How do you connect Fog lights to turn on and off, without having to turn your Headlights on first. Is there a way to connect the Fog lights as a separate connection.
Yeah you can run your own switch or somehow custom wire up the factory fog light switch to have power source even with headlights not on. Wouldn't be too hard with a schematic. I'd like to do that someday.
Don't wire them to your head light wires if you don't want them to turn off, instead wire them straight to the battery.That way you can turn them on/off with switches, You can buy a fog light wiring harness on Ebay and aftermarket switches as well. Its what I did.
ThatAccordGuy thank you and I’m currently in West Virginia, but I reside in Arizona. I might have to take a trip up to CT and check it out. How’s the car scene there?
@@chris__whips Not as much into the car scene as I'd like to be so i couldn't tell you much. Maybe once my car is finished I'll try to find some local meets and whatnot.
They are, but I'd be careful cutting and fitting anything unless it's high quality. These are kinda cheap and water may get in eventually if you drive in the rain. I don't daily my car so they will probably last longer
How do you connect Fog lights to turn on and off, without having to turn your Headlights on first. Is there a way to connect the Fog lights as a separate connection.
Yeah you can run your own switch or somehow custom wire up the factory fog light switch to have power source even with headlights not on. Wouldn't be too hard with a schematic. I'd like to do that someday.
Don't wire them to your head light wires if you don't want them to turn off, instead wire them straight to the battery.That way you can turn them on/off with switches, You can buy a fog light wiring harness on Ebay and aftermarket switches as well. Its what I did.
That thing is turning out so clean
Thanks dude! Appreciate it! Long process but worth it!
Those look stupid cool
Haha thanks man. I can't stop staring at them. Going to go blind probably 😂
Would like to do what you did but use the existing turn signals instead. Just can’t find a way to wire it up for a 96
Does the kit come with the bolts you need to mount it to the bumper? if not which size bolt did you get? - thanks
It didn’t. Bolt size doesn’t matter as long as it fits through the holes. I recommend like 3/8 bolt with some large washers and locking nuts.
@@ThatAccordGuythanks 🎉
@@ThatAccordGuyalso, for durability I want to put diode dynamics switch back halos but make use of this housing/mounting solution
Link for the fog light ?
Yo the link for the fog lights take you to a different LED lights for fender wells.
Lol dang wonder how that's possible...
Hey bud how did you install the hardware they give you? Looks like I need some bolts for the screws
Might need to make a trip to the hardware store. I think it came with everything I needed. Don’t remember. It’s been a while
I was here to see how to run the actual wire to switch lol
Nice car!
What’s the first mod did you do on your accord?
I think cold air intake or exhaust was the real mod.
Hey man good to see another accord RUclipsr putting in work. I have an Accord wagon I’m working on h22 swapping. Where are you located?
Nice man good luck with the build! Living in CT hbu?
ThatAccordGuy thank you and I’m currently in West Virginia, but I reside in Arizona. I might have to take a trip up to CT and check it out. How’s the car scene there?
@@chris__whips Not as much into the car scene as I'd like to be so i couldn't tell you much. Maybe once my car is finished I'll try to find some local meets and whatnot.
Are these universal bro and what’s the link?
Yep, they’re universal got them on eBay. it’s been a long time, no link sorry
Are they still working? asking as there is lots of negative feedback on them and i don't know if i should cut my bumper and instal them.
They are, but I'd be careful cutting and fitting anything unless it's high quality. These are kinda cheap and water may get in eventually if you drive in the rain. I don't daily my car so they will probably last longer
ThatAccordGuy what wires did you tap into for the halos and then what wires for the fogs ??
How are these holding up, are they still working?
Yes still working!
Bud, where can I buy your front lights and corner lights
On eBay if you mean the fog/Halo's in front. They're super cheap too. Headlights are OEM just clear coated for now.
How to I buy the same front bumper that you have ?
Front bumper is stock. Lip is from eBay. I think it's HC1 Style. The one I bought is now out of stock tho.
What size is the light?
Probably 2" across