Это видео недоступно.
Сожалеем об этом.
$13 ebay Halo LED fog Light install with Angel Eye LED Switches
HTML-код
- Опубликовано: 13 мар 2018
- link to lights ebay.to/3cUYYQn
link to switches ebay.to/2WjNxMj
paypal.me/1997...
How to install or modify custom DIY Halo LED Fog lamps with halo LED switches or rockers in a car bumper. These went in my 1997 Saturn station wagon. These are ebay fog lights with 2 different functions. They're easy to install with just a few basic tools.
Wiring video: • 19mm LED latching swit...
link to lights ebay.to/2Tkl5Io
relay connectors ebay.to/2pQeMw4
switches ebay.to/2GVYyK0
Fuse Block: amzn.to/2Dqx2RN
Wire strippers: amzn.to/2DqgyZT
Stuff I need for production! a.co/iM4PGFF / velocity_labs velocity-labs.s... www.velocity-la... / velocitylabs / velocitylabs
script:
Halo LED Fog Lights with Halo LED switches
Fuse Block amzn.to/2FGHir2
Beauty shots saturn - locked down different exposure
In this Episode of Velocity Labs we’re installing some sweet ass LED FOG Lights.
IN a SATURN.
Oh, and real quick in case you’re just looking for the wiring diagram, here it is. We’ll show this again later.
We’re going to be installing them in those factory looking spots, and I already popped one out to take a look at it. It’s just held in by a plastic groove that snaps into the bumper. So we’ll be able to drill a hole in these and mount the fog lights directly in them.
They came with some brackets but we won’t be using those because we’re going to mount them flush. Here’s all the hardware, the fog lights, 2 relays and two halo switches. We need two because the fog lights have 2 functions, the Halo Light and then the main bulb. Plus 2 switches looks dope.
I’ll also be adding this little fuse box to make things easier, but it’s not necessary. Plus this piece is easy to replace from a junkyard in case I mess it up.
It’s just a few screws and a couple clips, but some little plastic clips on it broke, so i’ll epoxy that later.
I tried taking out some plastic with some tin snips but it was making it crack pretty badly, so i switched to the die grinder and rounded out some nice openings for all the electronics to fit through. This worked WAY better than trying to cut it and it almost ended up looking like a factory design. I mean, if you squint and don’t notice the rough edges, uneven cuts and general deformity of it, it’s basically stock. I did a test fit and had a just little extra to take off over here but that will give us plenty of room to get our wires through.
With the switch fitment done now let’s fit the fog lights themselves.
I measured out and punched the center, then grabbed a hole saw. The hole size I need is about 2 and a quarter inches, but all I could find was 2 and 1/8th, which I think will be too small, buuuut it;s all I got. . I clamped them down to a 2x4 with THE CLAMPS… and then drilled out the hole in the center. As expected, it was a little too small though, so… die grinder. Now you may be wondering, how am I going to secure the fog lights to the factory plastic retainers without any bolts or screws? If you guess JB WELD plastic bond epoxy, you’d be right.
But first let’s see what they look like when they’re lit up. Hooooo LEEEE shit that looks awesome. OK, now I’m stoked, let’s get these mounted.
First we’ll scuff up the back to promote proper adhesion and then mix up the epoxy. I also remembered to use a little to fix the vent clip I broke.
Then I moved to the interior of the car to add my little fuse box and start wiring. I put it right on the drivers side kick panel, and I ran constant power to it so I can have the fog lights on when the car is turned off. However, if I ever want to change this in the future, I only need to change this one wire to the fuse box to accessory power and that will switch the whole operation to only be on when the ignition is on. So that’s a simple change if needed.
Wiring. I’m terrible at this so you’ll get no instruction from me, but here’s the wiring diagram so you can do it yourself. I also have another video explaining this more in depth if you want to check it out, the link is in the description. It’s not terribly complex but it’s time consuming and I hates it. Anyway, I wired everything up from under the car, mounted the relays on the strut tower, then wired up the switches inside the car, and oh, don’t do what I did. I got all the wires ran and connected but forgot to feed them through the nut that goes on the back of the switch and holds it in place. So I had to unplug everything and re-do it.
zip tie the wires .
