Hi, the height is quite limited so I would recommend to do stamping before stitching the bag into one piece. The stamp size that can be used is not large, the largest one I’m using with higher success rate is about 2.3cm x 2.3cm. So far no big issue from the machine, but I have my control module changed about 7months after using due to power outage and it damaged the module. The manufacturer sent me a new control module FOC as the machine is still under warranty.
Hello are you able to help me understand the control buttons on this machine. I would like to be able to set and hold at a specific temperature - my machine didn’t come with any instructions. Thanks. Also, do you know if I can raise the head position?
Hi, the head position can be adjusted with the screw with label at 2:04. And for temperature control there are only two buttons needed, the UP and DOWN arrow of the 5 buttons. Take note that DO NOT touch the rest of the 3 buttons as it may delete the factory setting. The 2 round button: Left one is for Heating, right one is to turn on the LED, which you'll need to adjust the levelling of the LED manually. I've received your IG DMs and I'll send you some screenshot for better understanding
Can I ask about the price? I was interested in this for the laser but I like also the Dream Factory one. I'm not sure which could be better. The only thing I know it's that I like to change the one I have and make a upgrade. Thank you. 😊 From this brand I plan to buy the stitching Clamp for sure.
Hi, it’s manufactured by MAXITA from China. Price was about USD700 in 2021 including shipping to Malaysia. You can look for it on Aliexpress if you’re interested to get one as I’m not selling this product.
I’m not sure about the maximum embossing area but I would say it is not suitable for large stamp, I have a round-shaped stamp with 35mm diameter and I think it’s the maximum size for me to get the stamped logo nice and clean
Hey Hang thanks for your detailed unboxing video. whats the cons of this model? can you adjust the stamping height?
Hi, the height is quite limited so I would recommend to do stamping before stitching the bag into one piece. The stamp size that can be used is not large, the largest one I’m using with higher success rate is about 2.3cm x 2.3cm.
So far no big issue from the machine, but I have my control module changed about 7months after using due to power outage and it damaged the module. The manufacturer sent me a new control module FOC as the machine is still under warranty.
E hỏi tí được không ạ
Hello are you able to help me understand the control buttons on this machine. I would like to be able to set and hold at a specific temperature - my machine didn’t come with any instructions. Thanks. Also, do you know if I can raise the head position?
Hi, the head position can be adjusted with the screw with label at 2:04. And for temperature control there are only two buttons needed, the UP and DOWN arrow of the 5 buttons. Take note that DO NOT touch the rest of the 3 buttons as it may delete the factory setting.
The 2 round button: Left one is for Heating, right one is to turn on the LED, which you'll need to adjust the levelling of the LED manually. I've received your IG DMs and I'll send you some screenshot for better understanding
Can I ask about the price? I was interested in this for the laser but I like also the Dream Factory one. I'm not sure which could be better. The only thing I know it's that I like to change the one I have and make a upgrade. Thank you. 😊 From this brand I plan to buy the stitching Clamp for sure.
It was about USD700 with shipping to Malaysia. I would recommend to go for Dream Factory one as it can be used for pattern cutting too
Where can I shop this machine?
Hi, I got it from Taobao. But I believe it's available on AliExpress too.
بلد الصنع ايه وبكام ومين المستورد بتاعها
Hi, it’s manufactured by MAXITA from China. Price was about USD700 in 2021 including shipping to Malaysia. You can look for it on Aliexpress if you’re interested to get one as I’m not selling this product.
How to adjust height of press movement?
There are 5 holes on the LHS of the MAXITA plate. You may remove the screw inside one of the holes and do height adjustment.
Printing areas please
I’m not sure about the maximum embossing area but I would say it is not suitable for large stamp, I have a round-shaped stamp with 35mm diameter and I think it’s the maximum size for me to get the stamped logo nice and clean
which serie is this !¡
It’s EC-27 by MAXITA