hey I’m 14 turning 15 on 20th march and I want to say thank you so much I replaced all my buttons to matt black and it wasn’t very hard to do but it did get complicated sometimes it took me 1 hour and 52 minutes and I had so much fun doing this. Thanks again :)
Hey man. Just a little trick I figured out with auto focus cameras. If you put your other hand behind what you're showing it'll focus up faster. Then a little movement on the piece will tell the software that is the primary focus point and it'll snap to it. Cheers
I used this video as a guide for me to swap out my controller shells, worked like a charm! One quick tip for everyone. The T8 screws have a pin in the middle, so you’ll need a bit with a slot for that pin.
Thanks for the vid. My buddy's 20th Anniversary Halo Infinite controller died and this helped me transfer the shell and buttons to a working controller. Thanks again.
to anyone scared to mess up their controller, you arent going to mess it up 😂😂, i literally dropped it on the floor while putting in buttons, and it didnt break
Will update when I try this(: it’ll be my first time opening a controller, thank you! This has made the process seem a lot less scary and I’m using the same color scheme(;
Thank you so much for uploading this video. It's really helped me to sort out my controller which was kind of delapidated. So I've done a full custom upgrade with buttons, sticks, triggers and shell. Thank you very much😊😊😊
Thanks to this tutorial I’m having to buy a new controller. A little metal piece that you don’t show or mention in the video fell out, I have no idea what it is or where to put it I’ve tried looking at other videos, I’ve tried looking at diagrams, I have tried absolutely everything, I’ve even asked on Facebook and reddit! Now my Xbox remote is now totally useless 😁! Thanks !
For anyone struggling with the left antenna... Sometimes it's keyed, so either crack out a magnifying glass/microscope, or just push it around until it clicks in place.
another thing to watch out for is, when tightening the green board over the buttons, dont fasten it hard, only do it enough to keep it in place, dont tighten till you cant anymore
I'd imagine you can just use a faceplate from an older controller to cover the gap. Actually going to do this later today so I'll try to remember to comment if it worked as I hope.
Hey Marc, we actually recently tested this per your question and they do not. They fit fine, but when you put the controller back together the "x" button sits too low on the controller. You could get away with it but it just doesn't fit exactly the same way. Hope this helps!
Great, in my taste I would just have changed the buttons, maybe the analog sticks, but the original d pad looks better whit his new design imo... btw I wanna ask to you vuys if you have faced problems whit an xbox one s controller not registering A button properly when pressed on certain angles, and if you found a solution for this, thanks in advance!
Understandable I completely agree, changing out the D-pad was mostly just for showing people how to do so. And to answer your question about connection problems, we haven't had any issues, but with any controller after some wear and tear that type of problem is pretty common. Thanks for the feedback!
I love how they have not changed the controller at all. I used to customize these in 2016 and internally they're still the exact same as the standard xbox one controller
@@Gamenetics Yeah! I have loads of xbox one s controller shells in my bedroom, I've just ordered a bunch of hydrodipping stuff, going to have some fun with them this weekend!
The process is almost identical, we have an older video for customizing the Xbox One S specifically. It's an older video, but here is the link: ruclips.net/video/sOIx3aluVLQ/видео.html
@@Gamenetics He said Series S not One S, i belive The Series X and Series S controllers are the same, u could say the Xbox Series S uses a Xbox Series X controller.
I ordered the magnetic anologs for the Xbox series X controller when I added them my left trigger stopped working because of the magnet at the base of the anolog base your stick connects to
It looks like an Xbox One style D-PAD for Xbox series controller. Where do I find one of that? The Amazon link doesn't direct you to one of that model. I really an Xbox One style D-PAD, 'cause the I find the new one terrible for fighting games.
4:56 WARNING. He says its gets exciting, my connector here broke off and is unable to re-attach. be VERY VERY careful!!!!!!!!!!!!!!!!! thanks for the warning....
my back hurts from bending over on my floor doing this I’m getting to old to be doing that and I had to use tape on my tools cuz there bad also I broke one of the wires on the motor which I didn’t care about because I don’t use vibration anyways.
@@Gamenetics I was walking around drinking tea since I'm sick and had a delayed sneeze/cough and it just magically went into my controller and now all the buttons stuck. I thought I wiped it up in time 🙁
@@Painbowz yeah since I was new to Xbox and purchased the Xbox series s , I have a year warranty on the controller so all I had to do was contact Microsoft and send the controller back through ups and they gave me a new controller
my d-pad (on several controllers, including new ones) goes bonkes. right is down, down is up, etc. This makes my console unplayable All my controllers are in mint
Well ObeySelfMade we appreciate your input and I'm sure your full of controller knowledge but I will respectfully disagree about the side plates, I will say the camera was a little shaky and we were having a auto focus problem but has since been fixed. Thanks for the feedback.
hey I’m 14 turning 15 on 20th march and I want to say thank you so much I replaced all my buttons to matt black and it wasn’t very hard to do but it did get complicated sometimes it took me 1 hour and 52 minutes and I had so much fun doing this. Thanks again :)
Hey man. Just a little trick I figured out with auto focus cameras. If you put your other hand behind what you're showing it'll focus up faster. Then a little movement on the piece will tell the software that is the primary focus point and it'll snap to it. Cheers
I used this video as a guide for me to swap out my controller shells, worked like a charm! One quick tip for everyone. The T8 screws have a pin in the middle, so you’ll need a bit with a slot for that pin.
