DIY Mini CNC Engraving Machine | Arduino based CNC Router machine
HTML-код
- Опубликовано: 3 окт 2024
- $2/5pcs 2Layer & $5/5pcs 4Layer PCBs: jlcpcb.com
Hello friends in this video I have made a mini CNC engraving/milling machine. this machine based on arduino and GRBL firmware.
12mm plywood is used to make the frame of this machine and nema17 stepper motor is used for all three axis.
8mm smooth rod & T8 lead screw is used for all axis
500W spindle is used which is quite enough for this job.
I have tested it on wood, acrylic, and PCB it works well not tested on alu. but shallow cuts with high quality of endmill done the job I think.
All the dimension details of machine and components list available on my website please visit below link.
electricdiylab...
How to generate G-code for this CNC machine
• How to generate 3D Too...
#Arduinoproject
#CNC
💻visit for more projects :-
👉electricdiylab....
👉FB page :- / innovativemr This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects +91 7600079068 
Наука
Nice! I did the same with 3d printed parts 4 years ago, then I changed to 30X30 profile aluminum. I havent used since two years ago due I wanted to add a camera, I tested on april with good results.
wow, parabens esse projeto e incrivel, sou brasileiro e ja tentarei compra as peças
@Luiz Fernando Valeu pelos arquivos...estava começando a revisar também e vi seu comentário. Me diga uma coisa,chegou a montar a CNC?
You are the true inspiration for the upcoming engineers ..💗💗💗
Sandeep, you made a awesome cnc. Mind blowing.
Nice job, man, very similar to what i'm building. By the way, you shouldn't mount the lead screw directly on to the motor shaft,
because on higher loads you might have acuracy problems. 👍
Respectable sir please make a separate video about grbl, and the software and interface and setting position,home for a cnc milling machine, i couldn't find such video anywhere else please please 🙏🙏
me too 。plese
Very cool! A shame, that the work area is very small, although it is for small things. Thanks for sharing.
Молодец! Очень хорошо. Tres bien!
Very fine traces on pcb for a wooden cnc
Great video i understand now how works all! now gonna try
Bro this is the best and most neat CNC build video...keep it up
By the way where did you learn all these skills?
This setup might be suitable for cutting vulcanized fiberboard pieces of guitar pickup flatwork if a low-power cutting laser was used instead of a router head. Even with very fine bits, there's tear-out even with very small, very sharp cutters. Fred Stuart has a purpose-built laser cutter for making flatwork that he demonstrated in a video several years ago (maybe 10+), and the flatwork come out beautifully. Preferable to dies and a punch press, given the cost of that kind of setup (only useful for large production runs anyhow). This looks like just the machine for the job. It would actually only need to be 2 axis, X and Y, since the material is flat and not very thick.
Well Done on your achievement!
Super se bhi uper
Finally!!! 👍
Why don't you do a box type CNC? (helps with dust and noise - like my...)
So super nice work and cool content amazing video
Excellent hats off your work
Excellent working and cool content amazing video
Hey Mr Innovative,
Thanks for the wonderful project & the detailed documentation in your website. Could you please elaborate how the PCB milling is made? How to generate the Gcode from Gerber files (or any other PCB design file)?
You did great job you are so innovative..🙏
Nicely done....👍🔥
Can u plz mention the names of all the parts?
And tell us how to make codes?
Good job, very neat and properly planned design!
This is fantastic. Nice work!!
woooooooow i love that one .....that"s super perfect
So super nice work and thanks
Really nice. Though these days, I no longer have the patience to make something like that from scratch. Way bay when I did build my first computer, an S-100 buss machine from scratch.
Muito bom, trabalho preciso parabéns.
Super......👌👌👌 Thank you for uploading my request video..
Sir your video is vere useful for me
Projeto incrível
amazing work bro
Excellent working
Really awesome bro pls make 3d printed same pls bro
How much money you spend to make this Mini CNC machine?? Please tell me i also want to do this for my project .
Amazing work, the pcb part example is mind blowing, did you use it in any of your projects?
Excelente work. Bro can you make a video tutorial to makes the GCodes?
Sandeep, you made a awesome cnc. Mind blowing.
GREAT !! more milling projects please ?
