You do all these servo test but it's hard to remember which does which to compare, it would be great if you could do a round up at the end, and put them all in a bar graph with overall torque, sorted by power volt X amps, and also them sort for Oz per $ 👍
@@tonysweet9137 Why is it useless.. If you decide on a servo... a few clicks on the progress bar gives you the information about it. I'm just not sure why would anybody need a 47kg servo in a crawler.. other to use it as a boulder wedge in a quarry...That will break most crawler parts...
Thank you for taking the time and effort to test all of the top dog servos. This is the one upgrade I do to all of my rc’s over anything else! 1st mod of every build...
I have found a very cheap, powerful, and fast brushless servo for 23 dollars!!!!!!!!!😮 Gx 42kg brushless servo on ebay. It is unbelievable for the price. It blew my mind... I've ran it at a race this past weekend, and it ran flawless. Very strong, and centered very well. Hope you reveiw it one day! Great video!
Have you seen the Boom Racing Python servo made to be axle mounted? It doesn't have tabs on the ends but has one rail down the side to mount directly to the truss or an adapter bracket. It looks very streamlined and waterproof with a 45kg rating. I guess you would have a problem trying to use your rig to test it but I sure would like to see how it compares. You guys are doing an excellent job and I thank you for spending the time and presenting it for us. Have you thought about how to check the calibration of your rig? It wouldn't be hard to put a pulley up at the top and a pulley at the edge of the table to hang calibration weights.
My favorites are the Reefs 555, Protek 370TBL 650oz and the Holmes SHV500. You honestly need to test the new Holmes against the 3Brothers RC direct current servo.
FC previously tested both direct current servos. This is an update for Holmes; but, could not see what voltage was used due to banner being in the way of the meter...LOL
Rc review , I would love to see you guys test the reefs 777 as i just bought one. My friend went with the raw 500. We are both pleased with the strength and speed of the reefs and at that price point there is no comparison.
Wow... Pretty impressive results, dude!!! 😮 Could you please test some from Banggood? Any brand, really... Because it's my only option to buying stuff here. 😕
That’s the best servo I have purchased so far. I have thousands of dollars into rc parts and that was the only servo so far that has been worth the money.
Very good info. A video on how you put together your testing jig would be good too. Why did you not just connect the servo output directly to the fish scale?
Very informative and useful! really opened my eyes to how much current these high torque servos actually pull. I've always assumed 3 or 4A were the maximum at full torque, but seeing 7A...Wow! Makes it easier to choose a BEC as well.
My 1st RTR when I got back into RC was a Redcat Gen 8 Axe, and ever since Reefs has been my go to for servos, and Hobbywing for ESC and Motors. I have to Admit I have been thinking about building a purely Holmes Hobby crawler just so I can compare the two top dogs, at least from the word on the grapevine. Maybe on the SCX10iii chassis. I will add a Thank You, if I haven't already because your review was the tipping point on my 1st RTR and I still think my Axe is the best RC I Own, I did ungrade to an AXE FOC R2 540L 2800KV, for the wheel speed, extra punch, and for the dual mode to also use as a trailing truck.
I found a redcat gen 8 that was half submerged in the mud in a stream. It had obviously been swept downstream and it was there for awhile because it was oxidized to hell. Everything was completely waterlogged.The Savox servo still works and as a matter of fact I still use it in that same redcat after rebuilding it. Testament to quality ?
You need to factor in the current draw. Some are drawing 8 or 9 amps to make that torque which they may not have when connected in RC system. Some also get hot and then perform a lot differently. In many applications it is about repeatability and accuracy more than max torque.
Then the 444 might be your cup-of-tea. The 555 is the same servo with steeper gears for more torque but slightly less speed. The 500-Raw is way faster than the 444 with just a hair more torque than the 555.
Having a torque monster is nice but if it's loud it's a hard pass for me. I have a Savox on my trx4 build and I can't even stand to drive it half the time it's so noisy. Usually I'm out in the woods trying to relax with my truck, last thing I want is some annoying buzz coming from a steering servo.
I just bought the axial scx pro with the kraken Cassie what servo would you suggest? I will be doing some small competitions but mostly trail runs thx.