It's called a T8 security Torque screw but/screwdriver a standard T8 torque screw bit/screwdriver won't work.
You can also break the little pin with something thin like a small butter knife
Thanks for the vid. My buddy's 20th Anniversary Halo Infinite controller died and this helped me transfer the shell and buttons to a working controller. Thanks again.
to anyone scared to mess up their controller, you arent going to mess it up 😂😂, i literally dropped it on the floor while putting in buttons, and it didnt break
Will update when I try this(: it’ll be my first time opening a controller, thank you! This has made the process seem a lot less scary and I’m using the same color scheme(;
did you ever try it?
Good job. I was considering changing my buttons, but you just talked me out of it. 😆
Thank you so much for uploading this video. It's really helped me to sort out my controller which was kind of delapidated. So I've done a full custom upgrade with buttons, sticks, triggers and shell. Thank you very much😊😊😊
Great vid! Now I got my golden buttons on my black series x controller! 🔥
Thanks to this tutorial I’m having to buy a new controller. A little metal piece that you don’t show or mention in the video fell out, I have no idea what it is or where to put it I’ve tried looking at other videos, I’ve tried looking at diagrams, I have tried absolutely everything, I’ve even asked on Facebook and reddit! Now my Xbox remote is now totally useless 😁! Thanks !
Very informative and extremely well made. Thankyou
For anyone struggling with the left antenna... Sometimes it's keyed, so either crack out a magnifying glass/microscope, or just push it around until it clicks in place.
This video helps me a lot
another thing to watch out for is, when tightening the green board over the buttons, dont fasten it hard, only do it enough to keep it in place, dont tighten till you cant anymore
keep up the ggod work!!
Thanks my dude really helpful
Video is great but pls check the camera is actually focused next time. But the vidro was the best tks allot
Do you know if a company like Best Buy could do this? Im tryna swap the dpad for a regular xbox one dpad, easier for fighting games.
Thanks for the Video, I just wanted to "silence" the XYAB Buttons, because they are way to clicky/ sound cheaply.
Is there anyway I can change the triggers and bumpers from the series x controller to the xbox one trigger and bumpers
No different shell shape
Got it thanks, ended up getting a elite controller and just using trigger stops
@@isaiahpardo7955 ah nice I’ve got the elite series 2 but my right trigger has snapped off so I’m trying to find a new cover for it
is there any way to make the buttons less clicky and loud? cuz the dpad especially is loud AF
I also want to know... I rarely use D-pad but the mash buttons (ABXY) are also very noisy...
What do I do if those little cables you have to disconnect the connector piece on the board comes off with it?
I like the dpad but don’t like the idea of having a massive hole around the sides of it
I'd imagine you can just use a faceplate from an older controller to cover the gap. Actually going to do this later today so I'll try to remember to comment if it worked as I hope.
Great video 👍
I like how your "pry" tool is a dab tool 🤣
Are the A,B,X,Y buttons on the series x/s the same as the xbox one buttons?
Hey Marc, we actually recently tested this per your question and they do not. They fit fine, but when you put the controller back together the "x" button sits too low on the controller.
You could get away with it but it just doesn't fit exactly the same way. Hope this helps!
Yes thank you so much for testing this for me
Thank you I had to open my controller up like 12 times because I keep forgetting to place something in I also broke the vibrator 😢
Hey no problem! Hopefully you straightened everything out and everything is running smoothly!
One of the easiest controllers I’ve opened other than the GameCube
Can you use a regular Xbox one d-pad ? In that controller do you think?
You should continue to say "guys" after every single sentence.
He should go ahead and do that, guys
how would i go about replacing the triggers?
Great, in my taste I would just have changed the buttons, maybe the analog sticks, but the original d pad looks better whit his new design imo... btw I wanna ask to you vuys if you have faced problems whit an xbox one s controller not registering A button properly when pressed on certain angles, and if you found a solution for this, thanks in advance!
Understandable I completely agree, changing out the D-pad was mostly just for showing people how to do so. And to answer your question about connection problems, we haven't had any issues, but with any controller after some wear and tear that type of problem is pretty common. Thanks for the feedback!
I love how they have not changed the controller at all. I used to customize these in 2016 and internally they're still the exact same as the standard xbox one controller
Yeah nothing really changed the PS5 controller definitely did slightly, the Series X in general, the complete design hardly changed.
@@Gamenetics Yeah! I have loads of xbox one s controller shells in my bedroom, I've just ordered a bunch of hydrodipping stuff, going to have some fun with them this weekend!
i wanna do this cus got all the parts but heavy handed
You can use Xbox One Controller ABXY buttons on Series Controller?
