Please do! All the best, just keep in mind it's very sensitive project, which means if there will any imperfection then you will have to work on that part again.
Sir, I followed all the steps as you told and everything is working fine on my software. But my machine is not working at all. There is no movement in it.can you tell me where I made a mistake ?
No you can't use Arduino board supply to power stepper motor otherwise it will blow Arduino voltage regulator IC, you can use mobile charger with 10W or more rating.
No, actually it's like z-axis is pan holder motor, which move pan up and down, x-axis is parallel to your device top screen means controlled by motor near to Arduino board and y-axis is controlled by motor down at the pad.
Hello sir, I also make this project according to the instructions you gave in the video but I am facing a problem that the Z axis motor works only in one direction and not in the opposite direction, I want to make the Z axis I also try to change the output of the motor. Sir please help me
Sure, don't worry we together resolve this issue, but for that you need to share a video of your setup where we can explore the issue, you can share it on our mail Id hakseengineer@gmail.com
Here z-axis is pan holder motor, which move pan up and down, x-axis is parallel to your device top screen means controlled by motor near to Arduino board and y-axis is controlled by motor down at the pad.
Sir Mobile connect nhi karsakte hai kya agar mobile se command dena tora easy rahe ga kuch upaye hai toh pls let as know We are aslo Hakse your 😂subscriber
First of all thanks for being Hak Se Subscriber of our channel. Yes it's very much possible, for that you need to use ble module to stream gcode from phone to Arduino, you can explore more about it from below link, github.com/zeevy/grblcontroller
Awesome work!! I am definitely gonna try it👍
Please do! All the best, just keep in mind it's very sensitive project, which means if there will any imperfection then you will have to work on that part again.
@Hak_Se_Engineer Yeah sure... I'll take care of it🙏
can it draw a full a4 image?
No, just because of the plotter size otherwise with some modification it's very much possible.
Sir, I followed all the steps as you told and everything is working fine on my software. But my machine is not working at all. There is no movement in it.can you tell me where I made a mistake ?
Are you using external supply?😊
Better share some image or video of your setup, you can share it with us on our mail Id hakseengineer@gmail.com
9v which ampere?
5v/2A will be more then enough for this project
@Hak_Se_Engineer so can i run it with mobile charger?
And is it compulsory to supply power or it can be run from Arduino USB Cable power
nice project
We are glad that you like it, please checkout our other videos as well.
helo bra
Can you write text with this device??
Or just painting?
Hi bra...😊
It can write but not much clear because it does not have that much high precision, so better to use it for drawing only
That use of word " dashamlav " was awesome
Hehe 😊
so can i run it with mobile charger?
And is it compulsory to supply power or it can be run on Arduino USB Cable power
No you can't use Arduino board supply to power stepper motor otherwise it will blow Arduino voltage regulator IC, you can use mobile charger with 10W or more rating.
X pen Holder motor
Y vertical lower motor
Z edge motor
Right?
No, actually it's like z-axis is pan holder motor, which move pan up and down, x-axis is parallel to your device top screen means controlled by motor near to Arduino board and y-axis is controlled by motor down at the pad.
Bro is Arduino mini CNC 2 is upgraded version of it?
Sorry bro what you mean by CNC 2...we didn't specify it anywhere..
@@Hak_Se_Engineer bro one Last request 🙂
From which website do you bought the components
Bro what's the name other components with motor please reply
Brother that is ULN2003 motor driver, which comes with 28BYJ-48 Stepper motor.
@@Hak_Se_Engineer thanks a lot brother
When you gonna making a bigger one
Will see.. currently working on some other creative projects🙂
Very useful
Thanks, Please checkout our other videos as well.
Bro screw kis size ke lagaye pure setup me
Hi buddy, screw size were as follows,
3x6mm - 6pc
3x12mm - 4pc
4x12 - 2pc
Hello sir, I also make this project according to the instructions you gave in the video but I am facing a problem that the Z axis motor works only in one direction and not in the opposite direction, I want to make the Z axis I also try to change the output of the motor. Sir please help me
Sure, don't worry we together resolve this issue, but for that you need to share a video of your setup where we can explore the issue, you can share it on our mail Id hakseengineer@gmail.com
Can draw a4 size paper
Not with current hardware size, but it can be extended to work with A4 size.
Makes on A4 size plotter
All parts link
Oi o motor z e o da caneta?
motor x e o que vai e vem da caneta?
Here z-axis is pan holder motor, which move pan up and down, x-axis is parallel to your device top screen means controlled by motor near to Arduino board and y-axis is controlled by motor down at the pad.
Sir Mobile connect nhi karsakte hai kya agar mobile se command dena tora easy rahe ga kuch upaye hai toh pls let as know We are aslo Hakse your 😂subscriber
First of all thanks for being Hak Se Subscriber of our channel.
Yes it's very much possible, for that you need to use ble module to stream gcode from phone to Arduino, you can explore more about it from below link,
github.com/zeevy/grblcontroller
Oi o esquema de ligação x, y e z eu sou novo na área.
Can you please explain what you want to say in English, because even after translating it I can't understand what you mean.