Restoration rusty old air compressor | Restore vintage air compressor
HTML-код
- Опубликовано: 9 сен 2024
- Restoration rusty old air compressor | Restore vintage air compressor
Our next project is to restore an old air compressor. The air compressor we bought at the second hand shop. It still works quite well, but its parts have been rusted a lot. We are not specialists in machinery restoration , so there are not enough tools for the job. But with all our strength we try to improve in the best way. I am happy to receive your feedback, advice, suggestions to improve yourself. I am very sorry that there are unwanted mistakes in the video .
Thank you for watching the video and for us to suggest
Don't forget to subscribe our channel:
/ @therestoration2r878
#aircomressor
#Restoration
#airpump
very nice job. but four things concern me, one the water that came out of the tank, in order for me to use that tank I would preform a hydraulic test in order to validate the structural integrity of the tank. Two I would be cautious of using the old pressure switch, it might work for a bit but would fail down the road, I would end up replacing it with a new one. Three I would never paint the air pipes with the fins coming off the compressor, due that what helps cols the hot air coming off the compressor. And Four I would replace the quick connect couplers with newer ones so I can us them with any newer air hose and tools.
llllll
I agree is this thing just be a big bomb
Anyone who puts hate in these videos I want you to think about how you would feel if you were the person getting the hate. You "adults" need to grow the hell up and stop sending so much hate and start commenting nice things. I guarentee that most of you who comment hate can't do anything in this video or any of the other restoration videos on this channel. I seriously hope that you people learn that nobody cares about all the hate and that you just need to treat others as you would treat yourself. Excellent work. Keep it up. I support you all the way on your restorations!😁
Nice job 👍
I admire the hard work but it seems you don't care about some details and I must agree with some comments about them. Still a good job: you saved an old air compressor, so many years still to live. Thanks for the video.
I rather call that a WASTE of TIME, him doing things he had done and us all watching it...................... lets use real names for real things otherwise we all end up as that poor compressor - artificiall
When he sprayed water into the crankcase I had to cry.😭
To use that compressor is like having a time bomb in the garage.. and the paint turned out ok btw 😉
ruclips.net/video/KVP_A7eGYxw/видео.html
Air compressor explosion safety video footage of actual explosion
@@dhcraft9472 the amount of pressure in a tank like that is quite impressive.. so In my garage that thing would not be "restored" might part it out until a better specimen had turned out with a blown engine or something like that.
@@just_a_norwegian That is how I'm fixing two compressors now. I bought them as new/delivered damage to motor parts but the tanks are undamaged. Silly thing is that the brass fittings which are broken are an uncommon size to find and the manufacture rep wants over £20/$26 for an 10mm x 3/8" compression to male threads which is £5 max part
Good job🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧😍😍😍
Watching that painting hurts so bad 😂
It´s a tool, it doesn´t have to be super shiny.
@@TobiasHinz1992 nope just have to be perfect ;)
its a old ass compressor not a car.
Ikr it was a bit slap dash
And watching the crappy water running on the floor...😸
With well over a million views somebody is doing something right. I for one enjoyed it.
We are not experts in the field. There are many errors in the video. Very need your advice . Thank you
Painful to watch...
Why
@@cereal_qilla Because it's an obvious looking death trap restored into a disguised death trap.
another expert :D
@@GGigabiteM the rust was just surface rust if you open any new compressor tank nowadays imported from China they have as much rust inside their tank as this one had on its outside ! But the paint job was awful just a fews can of spray paint would have brought it to the next level ,spending so much time in taking it apart and ruining it at the end , also probably a new set off new cheap bearings would have made it quieter !
@@1badpete999 what does the rusty interior do ?
Good Work😀
Rusty pressure tank ... what could go wrong?