Now, these are $13 dollar lights from eBay. Will they last? But if they ever fail I'll let you know. Next video we're going to finish up the mods and maintenance on the Saturn Daily Driver and then we're installing a new clutch in the eclipse.
i've installed 4 of these, the quality is pretty much 2 weeks in every day use. then they burn out.
djxearo it only lasted 2 weeks? Dang lol sucks
SAME! had a couple, worst idea ever..
Don’t waste your time on Chinese shite ! And messy BS wires. Opt7 - Much easier and way ($45) cheaper >>>>> ruclips.net/video/HEnSIxZVF3U/видео.html
You should use long life product,some price don't have high price.Some are expensive，but High parity,extend the span.
these are fog time only.. use LED TUBE instead of you want a quite longer time..
I've been watching this video non stop for days on end. I just bought the fog lights... Might have to pay someone to install though.
I love how the buttons show which angel eye feature you're using. From what I gather...
I only saw one button which was the ring, and it was the ring on the outside. Great job and great video! Thank you 🙏🍺
Am I the only guy who spend more time finding my tools than actually doing the job ?
I share a house full of girls and i just noticed how scrambled my tools were.
Your not alone
Yout not alone bro..
Average time 1hr for a 10mm... But i easily found a 9mm and 10mm when I couldn't find them last week lol
My wife like to "clean up" and I spend most of my time looking for stuff/tools then actually doing the install
i had a 1998 sl2 saturn that got 30 mpg everyday every week..i hauled 2x4x16 boards from the lumber yard with no issues, paid 50 bucks for a set of 4 tires that lasted me 3 years and put a 96 dollar exhaust on it..that's it in 3 years..damn fine vehicles!!
The futurama clamps nod was appreciated
Very much so
That made my day
Bravo on the Futurama reference
"THE CLAMPS!"
Those old Saturns are badass in terms of reliability. Great wagon
Yes, what a good video I liked it a lot I think that just as you explain in the video that is how everyone who is going to install something in their cars has to be, the only thing missing is to show how the lighting looks on the road and on the wall excellent video Greetings from Honduras
Firstly loved watching your vid. Be honest though everybody. What do you expect from $13 Ebay lights???? Your cars are 12v but when running your car is pumping out nearer to 14v. Hence BOOM!!! bye bye lights. Especially if from China lol. Once again great vid. Was nice to see how they looked working.
If you install a resistor or something to lower the voltage then they should last!
Exactly right Kody
There are no $13 they cost $116
What a GREAT video on the DIY! Very well thought out. Helpful. Best one I've seen in a long time. Now all I can think about is getting some Yellow Fogs and installing the hell out of them!
I love watching your channel! I have a 93 eclipse track built which is also my daily driver and I have a 92 eagle talon tsi that I just finished rebuilding, all I have left is to get a new ecu and ecmlink from ecmtuning and it will be complete!
B Rad Smitherz : Sounds like fun. I subscribed to your channel just in case you decide to post a video about them. No pressure, though. YT doesn't pay small channels.
Strapped these to my ae101r 5 weeks ago, still great today. To be fair, i havent actually used the fog lights in fog yet, but the angel eyes are great.
Awesome video, those seem to be some great looking halos for the price. And I like how the switch is also a Halo lol
i love the reading of the box specs haha chinese gotta love em 😂
I bought these cheapo lights then swapped the halos for rings that are color changing using a blue-tooth app. The swapped halo "bulbs" were twice the cost of the full map assembly but they look good.
That's dope af.i bought the purple ring led i cant wait to replace my factory ones
2:43 It BASICALLY LOOKS STOCK!*
* Some restrictions apply. Requires unspecified levels of squints, and not noticing rough edges uneven cuts and general deformity. May cause mild disappointment or death. Ask your doctor if BASICALLY LOOKS STOCK is right for you. Offer void where restricted or prohibited or unrestricted or not prohibited by law.