The savox squealed like it was getting killed. I find my various savoxes to be usually loud and annoying. Surprised that the spektrum, Hi-tec and tekin were so quiet! I know what i will buy next.
I seen you had a JX Hv servo in the line of servos to be tested in the video, but never tested it? I have 3 Jx Bls7132 HV servos they are supposed 5o have 32kg at 7.4. If you have this servo, can you test it and tell me the results? Thanks great video!
It was tested at 16.8 volts. It's crazy strong but it gets hot and it's flexing our test machine. We have . avideo too of it pulling at 14 volts and that and 11 volts are better for it. Very strong and stable ruclips.net/video/trgpe-b84PM/видео.html
I bought the Powerhobby 300BW for my plane. I can say. I am impressed. Smooth and fast and powerful. Who makes those servos for them? $49 too. I do think AGF servos are low resolution.
Not in the test but I'm going to try the Reef 500 black edition in my Traxxas T-Maxx. Have a Savox SW1212SG and it's good, but sometimes it gets stuck.
@@clickbaitfishing7787 The 170 did OK so I guess the 370 isn't too bad either. I know I am happy with mine. But it would be nice to know. The Reefs RAW 500 is another servo I would love to see tested.
With a bunch of them you see a downward trend due to heating up. It would be interesting to see how servos hold up with repeated pulls over an interval and where they stabilize. Something like 20 or 30 pulls, 10, 15, 20, 30 or 60 seconds apart and see how their performance changes over time.
The Savox 2290 is supposed to be a 50kg servo, your test has it at 36kg! I wonder did yoy test at 6v? It can do 7.4v, maybe it would reach 50 at the higher voltage?
What an awesome test! I actually saw this video a year ago, but re-watched it because I am looking for a new servo now. I noticed the hitec servo really had low amp draw, is it because of the regeneration feature? Also, does this hitec servo with regeneration (current back flow) feature cause problems with electronics like the castle esc’s or othe esc?
Big thanx for all the servotest you put alote of money on, a huge thanx fore the rest of your videos to ofcours. Do you have av Futaba HSP CB700 sbus2 that you maybe can do a test on? (Sorry for my english its terrible) but i hope ju shild understand me. I have one of that servo and i am realy happy whit it in my trx-4 Defender butt i want to know the truth about it. Great chanel i give you five of fice tumbs up 👍🏻👍🏻👍🏻👍🏻👍🏻
Hi; Thanks for sharing all the info and clearing up some of the claims out there. I looked at the SAVOX SB2230SG site and they run it at 7.4v. You did it at 8.4v @ 41.6kgs if I am correct. Can you check it at 7.4v as they claim to have a torque of around 580 oz and give me an answer if it still stands up to the test.
Hello, i have the hobbywing xr8 SCT ESC with the built in 15amp bec. Could that esc handle two high torque jX servos for a monster truck build? and I have lights too. thank you,
What's the torque rating for the 2230 savox at 6v? I'm running the traxxas 2250 at 6v, because I don't want to harm the other servos, and it keeps stalling. I know your video shows it around 260 oz in of torque iirc and most of the 100$ servos you guys tested at 6v wouldn't be a worthwhile upgrade. I already have a jst lead off my trax-ass id plug to power the lights since I'm running a mamba x and would love to have gotten the shv500v3 but those are harder to find than a monk playing craps in atlantic city. And while I don't care for the savox noise, the mamba x is already loud and I want something reliable and strong. But I'm stuck at 6v because.
Hi, is there a smaller steering servo? I have the dsservo's 20 kg and 25 kg. I have a custom build going and really would like something smaller that wont brake the bank! Thanks
Yes there are smaller servo that are about 1/2 as tall but $$$ $^%#^%! and there are smaller used for RC choppers and fixed wing and strong but again they can be very expensive for good one's.
I thought this was going to be really great, but I have to be honest, I haven’t enjoyed any of this servo test series. That doesn’t mean tho that you shouldn’t have done it. I’m sure you have helped tons of people with this. I just thought for some reason it would be more exciting. But I Should learn to temper my expectations. Either way thanks for doing all this work for us. It is appreciated
Rrrrright. Not perfect for sure but it's given us much content during this busy time for us (on the day job). So just putting the data out there and not too much production or presentation. Hope folks find the content useful.
