Building 4 Iconic JDM Model Cars in 1 Video - Toyota Supra, Nissan R34 GT-R, Mazda RX7 & Honda NSX
HTML-код
- Опубликовано: 28 июн 2024
- Toyota Supra: amzn.to/49JU7yJ
Mazda RX-7: amzn.to/3T7N8bS
Nissan R34 Skyline GTR: amzn.to/3TbN22D
Honda NSX: amzn.to/42Vu4SG
Mini RB26DETT engine models: junsminigarage.com
It took me nearly 4 years, but I have FINALLY completed all four legendary JDM model cars from the 90's!! Woohoo!!! Can't believe it has taken me that long! While putting together this 2-hour long compilation video, I found it very interesting to see how much I've progressed since I started building model kits 4 years ago. And of course, a huge thank you to those who have been watching my videos and supporting the channel since then!! You guys are the best!
0:00 Toyota Supra
26:20 Mazda RX7
45:27 Nissan R34 Skyline GTR
1:17:57 Honda NSX
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutters: amzn.to/3z643lt
Tamiya Hobby Knife: amzn.to/3aJRTmx
Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Surgical Scalpels: amzn.to/3dSlMTu
Duck Poster Putty: amzn.to/2Yix37r
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Mini Hand Saw: amzn.to/3mXY1Mt
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
All music tracks used in this video are licensed through Audiio.com
"The Clearing" - Daniel Jorgensen
"Believe" - Ivan Grigorashchuk
"Belonged" - Giuliano Poles
"Ascend" - Christopher Galovan
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
#toyotasupra #R34 #rx7 #nsx #gtr #scalemodel 
Авто/Мото
It took me nearly 4 years, but I have FINALLY completed all four legendary JDM model cars from the 90's!! Woohoo!! Can't believe it has taken me that long! While putting together this 2-hour long compilation video, I found it very interesting to see how much I've progressed since I started building model kits 4 years ago. And of course, a huge thank you to those of you who have been watching my videos and supporting the channel since then. You guys are the best!!
0:00 Toyota Supra
26:20 Mazda RX7
45:27 Nissan R34 Skyline GTR
1:17:57 Honda NSX
3000GT
Honda 4eva😈😼🔥
Love your work!! But I really miss the voiceover!!! The witty commentary, explaining what you are doing! Bring back the voice!!!
amazing work.
Incredible skills Jun 👍👍👍👍
Nice Car model videos and Not forget the R33 GTR
He has the 34🤷♂️
He has built both the r34 and the r33 model kits as separate videos
Professional 👍
Fantastic work, well done on completing the 4 iconic 90s supercars from Japan ☺️ all 4 look great and it was a pleasure seeing them built in one video 👍🏼 well done!
Это конкретный релакс, расслабляет на раз два
Would like to see you build an fto or starion next, cheers🎉
Beautiful, missing the Mitsubishi GTO
I love your video ❤ You honestly have made me get into model kits way more than ever because of you keep up the good work and I’m definitely gonna start modeling as a hobby
Glad to see these videos again! Very relaxing to watch, and inspires me to develop my skills further as a Gunpla builder. I can only hope one of these days I'll have the space, budget, and maybe climate for an airbrush setup...
i love this channel🙏 its what inspired me to make models
My son loves supra!
Wow
Nice work! Mind if you build the Tamiya Porsche Turbo 1988? Like to see it!
Where do you get your models
I would love to build an R34 GT-R like yours, what website can I buy the Fujimi brakes and wheels you used??
Could you tell me what paint colors that I should have?
I mean like "I should have all primer colors such as black, white, red, green & blue, because I can combine each other to get new other colors"?
It's ok 😎🙌👍🇯🇵
Hey Jun where can i find molotov liquid chrome? Also does polishing compound work on car bodies that are just been painted after 2 hours instead of using TS13 clear coat?
You should be able to find Molotow in hobby stores or online stores. I will only polish the body when it’s completely dried and hardened, I usually let it dry for at least 72 hours(the longer the better)before sanding and polishing. 👍
@@JunsMiniGarage is sanding optional or no
Lindos autos
Make it 5. Subaru WRX STi added
Hi Jun got another question for you. So remember the time where you did the Initial D Keisuke RX7 FD3S Stage 1 Aoshima Kit and you chose the pop up headlights to be on? What material did you use to smooth out the hood and front right and front left fender after you took out the pop up headlight cover? Also im saving up as well to get the same Aoshima Initial D Stage 1 Keisuke RX7 FD, like what you built. Im either getting the pre painted or the one i have to spray paint it. Also to put the lights on the pop up headlight covers, did you use glue or no?
Also just subscribed to you recently 😊
If I remember it right I used some 600-2000 grit sand paper to smooth down the edges. And I did use super glue to glue the parts together.👍
is there a reason why you dont airbrush the body colour, choosing to use the spraycan instead?
I use both, but sometimes I chose spray cans for their speed and convenience(especially if it’s a single color paint job). 👍
Um ilI put my text in the wrong video 😢😂 but my question was what type of liquid do you use for the stickers on the cars pls and thanks 😊😊😊
I used Tamiya “Mark Fit Strong” which is a type of water slide decal solution. I usually brush a small amount on the surface before applying the decals.👍
@@JunsMiniGarage thanks for sharing this with me today 😀😀
Hi
Supra is not JDM
Bro got car knowledge from a walmart 💀
And im not a human
It is lil bro
colors are all wrong here. Both Supra and RX7 should be red. NSX should be white or silver. GTR blue is good choice. if you must use yellow, RX7 in yellow
and thanks for the great builds Jun 👍
Ohhh nooo did they use the wrong colors?? Cars can be repainted.
>If you must use yellow, RX7 in yellow
...He did paint the RX-7 yellow though?
Also how is white for the Supra and red for the NSX incorrect, they literally have those colors on the boxes