Do you actually need a T6? Only ask because other parts say that you only need T8
pov : a six year old looks at this video RIP CONTROLLER😢
where can i get triggers from??
I’m a little late to the video but could I use a flat head screwdriver as a pry tool
Yes you definitely could.
The red and black chords connected to the roller parts in the left handle detached 😢
Why can't we rip the sticker off?
how can you customize the mechanics of the trigger? make it a shorter pull or make it tactile
They are security torques
does this work for xbox series s controllers too ?
The process is almost identical, we have an older video for customizing the Xbox One S specifically. It's an older video, but here is the link:
ruclips.net/video/sOIx3aluVLQ/видео.html
@@Gamenetics He said Series S not One S, i belive The Series X and Series S controllers are the same, u could say the Xbox Series S uses a Xbox Series X controller.
Does the controller still work well?
Yes! A lot of what makes the controller functional properly after customizing it, is the quality of the parts you're using.
Can I do it on series s
Hey man great video , do you know if the Xbox one Controller dpad would fit in the series x controller
nope , different sizes
Can xbox one buttoun countroller work on xbox series x countroller ?
I ordered the magnetic anologs for the Xbox series X controller when I added them my left trigger stopped working because of the magnet at the base of the anolog base your stick connects to
Can i use xbox one thumbticks on my xbox series x/s controller?
Where can I buy new dpads, when I look on Amazon it say Xbox series x2 is that compatible for Xbox series x
found one? ive been looking for a dpad with 4 directions instead of the regular 8direction and cant find anything
I followed the whole guy to it to you, but now my controller won’t turn on
Are the a b x y buttons all interchangeable or do they come as one piece
They are only going to fit in their own separate slots. The B button for example is bigger than the other three buttons!
@@Gamenetics soni can I have a red B button and a green Y button they don't have to be all purple from the one set like yours
@@albertbertaton8014 yes
It looks like an Xbox One style D-PAD for Xbox series controller. Where do I find one of that? The Amazon link doesn't direct you to one of that model. I really an Xbox One style D-PAD, 'cause the I find the new one terrible for fighting games.
I believe you can just search them on Amazon and you should find what you are looking for!
i followd all the steps now my conrtoller is drifting ?
What kind of screw driver is needed?
If you watch the video he tells you...
When I get it
This is such a hard process compare to taking off ps5 controller, jesus
4:56 WARNING. He says its gets exciting, my connector here broke off and is unable to re-attach. be VERY VERY careful!!!!!!!!!!!!!!!!!
thanks for the warning....
Dude.. I did everything EXACTLY like you said and now my damn controller won’t turn on. WTAF?!
SAME
You figure out what the problem was??
@@YvngKing-co3bn check the silver things are poking out for the battery on the back
my back hurts from bending over on my floor doing this I’m getting to old to be doing that and I had to use tape on my tools cuz there bad also I broke one of the wires on the motor which I didn’t care about because I don’t use vibration anyways.
yeah, same, i broke the black wire on the right, and red on the left, and i never used vibrate, so i didnt care
@@matlix224 me too
@@slitzworld but it was worth it tho
@@matlix224 me too I have plenty of controllers anyways
Do you need the label?
Absolutely fuck no am I doing that
😭😂🫡
Would of been cool to do if I didn't break my controller
Oh no! I'm sorry to hear that. What happened?
@@Gamenetics I was walking around drinking tea since I'm sick and had a delayed sneeze/cough and it just magically went into my controller and now all the buttons stuck. I thought I wiped it up in time 🙁
@@Gamenetics but I'm a new xbox owner and only had it for like a month now and brought warranty so I think I'm Eligible for a controller replacement
@@thelowkeyspy any new updates about the situation
@@Painbowz yeah since I was new to Xbox and purchased the Xbox series s , I have a year warranty on the controller so all I had to do was contact Microsoft and send the controller back through ups and they gave me a new controller
my d-pad (on several controllers, including new ones) goes bonkes. right is down, down is up, etc. This makes my console unplayable
All my controllers are in mint
my screw driver broke :'(
How do you know everything about taking these apart inside and out but don't know what the Rumble motors are? Lol
"mechanisms" 😐
Deffo not doin that to my controller.
i'm not doing that
Dude this shit was so blurry half the time I couldn’t even see what you were doing
Not a single point of focus was found in this video
What are the thimb sticks u didnt post link
They’re aluminum thumb sticks, you can search em on amazon
You go way too damp fast!
So blurry
learn how to focus
Your not showing much
g u y s
You camera is so bad
Does he not realise it's an Xbox series S controller
Most of the video was blurry and that's not how you remove the side plates...
Well ObeySelfMade we appreciate your input and I'm sure your full of controller knowledge but I will respectfully disagree about the side plates, I will say the camera was a little shaky and we were having a auto focus problem but has since been fixed. Thanks for the feedback.
@@Gamenetics it wasn't blurry Dont worry the quality was great