If you think that was rusty, you haven't seen rusty oilfield gas pipeline that hasn't been maintained properly.
you don`t worry the explosion will be in the next village
@@JosephArata зз$бббббббббббббббббжзббббзз$з$бббббббббббббббз$бббббббббббббббббз$бббжзбжхбббббббббббббббббббббббббб$з ббббббббббббббббббббз$бзбзбзбббббббббббббббббббб$з бзззз$ббббббббббзбжббббббзбзбзббзбзбзбзбззббзббббббббббббббббббббзбзббзбззббббббббббббббббзббззззз$збз№ззззбззбзббббзбзз$бббббббббббббббззззхззззззззз$ббббббббббббббббббббззбзбзз$збзбззббббзхззбзбззбббббббббббзбзббббббзбзбзззбзхз$ззззбззбббббббббббббббзззхзззз
Nothing. He released the pressure.
you know it gethers water and rust from inside too, right? please check your life insurance
Si la parte de la pintura la hubiera hecho con más ganas le metía el like....
Speed Video x2 👍👍👌
Very good restoration compressor🔥🔥🔥🔥👍👍👍👍
... no pressure test, no new ball bearings, did not open motor, did not check valves...
... it was not restoration, it was a cleaning and paiting job.
... a lot to do ...
and look like fake olded
cleaning and painting is how american tools stay in american shops...there is a diy base that doesn't have access to warehoused and high tech machines...some have to shop out pawnshops and harbor freight...my first table saw was a cast off
@@therestoration2r878 , thanks for your initiative recovering an old compressor.
Good luck ...!
@@therestoration2r878 If you don't do restorations, then the name of your channel is very misleading.
Grow up
Crappy restoration! Love the way you slathered the paint on! If that thing still works in a week I would be surprised!
Зачем разбирал непонятно, мог бы просто всё краской облить, тоже самое бы вышло!! И красить надо было в розовый, мы хоть поржали бы :D
Это называется. ,, Ревизия,, .
@@user-accept А видео называется реставрация-зачем наебывать?хайпа ради
I'm a car guy and I love taking stuff apart I take in lawn mower engines apart before and I just absolutely love this video
they have not been opened and checked: engine, valves, ball bearings and fittings.
most importantly, no air leaks have been checked from the tank and at the beginning of the video the water is rust-colored, it is not a good sign, probably the inside is worse than the outside.
advice on painting: do not paint the cylinder dissipation slats otherwise the heat will not be disposed and there will be a risk of breakage due to overheating.
It's clear he doesn't have a clue what he's doing.
do not paint the cylinder dissipation slats otherwise the heat will not be disposed and there will be a risk of breakage due to overheating.
That is inaccurate. Heat dissipation is the same painted or not. They are painted from the manufactures.
@@ShainAndrews the manufacturer's painting is specific to have a high heat exchange, the one used in the video is a normal discount paint shop. there are different types of paints, some tend to block the temperature (surfaces treated for thermal insulation) others resistant over 600 degrees (car brakes, turbo covers).
@@giampierodipietrantonio2847 You bumped your head if you think that budget compressor came from the factory with some special heat conductive paint and anything he applied is going to block that thermal exchange. Paints you mentioned have nothing to do with thermal conductivity.
The work you did is similar to what is done by those who go to your house. you pay a fortune, they do it in a hurry, and it is left with a bungling finish. What time have I lost watching this video
I should be outside putting brakes/rotors on my car.
Такое ощущение,что компрессор специально ободрали от краски и бросили в воду, чтобы потом типа отреставрировать
iceman86 я тоже так подумал))))
Оригинальный цвет был лучше. Да и не стоило его обдирать. Просто внутри всё перебрать и этого хватило бы.
так оно и есть. Среди блогеров такого формата это известный прием. Как говорится ничего личного, это бизнес...
Great Video ❤️
Restoration Restore Tool thank you very much - Not now 🚀
Channel should be called " 5 year maintenance" and not restoration as it fell quite short of restoration. Not enough in depth work went into this project. I can appreciate the effort to make this a better working machine but it still falls short of a FULL RESTORATION. Much more attention to detail needed to actually call it a RESTORATION.