Hahahaha I wish I could add that voiceover line back in!
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Came across this video by accident. I'm currently looking for some fogs to install on my 97. Was actually thinking of doing something similar to this but I want to use some lights from auxbeam or something. Was thinking 4" but it's going to be too big. Nice vid!
I love how you use anti vandalizing buttons in your own car
I put Morimoto Bi-Xenon projectors on my Saturn. I can flip a switch and they go to the brights.
The ONLY Saturn customized in the galaxy
Haha, I bought 2 sets of these, one of the halos lasted like 1 hour.
Good thing I'm seeing these comments
Probably because the LED's overheated and burned out. Most LED's have a Heatsink connected to the back side of the module
Was planning on getting some of these halo fog lights but if they go out within 2 weeks of use then they are garbage. During winter in Central California, it gets really foggy. Will just pick up some oem fog lights and throw some quality led bulbs in.
I saw you in Bugford on Rev'd Up.. on Velocity.... just now. . Pretty Cool!
Yeah, I saw that too, it was cool they had it on! Terrible show though, it's soooo bad lol
Velocity Labs yeah it's the only show on velocity that I don't watch regularly...I was flipping
I have had exactly same ones and one stopped working after around 6 months...they looked great though when they both worked
Give it the clamps!
You should have just use one switch for the fog lights, and wired the halo relay to the “ignition on” or the “running lights”. You made it more difficult and are going to end up with a dead battery
You make amazing videos. Keep up the good work and the subscribers will flood in!
When your fog lights are better then your headlights is when you know you got a old car.
When your fog lights are better than your Saturn...
I have these and they lasted 2 weeks the halos are good the dogs are not 1 is already out.
7:43 That's what I was worried about when I talk about it at the end. I'll make sure to keep this pinned, if anyone else has experience with these post it up!
I bought this for my Volvo 855 T-5R front. I hope they last longer than 2 weeks.
Micke A , just install a 150 or 200ohm resistor on the leds power cable. Problem solved. Maybe its not that bright, but it will last for a couple of years.
Rui Lima, which is better? 150 or 200?
I changed mine 4 times with warranty. Halos lasts about 1 month. Finally I opened them and fixed circuits
This is an impressive install
beautifully done, BUT! These are "speed lights" and not "fog lights". Speed lights generate a "narrow" light projection in a sense that it concentrates the light into the "horizon" (far away ahead on the road); while Fog lights spread lights horizontally, and not supposed to go above the bumper height, because if it goes above it in a sense of "crossing" the way of the driver's vision, it will burst the white of the fog (creating a "halo") thus, the driver won't see the road. Fog lights usually use vertical-striated lenses but it might also has vertically-striated concave mirror. (But the striation in the lenses is more effective.) And the light bulb must contain a deflector system (usually a tiny metal shield in front of the lamp.) to avoid the light going above the bumper height for two reasons: one, to not burst or flare back the for; two, it can be used permanently, without harming other drivers' view.
Speed lights are better if installed above the bumper (the farthest from the ground as the local laws and regulations would permit) and Fog lights are better if installed below the bumper (the farthest from driver's eyes level in a way the projection doesn't cross one's view, therefore, the lowest as the laws of Physics would permit (impossible to stick the lights under the asphalt). If, for any reason, the vehicle goes on foggy places where the driver must also pay attention to what is coming above, like "ceiling in a tunnel" or "animals on the trees", then the fog lights must have the deflectors mounted upside down, and they must be installed the highest as possible as both local and Physics laws would permit: roof lights.)
Other than that, I totally appreciate the quality of the work presented in this video. Good looking finished result on the dash board.