I'm finding your servo content extremely helpful. @KReGaDeTH not sure why you would offer negative words to free content that is useful. Your statement would seem to suggest you should find your excitement in a different location.
I got a Savox 1231SG in my TRX-4. The traditional Savox hum is mostly benumbed by the stereo headphones I usually wear. I don't know if it achieves its claimed 444oz at 6.0V but it rarely suffers a 'stall' while crawling my 7+lb truck. It's NOT rated waterproof, but at $69.99 on Amazon, I don't much care being I live in the Ca. high desert. I may buy one for my RR10 Bomber if the OEM servo ever fails.
Been using Bluebird brushless titanium alloy geared servos for my 1/10th and 1/8 crawlers and they have never failed me. I suspect they will last forever. Also have some Savox which are equallly good but more expensive...
These are so helpful!! I really like these test, As I am looking for a servo to replace my stock X Maxx servo. I’ve found a few other servos that I wish I could get the true specs of like this test your doing. Hitec/RCD 36845 Hitec D845 on ebay for $108.00. JX Servo HV734MG on eBay for $50 to $60, Reefs 500 High Torque for $130.00, PowerHobby 76MG for $110.00 and the Savox SW-2210SG for $100...
Probably the most in-depth test I’ve seen. But servo rating are in inch oz. a weight is hung from a one inch servo arm to see if the servo can lift it through the 60* sweep, how does that compare to a pressure sensor?
So servo torque rating is in oz/in from rest to stall, (with minimal movement). That is exactly what we are measuring with the pressure sensor. The arm is exactly one inch away from center and our scale is calibrated to measure ounces til the arm stall. For the 60 degree sweep, that is just to measure the speed of the servo, traveling from one end to the other. We're not measuring that.
RC Review But maybe it should be measured with a free weight as the strength of the servo at the start of the sweep could be significantly different then that closer to the end of the sweep as some servos start very strong but stall partially through the range of motion.
Shot in the dark with this question really need an answer PLEASE. Will running the blue Savox h2o proof servo blow my trx4 ESC out, even if I'm running a castle micro x and castle 2.0 BEC at 5.4 v? Appreciate any help before i install it.
RC Review haha no pun intended. Should go great with the 8247x servo horn and ssd brass portal covers on my tactical. Any brushed motor upgrades you would recommend or is the 21t titan motor good enough for general use?
Thanks for spending all that money and running the test. I'm sure a lot of us benefited from knowing which brands are true to their claims.
You do all these servo test but it's hard to remember which does which to compare, it would be great if you could do a round up at the end, and put them all in a bar graph with overall torque, sorted by power volt X amps, and also them sort for Oz per $ 👍
I agree this information is useless. I give up on trying to remember all this. What a shame too.
@@tonysweet9137 Why is it useless.. If you decide on a servo... a few clicks on the progress bar gives you the information about it. I'm just not sure why would anybody need a 47kg servo in a crawler.. other to use it as a boulder wedge in a quarry...That will break most crawler parts...
@@RCiler Although not useless, it would be a lot more useful if he could give an overview.
@@RCiler not if you set your steering endpoints
@@tonysweet9137 its called pen and paper. You can take notes as you watch the video. Spoon fed much?
torques numbers were
futaba 257
spektrum rc 351
promodeler 391
hitec hsb 506
savox 513
tekin 530
protek 552
savox 223 570
reefs 555 661
holmes 681
Appreciate all you do for the hobby Francis. Ordered the Reefs through your Amain link!
Great video, I’m curious as to why my Futaba A700 “1000oz” servo actually would test at.
Thank you for taking the time and effort to test all of the top dog servos. This is the one upgrade I do to all of my rc’s over anything else! 1st mod of every build...
Just ordered a reefs 555 and castle bec. Thanks for your review👍
We just retested the 555 after months of use and it's still a dominator.