One of the shabbiest restoration videos I've seen
Thank you for watching the video
I've heard of rusty bottoms in compressors blowing out and leaving a hole in the shop ceiling.
Not if it was a concrete ceiling.
Fantastic, well done
болгарка с кордщеткой, покраска кисточкой .... эх как все просто и душевно, по гаражному ))
Very nice good work!!!!
21 minutes in you're using rusty bolts to assemble it?! And painting without primer?!
This was literally the thing that drove me to the comments. Glad to see someone beat me to it.
lol, and yet almost 1.4 million views. Its a cruel and unusual world we live in.
Glad I am not the only one cringing at this video. Let this video serve as a reminder that some people just don't know what they are doing. Also the complete lack of tape and general awful painting.
OmegaGamingNetwork more like a repair than a restoration. He apparently had the tools to grind and sand the rust pits and parts clean. He masked a lot of clean up by throwing a thick layer of paint on it.
The failure to keep paint off threads and masking of labels etc made me cringe.
This is and old compressor not a picasso.
Good job well done 👍
Sempre um excelente trabalho
Thank you for your encouragement. Hava a nice day
@@therestoration2r878 thank
Faltou trocar os rolamentos...
@@ninomaster4819 al menos empaquétalos con grasa fresca.....
Another great job.👍 it look new sound better then new ones
I consider that this work is not a restoration. it's a repair only
Not even a good repair!
Mantab betulll....telaten sekali anda...i am from indonesia
Nice final result. Thumb up!
Buen video saludos desde Ecuador 🇪🇨🇪🇨🇪🇨
The engine rebuild was great...but the painting was sloppy...try sandblasting the steel, adding a zinc coat primer and wet sanding, followed by a hammertone spray paint...but generally not bad, except for the gold paint on plastic looks tacky
That was a great restore for using basic tools.
240v plug WITHOUT GROUND ?!!?!!!!!?!?!!!!!!!?!!????????? 23:15
Or you could have worded it: “Hey man, with a 240v plug you really, really should have a ground on it”
Sorry
I hate that rooster in this video! But I love this restoration video. It’s very satisfying to watch.
you should fill the interior with rust remover too.
良い仕事してますね！
見入ってしまいます。これからも頑張ってください。
Nice restoration but very low attention of details
I think the same
Very
This is NOT a restoration, this is only clean and paint (nasty paint, I'd say)
@@zawszeedek It's like painting your grandma like a 14 yearold trying to get into a night club? Making up not restoring.
@@zawszeedek Agreed... It should have used new bolts, a new strap, brushed the metal, and made a better paint job... new hoses...etc
Best entertainment ever....I’m at awe at the ability of this man restoring things. I might’ve learn something today. Keep it going.
Thanks for your comments. Your feedback is a great encouragement for us . Thank you very much
Хоть бы болты новые поставил а то ржавые назад прикрутил типо так с завода !
Muy buena restauracion!!!!!!!!!!!!!!!!! saludos
The condition of the compressor raises too many questions... Why the receiver is so rusty relative to other components. The piston supercharger is possible in oil, and the electric motor is also in oil? But like there is no. The cover on the electric motor is generally as new. Why do fittings and pressure gauges then look in good condition? The receiver in General how could there be rust? I have the feeling that with him first, especially chemistry washed off the paint, and then direct pour acid or salt solution on it straight rust STAINS. Note that when he removed the electric motor and the piston supercharger, the pads on which they are installed in the MOUNTING PLACES also have an even layer of rust. How is that possible? Was he in the water all the time? If it was in such an aggressive environment that it was covered in rust, why did nothing happen to the sticker on the side of the receiver? Around the sticker you can even see a flat strip, as if it was sealed with something. The paint on the piston supercharger is all in lumps, as after applying the paint remover. All threaded connections are unscrewed easily and naturally, and this is in this state.... By itself, the compressor may not be very new, but not exactly vintage. Don't take people for fools. (google translate)
Yes, paint thinner and salt mixture.
