(ASMR)Honda/Acura NSX Model Car Full Build Step by Step | 1/24 Tamiya
HTML-код
- Опубликовано: 24 фев 2024
- 1/24 Honda/Acura NSX Scale Model Kit - amzn.to/42Vu4SG
Wanna show some support for the channel? Grab a set of mini RB26DETT engines on my web store at junsminigarage.com. They are currently on sale!
Hi guys, in this video I am finally building the Honda NSX! One of the legendary classic JDM machines built in the 90s! Enjoy!
My other videos-
1/24 model car full builds - • 1/24 Scale Model Car F...
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutters: amzn.to/3z643lt
Tamiya Hobby Knife: amzn.to/3aJRTmx
Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Surgical Scalpels: amzn.to/3dSlMTu
Duck Poster Putty: amzn.to/2Yix37r
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Mini Hand Saw: amzn.to/3mXY1Mt
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
All music tracks used in this video are licensed through Audiio.com
"Through the Mist" - Matt-Stewart Evans
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
#Honda #nsx #modelcars #scalemodel 
Авто/Мото
![[Full Build] 1965 Honda F1 RA272 Model Car - 1/20 Tamiya](http://i.ytimg.com/vi/i2YhUhAMM9U/mqdefault.jpg)
![[Full Build] 1965 Honda F1 RA272 Model Car - 1/20 Tamiya](/img/tr.png)
Asmr better than background music
I agree
Mad respect for going with the Acura version.
NSX is Honda's masterpiece and great to see the model of the car
amazing build
Thank you very much.🥺
Hi Jun! Thank you for all of your content and teachings. I've studied and adopted your practices for modeling, and it's been really inspiring. I Just finished a Tamiya Toyota Celica GT-Four Item 24113. I used all of your techniques and process and it's turned out to be the best model car I've ever done. I'm really proud of it and you helped me along the way so thank you, I really love your videos and how easy you've made it for me to take my skills to the next level.
sorry 24133 haha
Thank you very much. I am glad my videos are helpful to you.👍
Fantastic work 😳 Awesome video and what a lovely clean NSX you've built there. Super well done and thanks for sharing 👍🏼👍🏼
Thank you very much Karl.
You've got the whole 90s JDM collection now. Love the dedication to details on this like going for what I assume is the cosmoline under the chassis. Admire the commitment to the ASMR style too, if I tried that on my videos people would have to listen to my cat being annoying, the washing machine, all the bad words I say when I get frustrated, and sports on the background giving me copyright strikes, lol!
Cosmoline! Thank you for the info!👍And I totally understand the struggle when trying to keep the ambient sound “clean” while filming.😩
Masterpiece!
Additionally, in the case of window masking, Zoomon seems to be selling window masking tapes exclusively for this vehicle
and Long time No see!
Hi Jun! I wanted to let you know that your videos got me through the hardest part of my life. I suffered an extreme mental break down last year, and your videos are one of a few things that got me through it. You have such a peaceful aura about you. Thank you!
I am glad my videos have been helpful to you. Thank you very much for watching and take care.❤️
YESSS! Love watching you build a model I’ve made to see how you do things differently (and better).
はじめまして！素晴らしいですね！
Awesome video and build!!
Thank you.🥺
@@JunsMiniGarage Your welcome!
Looks good
I just finished this kit and you have truly put me to shame. Superb as usual.
Using the mirror finish material for hose clamps in the engine bay is mind blowing. I would have never thought of that
Epic build as usual, with a perfect balance between humour and practicality.I would like to ak though - if you're starting out in the hobby and money is at a premium (like me lol) is it necessary to wetsand and polish the clear coat? Or can it be left?
it makes a huge difference :) I waited 3 months to get everything I needed in preparation, and it was well worth it. But if your happy with the results that's all that matters. With the two tubes of polish and the sponges that Tamiya sells, goes a long way and they will last you many builds.
@@coruphillips2428 Thank you!
Thank you very much. If you are looking to build a new car with shiny, spotless paint job then wet sanding and polishing will be an important part of process. Especially when there are imperfections such as dust, fabric or serious orange peels in the paint, wet sanding and polishing will help correct those issues. You don’t always have to use modeling specific products. There are automotive detailing products available in stores which are generally at a lower cost.(and also much larger quantities)👍
Stunning work as usual sir. I have always liked this kit and you have done it more than apt justice. I appreciate your touches to give the model a good used look while keeping the Acura's beautiful exterior.