I have found a very cheap, powerful, and fast brushless servo for 23 dollars!!!!!!!!!😮 Gx 42kg brushless servo on ebay. It is unbelievable for the price. It blew my mind... I've ran it at a race this past weekend, and it ran flawless. Very strong, and centered very well. Hope you reveiw it one day! Great video!
This is great edition to the series ...this is all the marbles I know there are other servos you have not covered but this was great...Thanks..
Can you test some ProModeler servos
The tekin was crazy quiet. Cool video and nice to see someone testing all these for us.
Thank you really appreciate that
Have you seen the Boom Racing Python servo made to be axle mounted? It doesn't have tabs on the ends but has one rail down the side to mount directly to the truss or an adapter bracket. It looks very streamlined and waterproof with a 45kg rating. I guess you would have a problem trying to use your rig to test it but I sure would like to see how it compares.
You guys are doing an excellent job and I thank you for spending the time and presenting it for us.
Have you thought about how to check the calibration of your rig? It wouldn't be hard to put a pulley up at the top and a pulley at the edge of the table to hang calibration weights.
Awesome !
Wanna see some more HDPower servos 🙏🏼
My favorites are the Reefs 555, Protek 370TBL 650oz and the Holmes SHV500.
You honestly need to test the new Holmes against the 3Brothers RC direct current servo.
FC previously tested both direct current servos. This is an update for Holmes; but, could not see what voltage was used due to banner being in the way of the meter...LOL
I'm a Reefs fan, but that new Holmes Servo looks fire!!!
@@ctsteve1967 Not any more...The Reefs RAW 500...LOL
This is the best crawler channel on youtube
Finally a video where I can actually the servos being tested
Holmes Hobbies!.... Nice... Plus we get to see the owner... He is a cool dude...
He’s one of the best things about his hobby
That reefs 555 looks like the best deal of the bunch!
thank you, spending your hard earned money 💰 💵 💰
So we don’t have to 😃
Rc review , I would love to see you guys test the reefs 777 as i just bought one. My friend went with the raw 500. We are both pleased with the strength and speed of the reefs and at that price point there is no comparison.
Aren't those like 500$ servos?
Thanks for taking the time and producing real life data
No need to tell us its a Savox, we can tell by the noise.
TechnoDuck the promodeler have a sweet sound too
@@themountain59 reeeeeeeeeeeee
@@EazyDuz18 lol
Wow. Some were whisper quiet in comparision.
I don't know that
Man so glad to be a subscriber of this channel.I love these servo testing videos.Thank you so much :)
Wow... Pretty impressive results, dude!!! 😮
Could you please test some from Banggood? Any brand, really... Because it's my only option to buying stuff here. 😕
What about all the noise from them? What was the quietest?
Homes Hobbies and Reefs make some nice products.
Hey Hey !!! merry Xmass my man , I just wanted to let you know how much I appreciate this test , I ended up buying the Holmes hobby servo you tested!!
Would like to see where the actual rating is for the Reefs Raw 500. I really like it. Very quiet and really fast as well
😃🙏
That’s the best servo I have purchased so far. I have thousands of dollars into rc parts and that was the only servo so far that has been worth the money.
Thanks.👍 I like the hitec with the hi price just because it's so quiet.
Is the Hitec at 2:40 really only drawing 1.8 amps at max torque? That's a few times more efficient than the other ones. How do they do it?
Very good info. A video on how you put together your testing jig would be good too. Why did you not just connect the servo output directly to the fish scale?
Very informative and useful! really opened my eyes to how much current these high torque servos actually pull. I've always assumed 3 or 4A were the maximum at full torque, but seeing 7A...Wow! Makes it easier to choose a BEC as well.
Great comparison servo vid. Want to know your thoughts on the futaba hps cb700 servo. Thanks
My 1st RTR when I got back into RC was a Redcat Gen 8 Axe, and ever since Reefs has been my go to for servos, and Hobbywing for ESC and Motors. I have to Admit I have been thinking about building a purely Holmes Hobby crawler just so I can compare the two top dogs, at least from the word on the grapevine. Maybe on the SCX10iii chassis.