I just purchased a new Scatpack widebody Challenger. The car does not come with fog lights, where fog lights typically go the widebody Scatpacks have closed off grills for the inter coolers and trans coolers that are not included in non-supercharged Challengers so I plan to do the exact same mod. I would like the halos a bit lower light level might add a resistor so it matches my existing headlight halos and curious about the Color of the fog lights in Kelvin, they look like 5000's my Stock HIDs are 4300 I believe but might be changing those bulbs to 5000's so they will match in color.
Please let me know if those are still working. My stock HIDs really suck especially in the rain. I really was planning on spending a whole lot more on set of fogs but really like that setup, even the switches look awesome, If these are a no go I will look at Hella or Lumen but these look like a great deal.
Nice!!! The fog lights part still work, but one of the halos flickered out and stopped working after about a year.
Oh wow . Those are pretty bright
Ive had them on ma car for 5 months now
Water inside, still running. Thats only the angel eye, since i never use the fog light part
Are there with drl?
3:00 watch him put a scratch in the bumper with the screwdriver
FT I doubt that he cares about it. A car like that I would probably careless too
Lot of scratches around the bumper but this isn't a major problem...
I've been installing all kinds of leds light's on different car's and i will say this you get what you pay for. These cheap brands all fail to soon!
Looks like a Spaceship! haha nice
How the lights are holding on?
I'm curious too!
I've fitted a few set's of these you need to unscrew the halo ring off the front of the lamp take the lenses of the rings and fill with clear silicone around the led rings 're fit lenses problem solved !!!! Keeps the wires on the back of the rings and keeps the water out.
Might do this on my frontier!
Love your vids! Quality over quantity!
The halos looks cool and all but i don't know about putting them on a saturn. But thats only my opinion.
I may want to do this on my 2014 e350 with led lightning package. The fog light switch is already there as they moved the DRL from bottom of the bumper into the headlights..!
Amazing video!! Gave me a great idea for my semi commercial truck and to fill the blank on the bumper!! Great detailed info man.. thank you so much!! 💯👌🏼
Daaamn. .. Those are bright.... Noice work!
I saw that! You scratched the paint with a screwdriver!
This is sacrilegious
I just can’t say what I want to. 😂
Oh what the hell? Why not?
“HEY DUDE”! “THOSE $13 LIGHTS ARE WORTH MORE THAN YOUR WHOLE CAR!” 🤣🤣🤣🤣🤣🤣
Putting *lit* rings on a Saturn. $13 from ebay. Nice.
So how long did they last ?
One of the halo's crapped out after a year, the regular fogs are still going strong though.
I bought these along with a 12V dynamo for my mountain bike :P if I can't get it to work I'll put them in my car.
Yo compre unos parecidos, pero estos vienen con un controlador LED. Al instalarlos y probarlos con el motor apagado, todo funciona bien. Pero si enciendo el motor, pasa unos segundos y se apagan y no vuelven a prenderse.
I bought similar ones, but these come with an LED driver. By installing and testing them with the engine off, everything works fine. But if I start the engine, it passes a few seconds and they turn off and don't come back on.
Just wondering, why didn’t you wire the halo to the headlights and the foglights to the rear fog lights?
I have some and I’m wanting to put them on my 99 s10 blazer. I just have one switch for them both and will the halos and the main fogs turn on with that? I mean I don’t see why not
Very helpful, thank you ! Greetings from Chicago !
Do I need 2 relay for the project?
CLAMPS?!?! Too good man😂😂
How to order and how much- how many is the wattage?
I noticed on mine that the halo wires aren't sealed in any way. There's a big hole that i plan on sealing with some silicone before i put them on
I've had them on since then and they're still functional and nothing is broken. Though I did notice that the beam pattern is more like a flood light albeit a very weak one. It's equivalent to taping flashlights onto your car. Halos look cool though.
Name of the music in the background
Yeah yeah cool and everything but the great question is does it works? I mean really light up? or are they just aesthetic?
Aesthetic. I have them
I can't do this on mine, it's a 95 SL2. It would look better on mine if I installed them in the middle grill that I modified to look like air ports.