@@MrWolfSnack ذ
Awesome worker
it looks like it wash sprayed with acid, not sat outside for 20 years.
Was not expecting that paint job
Nice! imagine what the inside of the tank is like. I wouldn't tRust it.
k-boom!
Only second video I've watched. No talk, all work. I'm subscribing.
А вы не заметили,что он специально ржавчиной покрыт?
Very good restoration video. I prefer these slightly longer restorations of complex machinery.
How rusty is the inside of that bomb if the outside was that rusty
3:10 It doesn't look good
@@vaahtoperse18 must be in a 3rd world country to be wasting time on a 65 dollar compressor with a tank that could explode look up rusty air compressor explosion not pretty
@@kpb711
kan du selv gøre det fjols
@@jeangade5809 in English?
@@kpb711 you can do it yourself the danish guy said it to you. And its not about wasting time. You have fun learn stuff and i dont think many of these exist anymore. It will end up on a museum
great job, for a home gamer with little knowledge and simple tools, this turned out great.
With so much water drained from the tank, one wonders about the condition of the tank from a safety standpoint. Is there weakness due to corrosion which might not be readily apparent? Good clean up, by the way. What was the coating which you used on the tank prior to painting? Was it a rust converter type of chemical?
I would say the same! A series of errors in this case!
its a ticking time bomb just waiting to explode......too much pressure and then dead people.........
Agreed. That tank should be hydrostatically tested before it is pressurized. BTW, that rust converter was probably Ospho or something similar.
@@therestoration2r878 ...before or after you kill someone???......
I agree, the condition of the inside of the tank is vital. Search RUclips for “exploding compressor”.
If you attach a warning about this to the video you might save lives. /Best regards M
Como dice Marcos Marques, podría haber sido mejor, pero considero que con la limitación de recursos fue bastante buena.
Felicitaciones!!
You should replace the power cord with an earthed one, this is currently a death trap.
@@therestoration2r878 Maybe it was not required in the old times when this device was made but now all device needs to be earthed except double insulated ones. If you check the video at 15:05 there is even a broken earth tab on the down-right corner of the terminal block. Just connect it to any holding screw of the electric box and you should be good. Also the power cord looks a little undersized, but that could be the video, just in case you should check it against the amp rating on the motor.
@@netpok not all countries use the earth wire or have anything earthed.
Oh. You great ....👍👍👍
Thank you for the entertainment But ,You didn't coat the inside of the compressor with ANY kind of enamel paint against the rust it would have helped its longevity.
Very nice restoration
Компрессор современный ! Его , что кислотой облили ? Как-то не серьезно ...
Сразу подумал о том же ))
да ты прав, скорее всего компрессор перед видео был обработан уксусом (Оцет)хз как правильно, но реакция на лицо
I like your Stanley vice.
lack of experience, so many things half way cleaned and poor paint job
Neat trick to clear all the water from that tank is pour enough denatured alcohol in those tanks to be able to roll the tank around to saturate all the walls with the plugs in all the holes then take the plugs back out and dump out as much as you can and the rest of the alcohol will evaporate the rest of the moisture left
Такое ощущение что он просто захерачил хороший компрессор пескоструем закинул его в воду на недельку и тип отреставрировал
Best videos i ever seen
not a restoration but a clean up and paint
That's what a restoration is
Half ass paint and clean up at that
@@dash9048 د
Not bad. Some work went in and the end product looks a lot better that what you started with.
Ржавый фигня) пускового конденсатора нет, цилиндры с ржавчиной) ресивер надо бы на давление проверить после такого простоя)
Bạn là người việt nam phải không
What kind of painting is that? My kid can do that
Thumbs Up.. nice job
Почему манометр не закрасил, не понятно?
Very veriy nice
Bravo super job
I left after the really bad paint job...
