How to make 4s2p liion battery
HTML-код
- Опубликовано: 5 сен 2024
- In this one I'll be showing you how to make your own 4s2p Li-Ion battery pack from any kind of batteries. All the parts needed are in the links below.
Spot welder:
www.banggood.c...
Cable with XT60 connector: www.banggood.c...
Balance connector:
www.banggood.c...
Heath shrink: www.banggood.c...
Kapton tape: www.banggood.c...
Battery tester: www.banggood.c...
LIPO charger: www.banggood.c...
Soldering iron: www.banggood.c...
Thanks. This is one of the best videos on this out there. I made a battery just like this successfully on my first try. Thanks.
Glad I could help
Great way to explain the conections, ty
Great video. I’ve been wondering how to build an xS2P battery in that configuration. Thanks 🤘
Thank you! You explained it perfectly. Now I can make a pack!
Glad I could help
Very calm and complete video. thx for that ^^
Thank you for this detailed explanation. Would you make a video on the applications you are using for these batteries. I am going to use mine on an EDF Jet 90mm. Would a 6s 6p of 4500mah and 50A be enough to keep the jet in the air. Also would you explain how the readings during flying of these batteries work? In Lipo I start landing when the 6s announce me a voltage say about 22v. But I noted in case of LIion the reading is 2000 , then the pilot said still 1500 and it’s time to land.. I am not sure what the number 1500 he was talking about, is it mah !? . Also , how these batteries are rated 50A, then the pilot says he was able to pull 120 amps, are the Amps of each battery added together? Many question marks ⁉️
hey, is one layer of strip enough for you ? I always put at least 2. using 0.12*8mm strips
Gran aportación amigo, gracias a ti me construí mi bateria 4s2p
I finally made my 4s2p 18650 pack thanks to you and it works great I used sanyo 10amp 3500 mah batteries, I now want to build a pack with same configuration but 4s 3p whats your thoughts on this please? I'm trying for more mah. But if pack is any taller the hatch won't close on my ar wing pro. Any advise would be appreciated. Thanks again
Thanks
This is only video around on how to do 4s2p 18650 what were calling a stick battery pack so thanks, I'm going to give this a try as soon as my batteries arrive and have watched this several times but still worried about folding it up just somewhat confusing, so i guess on the balance leads cell one will show one cell voltage, cell 2 twice the voltage and so on are the cells in order I mean side by side? Great video thanks new subscriber
So I'm still waiting for my 18650 batteries but would really like to know how much flight time you're getting with this pack on your wing, also I would like to try and build 4s3p pack what's your thoughts on this? Thanks again
Very helpful, thanks for the video.
Thank you great video
Since it's bridged both sides negative. Both sides positives. Connecting both negative to positive on both sides just for extra current?
Hard to explain
Guess this why I seen nickel steps in box shape.
I want to do a 6S2P or 3P or 4P
Just nervous. I want to use molicel p45b
I'm also building this same pack for a ar wing pro, just wondering roughly how much flight time you get with this pack on your wing? Thanks
what nickel strip thickness did you use in this pack ?
Nice content and keep up good content onwards.
Much appreciated
Thanks again, built a pack successfully!
Got a question, How would you wire a 6S2P with the same configuration as the 4S2P?
( 6 Batteries per layer, 2 layers, just like the 4S2P except using 12 batteries)
Thanks,
Ron
Awesome. It's doable but you need really good isolation between the rows because "the fold" would be just on one side after a half of the layed down pack. It's really dangerous because if the insulation is not sufficient it will short your pack.
Now that you have spot welder and good with soldering what's your preferred method to build high performance packs for drones? I'm also wondering which method would allow good conductivity in high amp draw situations. Like 50-100Amps.
From what's I've heard(from experienced people building packs), soldering is better in high amp draw situations with thicker guage wire.
I'm deciding on the best approach and i have access to either of the methods.
Thanks for the video detailing your experience. And warnings more importantly :)
Browse through my videos and look up soldering tutorial. Also the one with 21700 shows how safe soldering is if you know what you are doing. But to answer your question. Esther method would work but I honestly think soldering is my preferred method.
@@mrRockwellFPV i went through all your videos :D just wanted your opinion between both. I guess I will go ahead with soldering then. Thanks!
What size heat shrink did you use
Never wear a metal ring while working with batteries!
Good advice. I'm still a novice with that thing (ring)😆
What kind of tape is that you used to tape the ends of the batts and tape the batts together?
It's called kapton tape.
@@mrRockwellFPV the kapton tape is amberish and see thru. I’m talking about the tape that looks like masking tape that you used to tape the ends of the cells when you spoke on not wanting the cells to rub together.
@@IAmTheCraftsmanit's called masking tape.
@@sendit_rc that’s what I thought. Thanks man.
when doing a 2P battery, what are the risks of having one of the pair being not adequatly balanced? (e.g., battery1 has 4.1, 4.1, 4.1, 4.1 V and battery 2 has 4.3, 4.3, 4.3, 4.3 V on each cell, accounting for an average of 4.2) and risquing unbalanced battery? I did a 3S2P and this is woring me a little :)
You have a balance plug and the cells will balance out. Don't worry
@@mrRockwellFPV I’m even more worried after your answer xD
@@xnoux1 don't see why. They are not crazy out of balance and that's really a minor thing. Just don't worry 😉
@@mrRockwellFPV if they were crazy out of balance, how would you know?
@@xnoux1 i have 36 batteries in my e scooter. Do you think I worry about balance of each cell in that battery.🤓
Good work but bad sound and bad cam angles.... Hope you have a BMS right in the device otherwise you cant properly charge batteries and you could burn them....
Sorry that the video is not up to your standards but I'm really trying. Also why in the world would you use a BMS in a drone battery!?
BMS not needed in this application
I'm not sure how you went from 3 black balance leads to 5