I will add a Thank You, if I haven't already because your review was the tipping point on my 1st RTR and I still think my Axe is the best RC I Own, I did ungrade to an AXE FOC R2 540L 2800KV, for the wheel speed, extra punch, and for the dual mode to also use as a trailing truck.
I found a redcat gen 8 that was half submerged in the mud in a stream. It had obviously been swept downstream and it was there for awhile because it was oxidized to hell. Everything was completely waterlogged.The Savox servo still works and as a matter of fact I still use it in that same redcat after rebuilding it. Testament to quality ?
Gotta see an update on this one. Is the rig still around?
Yeah we need to see a test on the 3 brothers servoes
FC tested the 3-Brothers G11 servo at 11.1 and 14.8V on one of his previous videos.
@@billderas3420 I want to see results for the G13. It would have fit right in spec wise with the servoes tested on this video
I was a fan of JR back 20 years when I was racing qscale. Are they still around and good quality?
You need to factor in the current draw. Some are drawing 8 or 9 amps to make that torque which they may not have when connected in RC system. Some also get hot and then perform a lot differently. In many applications it is about repeatability and accuracy more than max torque.
I recently bought the Reef Triple5 and I love it, I actually think is it waaaaay too much xD
Then the 444 might be your cup-of-tea. The 555 is the same servo with steeper gears for more torque but slightly less speed.
The 500-Raw is way faster than the 444 with just a hair more torque than the 555.
A three figure $ervo!
I have the Triple 4 and the Triple 5; the 5 is definitely a little slower than the 4, but has mammoth power!
How come the Holmes 550v3 is tested at 10V?
Having a torque monster is nice but if it's loud it's a hard pass for me. I have a Savox on my trx4 build and I can't even stand to drive it half the time it's so noisy. Usually I'm out in the woods trying to relax with my truck, last thing I want is some annoying buzz coming from a steering servo.
Tekin are the best! Very well made and totally silent with any amount of load!
Thank you for posting this video, I’m gonna share the heck out of it!
I just bought the axial scx pro with the kraken Cassie what servo would you suggest? I will be doing some small competitions but mostly trail runs thx.
Missed out testing the 170tbl race servo and not the 370tbl crawler servo. My question how many of those $10 fish scales would read differently...
Hi, Which is the best servo for traxxas trx4 defender?, which one do you recommend?, thank you
I really appreciate your review. Saved me a lot of money and time. I love all your videos!! Thank you.
i want to ask that can i use MG995 servo motor on 7.4 V , will it burn ? or work normally ?
I like the G13. From 3 Brothers RC running straight from a 3s battery.
We tried to get that and the G12 but really limited availability.
Great Video. What would you get for the X maxx?
The savox squealed like it was getting killed. I find my various savoxes to be usually loud and annoying. Surprised that the spektrum, Hi-tec and tekin were so quiet! I know what i will buy next.
can you show Spektrum S9120Bl 1/5 Torque Metal Servo horn for Traxxas xmaxx installation
I bought the same servo. No reviews found?
Last one at 10v was beast
I seen you had a JX Hv servo in the line of servos to be tested in the video, but never tested it? I have 3 Jx Bls7132 HV servos they are supposed 5o have 32kg at 7.4. If you have this servo, can you test it and tell me the results? Thanks great video!
The tekin did not make any noise. Is the sound muted or is it really that quiet?
How about savox 1230. Claims 36 kg at 6 v and reasonably priced at 60 USD. U said video needed editing but not shown here?
Michalis Petrides I second that
FC...Awesome effort. What voltage was the Holmes SHV500V3 tested at? Could not read the voltage meter with the banner running across it. Thanks.
It was tested at 16.8 volts. It's crazy strong but it gets hot and it's flexing our test machine.
We have . avideo too of it pulling at 14 volts and that and 11 volts are better for it. Very strong and stable ruclips.net/video/trgpe-b84PM/видео.html
Mines the Holmes hobby one but I have the version 2 it’s been a good servo !
Great info!
Do you have this for cheapo servos also?
I have been using the ZOSKAY 35kg servo with great results!
Subscribed!
