That GPU output cable routing make multi-monitor setups way more difficult. You'll have to buy new 90 degree cables, or get the feet, or 3D print feet.
i set my rad fans to exhaust for these types of hot box itx builds, just need to plan extra room for fan grills. the only thing is that i have to turn the front of the case away from me because the amount of heat extraction out of the radiator can make it feel like a space heater. although that could come in handy for the winter
It looks like there's enough space for a classic build without a riser, but unfortunately, it isn't supported. I also agree that with all the expensive extras, it feels like they're trying to squeeze as much as they can from the customer, to the point where it's uncomfortable.
I do understand not including a 90° HDMI adapter. HDMI 2.1 signal integrity is already kinda hit or miss and including an adapter that reduces signal strength and quality even more is just asking for problems. Including a cable for normal length use is imo the best they could have done. Long HDMI cables are way to expensive to include "just in case" and an 90° adapter will just fill the web with complains of monitors / TVs not working correctly anymore.
Can this fit an ATX board with a full sized PSU and a 2 or 2.5 slot GPU? I would like to reduce my case size, but I don't want to have to repurchase my MOBO or PSU.
very cool case and really well done review
Extension Bracket is the only thing missing from this exceptionally detailed review. Kudos👍
That GPU output cable routing make multi-monitor setups way more difficult. You'll have to buy new 90 degree cables, or get the feet, or 3D print feet.
i set my rad fans to exhaust for these types of hot box itx builds, just need to plan extra room for fan grills. the only thing is that i have to turn the front of the case away from me because the amount of heat extraction out of the radiator can make it feel like a space heater. although that could come in handy for the winter
Best PC Case for me.
20:40 Bro, it shows the cable being installed above the support bar, not below it like your trying to do. Was there no room to do what the PDF shows?
If you have a 3d Printer there are ways to expand the front for sure and the side I believe..
It looks like there's enough space for a classic build without a riser, but unfortunately, it isn't supported. I also agree that with all the expensive extras, it feels like they're trying to squeeze as much as they can from the customer, to the point where it's uncomfortable.
The best way to use this case is get a itx boards with display port out over usb C so you only need bottom ports for hdmi
This is a great honest review. But the lighting was terrible. Couldn't get the depth of some of the components and I'm on OLED!
I do understand not including a 90° HDMI adapter. HDMI 2.1 signal integrity is already kinda hit or miss and including an adapter that reduces signal strength and quality even more is just asking for problems. Including a cable for normal length use is imo the best they could have done. Long HDMI cables are way to expensive to include "just in case" and an 90° adapter will just fill the web with complains of monitors / TVs not working correctly anymore.
Hello my good sir may you review the new proart 360 aio cooler(it’s super new)
I use G series cpu, like the case
Can this fit an ATX board with a full sized PSU and a 2 or 2.5 slot GPU? I would like to reduce my case size, but I don't want to have to repurchase my MOBO or PSU.
You put that computer on the floor?
so use 7800x3d.... with a low pro air cooler?
7800x3d is not even hot chip, it's easy to cool by low profile cooler.
The price tag is kind of enthusiast level.. I'd rather go with a cardboard box then 😅
Thanks for the review though !
Not first
Needs 360mm rad support. Sorry, my gpu has a 360 so the weight of the heat spreader didn’t fracture my housings foundation.
Gotta be the Dan A3 then, don't think there's anything smaller on the market
Yeah okay