire?
It’s a 5 wire jacketed sprinkler wire from Lowe’s. Thanks for watching.
How many 32 ch decoders do you use in this design?
We used 4 for this design.
@@WorshipLeaderHangout with this same design as you, can i use only 1 decoder (knowing that i May not control independently the led strips)
Did anyone else do this at their church? If so how did it turn out?
I'm working on doing the same and will share feedback soon
Could you show where you attached the power and dmx decoder to the fixtures?? Thanks@@ebube4god
@@ebube4god How did it go?
Want to work like this and also w u
This fabric doesn’t exist any longer, has anyone had any luck with another low cost alternative? Sheer organza seems to be really thin?
I’m looking thru comments for same thing. Went to local fabric store and they had nothing that would work. Someone at church had tons of left over tulle that wouldn’t pleat and was still too thin even doubled up. Now I’ve got LEDs, connectors, wire, etc coming tomorrow. Frames are built and painted….but DIW without some fabric.
@@spencecrisco376 dido.. Trying to find some cloth that would work is apparently more difficult than expected
@@camerongaddy3896 well. Not really. Same company we ordered 25yd of NFR white gauze. Was like $116 shipped. And it’s what they used. Has to be. Grabbed a few stills and blew them up. What’s in the link and what they used…2 different ones. We built the first panel tonight. I’ll see if I can post a pic tomorrow. Or I’ll look you up in the book of faces. 😎
@@spencecrisco376 sounds good to me. It'll be next week before I finish tackling this project
@@spencecrisco376 how did it do?