Wow, dude.... Get back to you first 300ZX video and then watch this one. In 4 years You did a huuuuuge progress!! Great respect. I am starting my adventure with the airbrush painting next week and I was afraid, that my tamiya spray cans won't be useful anymore... I would never come with an idea of decan these paints and use them with my airbrush XDDD Thanks for the tip! Keep up the good work.
Superbe travail, comme d'habitude mon ami 😉👌🔥🔥🔥
The Acura NSX is beautiful exotic sport's car excellent job Jun's in scale model build
I always wanted to see a build of this car, and you are truly doing it justice.
nice👍
Awesome job! Can’t help but feel like the windscreen washer jets should be black 😅
love your videos, enjoy watching. Thank you for the tips 😊😊😊
Such a helpful video. Thank you so much for sharing!
Thank you.❤️
Great video. I have this kit to build for a very old friend and this makes an outstanding reference. Thank you!
Thank you. I am glad the video is helpful to you.
You have inspired me to move my NSX up the build list!!! Looks great!!!
I have build this one, this one have Acura Decal
I always love your videos. Thank you!
Thank you very much.🥺
nice work
I love your videos so much… i hope there are more videos coming ❤️❤️❤️
Love your videos!! keep up the great work.
O resultado ficou espetacular!
Obrigado por fazer esse vídeo, me ajudou a diminuir o stress e ansiedade.
Cool as always. 👍
I have found my new favorite channel
As always, incredible work, Jun.
やばすぎ
うますぎ
Ayrton Senna will be proud, when he drives his NSX when he was taking it for a drive.
pls do a stance car :) i love ur vids btw
I love your videos and cars. this is a masterpiece in every detail💪👏
Why didn't you use light red for the taillights? Super nice work!
Very cool build, unfortunately the protection coat and corrosion effect that you did on the underside of the car is not realistic since an aluminum chassis doesn't have all that, but otherwise very cool car and vert nicely done
Excellent work (as always)😊 i only have one question. You apply the color, you sand any imperfections and the you apply the gloss coat? Or you sand the imperfections in the color and you repaint the color again before gloss coating? Thank you in advance 😊
Thank you for the question. If the paint has too much imperfections and I have to sand down a couple of coats to remove them then I would apply a couple of additional color coats before clear coating. It’s better to be safe and add extra paint layers because the paint layers from the airbrush are very thin.
Background not being bright makes it perfect for a relaxing video to fall asleep to.
I think I found the perfect channel I needed!
Have you tried Hasegawa carbon decals? The weave looks nice in pictures and texured like real carbon fiber and they also have silver carbon and dry carbon but I cant find anything on someone trying it.
Looks great! What rotary tool is that?
Among the other pieces of information, now I know why you've always been talking about a mist/thin coats of paint first, and only later thicker/wet coats.
What drill bits do you use?
what tools do you use on the dremel for polishing?
It’s a cotton polishing wheel.👍
is it fine to buy some of these at book off? could there be loose parts? awesome videos!
If the kit is still sealed then it should be fine.👍
Hi just a question Jun. Does TS13 Clear work on stock prepainted paint on the car body?
It should. I will just apply a coupe of thin coats before getting some wet coats just to be safe since TS13 is pretty strong stuff. But you can also just polish the body with polishing compound to get it to look shiny. The original paint usually looks pretty good.
Hello Jun what do you put the decals in before putting them on the car I'm wondering because I began building a kit and I am stuck on the part of what what to do with the stickers
The water slide decals are put in warm water for 20 seconds so they can be detached from the paper backing. Once they are detached by the backing paper you can use a small amount of decal solution for its application.👍
@@JunsMiniGarage Is it meant to be steam water or just a bit warm?
Do a tank
I built this kit back when it was new in the 90s, what a pleasure hto build
Good video, but I miss the funny comments of previous videos 😢
Thank you. The funny comments will come back.😂
what type of glue do you use?
I used BSI super glue for assembly.👍
You're like my type. Not liking to a single bit of dust or anything on the NSX
Why am i just now seeing this? Sometimes i hate youtube.