I these lights but they came with out the relays, how do I connect without the relays
Thabo Sono is you don’t use a relay and a fuse you’re more likely for your wiring to melt and brake and possible fires can happen
great channel man i like the dsm videos being a dsm guy myself =)
Can those lights fit any type of cars?
That’s a bright idea
So there's a power for the LED ring and a separate power for just the fog light? I just ordered these for my Civic and I'm trying to figure out how to wire them. So then are the other two grounds you have to ground out the fog light separate from the angel eye ring?
Hey I put these halo fog lights on my Mini Cooper today and now the car won’t start??? Please help, I checked every fuse and still won’t turn on
hey man. you should keep doing what you do. very informative. 4.20/5
very informative and to the point, thanks!
Did it last ?
Looks great. Love your vids.
thanks you the for help i am putting them in my 2g
Are you going to be upgrading the headlights as well, so the light color matches?
I had a set of these that I literally just took out of the box and out of intuition I tested them with a 9v battery for defects and to my shock they didn't even last 30 seconds and the SMD Capacitors started to smoke before the LED's burned out. WTF!? I can only imagine what would have happened if they were plugged into the cars wiring. Can someone chime in? How can something like that be allowed onto the market? Or did I somehow get a bootleg copycat version that had no quality control?
Which size did you get vs the size the body was? Also how is the life span of these?
no output pattern?
Quality parts on a quality car! haha nice.
That was "tight" 😎
Quick question what size of Halo lamps are they and what's the water on them?
Hello, can you install the lanterns without placing a relay?
How much is the price for two fog ligth?
Can I change the middle inner bulb of the projector ??
"Hooh-leee-sh*t that looks awesome!"
Nice
I just got a set ordered got my car
Are they still lasting of dead ?
I’m trying to install these onto an escooter without tapping into the power source. What kind of battery did you connect to at 4:21 into the video?
How bright are they?
Can you do sequential taillights for a Chevy suburban?
Some led headlight bulbs would work well too
Your editing is top notch! What program do you use?
Premiere!
Velocity Labs Nice! I use the same program but I am new to it. I really enjoy your editing skills! My favorite was the demo of the turning radius of your car when you put coilovers on it!
Nice light
would love to see the light ouput and pattern. thought you would show it. please do next time :)
Good idea, I'll add that to the next video!
+InBoostWe Trust If these Halos are like the other cheap units for sale on Ebay, they have very little light output and are for decoration only. Sorry to hear about the 2 week service life. Not worth the effort to install these lights.
They're just for aesthetics. The ring light is lighter than the inner bulb
Looks nice! I'm trying to find some LED lights to install on my 2009 Hyundai Accent as fog lights as my model never came with them, but the panel the fogs mount to is one huge, completely different plastic panel in the non-fog cars, compared to the models WITH fogs....hard to know where to mount them! :(
That's simple, mount TWO in each panel then! Or get a bigger size fog light!
Part of the problem is that they won't mount flush as the panel is rippled.
i.gaw.to/photos/1/0/10138_2009_Hyundai_Accent.jpg?1024x640
They would go, in factory form in cutouts in the corners of this bumper and are installed in that huge black plastic piece. I'd have to replace that entire piece if I wanted to go for a factory-style mounting location. I could mount lights there, but I am just not sure how they would look on the rippled plastic...trying to find lights that wouldn't look tacky is the issue, haha!
@@OdykKayne I wonder if you figured that one out since then. I am dealing with the same issue, having bought the Angel Eyes fog light and figuring out how to get the right wire and stick the thing in front of the car. lol
@@Eric-zq6sb I ended up buying a OEM-style aftermarket foglight kit :)
@@OdykKayne Nice! I'll look this up.
Where can I find a hid headlight projector assembly with ballast and lights? For 1998 Impreza 2.5 rs
Nice video but how long did they last?
The clamps. Futurama?
Did you do a vid for logo welcome door light....that be cool to see
Saw halo *immediately assumed halo master chief*
Do the projectors have a cutoff shroud inside?