I left before then, when he put new rings on a still dirty piston.
Yup, This one was really bad.
he made it worse than it was originally
@@AlaskanPotHead Also didn't hone the cylinders.
He also didn't clean the bolts before putting them back in.
Good. One suggestion, clean up the nuts and bolts a little more, new cotter pins. Otherwise very nice.
Poderia ter ficado muito melhor... mas parabéns pelo esforço
Poderia fazer um serviço bem melhor. Ficou muito mal restaurado.
動画のテンポもいいし仕事も丁寧でＧＯＯＤです。
Хм....такое ощущение, что ты его СПЕЦИАЛЬНО состарил....)))
Helo sou do brasil e adoro seus vídeos
1. Сомнения в старости компрессора от времени
2. Нахер разберал, так бы и красил
3. У меня бабушка в сарае так дверь отреставрировала, жалко видео не снял
Bel restauro fatto bene così si può lavorare in tranquillità che nn si rompa bene così si fanno le cose bene
Лузер. Шатуны не вытащил с коленчатым валом, подшипник не поменял, наверняка раздолбанный, в кривошипную камеру натащил грязи. Дизлайк за такой "ремонт" поставить не жалко.
Согласен, а так же после такой ржавчины было бы не плохо провести испытание ресивера, накачав 13-16 бар водой. А то может и бомбануть!
1 million 800,000 views of someone remanufacturing a bomb. Glad to see that the receiver was thoroughly inspected and pressure tested.
Thanks for your comments. We thoroughly checked the air compressor after the video. It guarantees all safety parameters . Thank you
Sorry this was just painting, not an restoration,- no changes of shaft seals, valves, ball bearings etc...
The reservatory is very damaged, because the water
He changed the piston rings. In restoration, only change what needs to be changed. If you want to replace everything, knock yourself out.
@@lyndelbeckwith1706 Maybe the wrong languare, it need to be disassbled all parts, to have a look which one you need to change/repair. Secondly why he didnt paint all parts separetly, with a brush, sorry looks not that proffesional like it need to be. Off cause, you dont need to changes all bearings, e.g. but you need to check all of them.
@@steffenreimer257 Thats true Steffen, but I'mnot sure this guy hasaccess to all of that kind of equipment. He does pretty well with what he has, I think. :)
Cara é fera rapaz.
У вас что дожди кислотные что ли?Как так мог заржаветь?
Really did a disservice to that crank by leaving it in while you cleaned around it.
You forgot to paint the belt.
Haytham BuKhadra best comment 😂😂😂😂
😂
Usta eline saglik cok faydali bir video cekmişsin tesekkurler
You can see the trails Of whatever chemical they sprayed on the tank to make it look rusty no doubt that's an older compressor but to try to enhance the rust to make it seem worse is a joke
What's the point of hate? Just enjoy the damn video and grow up.
dude i was thinking the same-thing ! this looks fake ! i like those videos a lot , but this guys ... dont know man ! the motor and compressor got oil all over them but nothing on the tank ,
@@isolophilia12 cant enjoy a fake video
@@saknk1 yeah this is a goofy video
@@hippieconception1408 your such a damn child
He’s giving hearts to anyone
So u mean to tell me, you did all that work to HAND PAINT IT BACK??? WOW!!! Really man???
yea, when i got to the painting i switched videos...that was enough of that
Steve's Channel this is work
You must have served time in the Navy, painting everything Battleship Gray.
Thanks for your comment. We do our work with limited knowledge. The work has many errors. Do you have any suggestions for us? Thank you
Why did you take it apart and then not replace any bearings etc? You may as well have just jet washed the compressor and painted it saving yourself a lot of work. Smh
What's it matter? He is doing it his own way because he enjoys doing it his own way. Leave it alone.
awesome job you great with the tools you have awsome content
Когда шлифуешь, полируешь, чистишь детали, то отверстия надо заглушать, иначе пиздец резьбе.
Congrats...very good job...!