That side action on the cutting disk with no guard could have ended bad... I'm pretty sure that's like the #1 thing not to do with that type of disk. It creates thinner areas midway through the disk which makes it much more prone to self destructing. I'm sure if I was in your position I would have done the same thing at least with a guard and face shield though. I usually just use a file when the material is very small.
Time
You are genius
Cool Bro😍,,,,, !! Are you Indian ??
Nicely done
wonderful project
How much these old dvd player costed you?
My friend can you build metal 3d cnc like this with basic tools
Beautiful my friend!!!
How much did you spend for all the materials? US dollars
That's a clean build! What's the music?
its from yt music library
I used Shazam to look it up:
Groove - Drew Banga (on youtube)
Jeremy Blake - The Emperor's Army (on youtube)
meanmachinedean - smart guy (Spotify open.spotify.com/album/4uigcOlZyZyN927oW95Kn7?highlight=spotify:track:7biWspQi8Qwt7yIxNsgKOM)
@@soupwizard Thank you so much! You're a legend! :D
it's wonderful. How can you do it?
Very nice information...if one need what will be the cost of this build up...
Excellent bro
0:05 that rotary tool is not mounted straight, it's leaned to the right
Good and complete video
Nice job thank you
muy lindo !! pero estaria bueno q se explique su coneccion
How many cost in this project?
Please tell me i want buy or make it,
Where are you from
First!!! Your is so cool!!
Can we made 800×1400 mm cnc with the use of Arduino Uno?
Yes
Excellent Nice work and great ... How much does the device cost please
Great designed😍😍bro how much bigger job we can put in this machine!
no much big but 120 x 120 mm x 15 mm
Place.... software name
You connect the motors to the cnc shield, but what about the mill ?
Impressive !
What spindle u used bro and what collect chuck u used nd bits ....i want all details of spindle nd bits
I want to buy this product, price please
you have to make it yourself
@@cessposter And that's the best part!
where is spindle conection in shield ?
Awesome!!!
Good job
Its really good bro . How did you do its programming?
👌👌👌👌👌👌👌👌👍👍👍 I am sri lankan good potos
I am in need of such a. Device cost effective
Hey, this is exactly what id like to build, but the price of the 500w motor seems rather steep. could i not just use a motor from an old electric drill and a screw on chuck? or would the rpm's be to low?
Nice project !Where can I get a complete Kit to assembly, also how much price ? Can i get it in India ?
great,what software have you used generating G-code?
Maybe master CAM
nice project
Esses trilhos voce pode enciontrar em sucata deTONER de3 impressoras laser eles tem 30cm por 8mm da para fazer um excelete corredor do carro ....
The drill bit installed is not in the center. Shows "out"
Hi,
Thanks a lot, its really greate effort and great knowledge.
i need to do a project for a preset position linear actuator with a DC motor abd a stepper motor, with Arduino Mega or UNO but i am not able to write the code and the scheme, can you please help.
Regards
Which is the current of your NEMA 17?
Amazing!
it can cut or just engraving ?
Sir youn have red angle setting
What's its name or where are you purchased that
How deep can the super fine one go?
Nice video
can you please tell me, which software you can use for pcb milling???
Sir kon sa g code sender app use kiya he.
Which g code sender are you using?
website is blacklisted
Beautiful job. When i look at the amazon international prices of the mateial this surely was not cheap either
Cen we use on metal like silvar?
Can I convert 1610 as working area of 20" * 20" , because of 1610 is having the working area of 4" * 3" only by through this arduino card....kindly reply me....
perfect
Hola buenos días dónde puedo comprar los accesorios para la maquina
Can this CNC machine working on 40 mm Cross wood milling ?
Please make a ceiling fan motor winding CNC machine.
How much spend a money for your cnc machine?
Can this machine engrave aluminum & brass? Do you sell complete machine? Any link?
Hi,
How are you ? Your vidéos on You Tube are very cool !
I have a question for you. Your plan for the mini cnc engraving. I want to try to reproduce it. But I can't read the plan you described. could you please send me a picture because I can't read the dimensions please ?
thanks in advance
Greatings, Guillaume (from Belgium😉)
hi, do you have the measurement for the bed? thanks.
I saw a good video ^ ^
Which application are you using to design it?
Dies it used for graphite ??
Nice