How To Replace Starter 2009-17 Chevy Traverse
HTML-код
- Опубликовано: 20 окт 2024
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AES...
The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start. This video shows you how to install a new starter on your 2009-2017 Chevy Traverse.
• Check here for more videos on the 2009-2017 Chevy Traverse • Chevy Traverse 2009-20...
This process should be similar on the following vehicles:
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• T20 Socket
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Magnet - Extendable
• Pick 1aau.to/oa/1AXA...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Traverse 2009-2017 1st Generation: • Chevy Traverse 2009-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
BRO- You really skimmed over what a pain that top motor mount bolt was. I dont know how little your wrists are but if you are over the age of 7 your hand aint going in between the clip/fans assembly and frame. One of the worst jobs ive ever done. I now know why the dealership priced it through the roof. -they didnt want to do it either. In all honesty that bolt had me questioning my faith😂. -disclaimer i did mine on the shop floor. Was only able to jack it up maybe 6".
Thanks man. It took me longer than expected but I still got it done. 👍
I just to love Chevy,,, getting a chevy traverse was a big mistake, I was about to go for a Toyota, and I took a gamble with the traverse, and I’m haven nothing but problems, this its one of them,,,, Very disappointing!
Such a great video great lighting and great explanation thank you
This is a great video. Thank you for sharing your knowledge.
Wow awesome Job. But does Chevy ever think about how impossible it is to Change the starter.
To get that 4 bolt that hard to see it much easier to take the oil filter off and directly underneath it the hidden 4th bolt is there. You can't see it of course but it directly underneath the oil filter and also it much easier for me atleast to reach it from the top not under the car. I used a long socket with a short extension and a ratchet.
And that's why I love my Toyota
That's the exact same thing I said.
99 toyota 4runner. 260000+
2008 toyota 4runner sr5 4wd 247k miles no issues
Good 12 min vid. Took me 4 hours :-) I acutually loosened the top of the bumper and unbolted the radiator so i could push its bottom up and foward so i could get my hand up in front of the engine. After that it wasn't bad. Oh. Take oil filter off too
Does that knock sensor need to come out to change the starter or are you just doin that since you're there?
Nice video dude. New subscriber here. I have a 2012 Traverse and it’s looks like a lot of work. We’ll time to get to it. Thanks for sharing
It's easier to take the catalytic converter out. I didn't have to touch the mount or jack anything up. This is the LONG way to do it. If ur like me and u get paid on straight commission, jus take the heat shield off the converter from the top, unbolt the 3 nuts on top of the converter, get under the car, unbolt the 2 nuts from the bottom of the converter, and the rest is eating cake on ur birthday. Don't believe me? I dare u to try...
That motor mount with the four bolts. The top one is impossible to line up because you can't see it... took me an hour just to get that one on, and yes remove the oil filter. Great tutorial though.
You did it the hard way
I recently picked up an Acadia at auction. I will never buy another. Everything on it is impossible to access. I curse the engineers every time I look at the vehicle.
Great video.
Thanks for sharing.
New subscriber here
😳 wow!!!HE is Good!!
So before I even attempt this with just Jack stands, 12 degree weather. How do I know for certain it’s the starter? Spend more money on a meter reader? Just bought a code scanner. Mine stays running, shut it off, and it’s completely dead. Not even a click. Alternator or started? Has a new battery… horrible vehicle!!!
Great video but I think I’ll let a pro do mine 😂
smacked that engineer that designed a piece of s***
will this method work for a 09 acadia ? i don’t want to mess with the exhaust also what size socket to remove knock sensor ?
How long did it take you to replace , how many hours
On my 2011 Traverse you can not get to the oil filter from the bottom. I see your's sticks right out there. I don't know if mines the starter or not. Sometimes it just clicks. Im going to try cleaning all the ground connection first. Good video, Thanks
Déjeme decirle primero muchas gracias y si hacen lo que el video dice les va a quedar muy bien el trabajo
Do u have to unplug the knock sensor to do this?
Do you think I could do this on ramps in front yard. My starter may be on the way out…
Muchas gracias lo mismo dogo pero tu forma es la correcta paso a paso usen dos personas para el tornillo que esta oculto del braque arriba y saque lo por ensima mas facil asi y no quiten catalizador pues podrían complicar mas la cosa
The world will be a much better place when GM/ Chevy is no longer making cars.
great job sir!!!!
Donde puedo conseguir el motor de arranque hermano ya compre uno en Amazon y me salio malo
can I do this on a 2012 GMC Acadia denali? don’t they have the same engine?
Yes
Yes it does just drop the catalytic converter and start or is right there
How’d you even get that sensor unplugged. You just pulled on it
The 2010 Traverse that eye'm fixing has a round part on the bracket that can't be removed with a socket. Eye need help
My wife’s starter just went out on hers and the shop is charging $763 to replace it! Highway freakin robbery!!!
Well the part is worth $250. And as you can see by the amount of labor that it takes to do this. $500 is about right
What if you don’t put a block under the oil panel ?
Impossible make this replacement by yourself
Did you take the radiator out
+@apollomars865 You do not need to remove the radiator.
Should be a crime having to do this on jackstands in your back yard
Where is the 2019 starter?
For the price of the new starter, you would think they would have sold it with a new heat protector cover 🤦
I'll never buy a Chevy again. Ever. Whoever designed it was intentionally making is as hard as possible to replace everything so consumers pay the most money for repairs. Back to Hondas and Toyotas.
But also your a/c compressor is removed to make it easier!!
Worse place to put a starter where the catalyst converter at
Why don't you show the car starting?
This is brain surgery with all the knots removals 😮
The best trick and tips for GM cars is to not buy them.
Holy crap, what a headache…
If you don’t have access to a car lift there is no way to do it 😡
Are you wearing sunglasses ?
The easiest way to do this job is to remove the oil filter and the manifold shield at the top all the room u need
Make sure u got a 15mm ratcheting wrench easy Peezy 🥂🧰🛠️