He just did a video on the zoskay 35kg not putting out near what they claim
I bought the Powerhobby 300BW
for my plane. I can say. I am impressed. Smooth and fast and powerful. Who makes those servos for them? $49 too. I do think AGF servos are low resolution.
Not in the test but I'm going to try the Reef 500 black edition in my Traxxas T-Maxx. Have a Savox SW1212SG and it's good, but sometimes it gets stuck.
What steering servo should you use on the Xmaxx RC truck my 2085X keeps blowing out every other time I use it should I use the savox 2290
Cool but I was kinda hoping you would test the Protek RC 370TBL.
Espen Lund can’t please everybody
x2
@@clickbaitfishing7787 I asked about the 370 a while back and they said they would. Maybe they got it mixed with the 170.
Espen Lund well he’s a nice guy with a cool gadget, I’m sure he will get round to it .
@@clickbaitfishing7787 The 170 did OK so I guess the 370 isn't too bad either. I know I am happy with mine. But it would be nice to know. The Reefs RAW 500 is another servo I would love to see tested.
With a bunch of them you see a downward trend due to heating up. It would be interesting to see how servos hold up with repeated pulls over an interval and where they stabilize. Something like 20 or 30 pulls, 10, 15, 20, 30 or 60 seconds apart and see how their performance changes over time.
Thanks for sharing and ...
One of the best Chanel!!!
The Savox 2290 is supposed to be a 50kg servo, your test has it at 36kg! I wonder did yoy test at 6v? It can do 7.4v, maybe it would reach 50 at the higher voltage?
What an awesome test! I actually saw this video a year ago, but re-watched it because I am looking for a new servo now. I noticed the hitec servo really had low amp draw, is it because of the regeneration feature? Also, does this hitec servo with regeneration (current back flow) feature cause problems with electronics like the castle esc’s or othe esc?
Can you post a list of these servos and their results?
Hi can you tell me which one I have to buy I have RC car hsp Wolverine 94111
Big thanx for all the servotest you put alote of money on, a huge thanx fore the rest of your videos to ofcours. Do you have av Futaba HSP CB700 sbus2 that you maybe can do a test on? (Sorry for my english its terrible) but i hope ju shild understand me.
I have one of that servo and i am realy happy whit it in my trx-4 Defender butt i want to know the truth about it. Great chanel i give you five of fice tumbs up 👍🏻👍🏻👍🏻👍🏻👍🏻
So, sir the final verdict for the best servo in a scx10 III?
Hi; Thanks for sharing all the info and clearing up some of the claims out there. I looked at the SAVOX SB2230SG site and they run it at 7.4v. You did it at 8.4v @ 41.6kgs if I am correct. Can you check it at 7.4v as they claim to have a torque of around 580 oz and give me an answer if it still stands up to the test.
Hello, i have the hobbywing xr8 SCT ESC with the built in 15amp bec. Could that esc handle two high torque jX servos for a monster truck build? and I have lights too. thank you,
Do the manufacturers measure with an arm or centered on the shaft?
They official spec is oz/in is 1 inch away from center.
For kg/cm, it's 1 cm away from center.
What's the torque rating for the 2230 savox at 6v? I'm running the traxxas 2250 at 6v, because I don't want to harm the other servos, and it keeps stalling. I know your video shows it around 260 oz in of torque iirc and most of the 100$ servos you guys tested at 6v wouldn't be a worthwhile upgrade. I already have a jst lead off my trax-ass id plug to power the lights since I'm running a mamba x and would love to have gotten the shv500v3 but those are harder to find than a monk playing craps in atlantic city. And while I don't care for the savox noise, the mamba x is already loud and I want something reliable and strong. But I'm stuck at 6v because.
The 3 Brothers seems to be the best deal in premium Servos...
No need to announce the Savöx - the NOISE gives them away!! 😜
Carmine ✈🚂🚙
What steering servo would you use for the X max truck I keep blowing out the 2085X steering servo every other time I drive my ex Maxx truck
Hi, is there a smaller steering servo? I have the dsservo's 20 kg and 25 kg. I have a custom build going and really would like something smaller that wont brake the bank! Thanks
Yes there are smaller servo that are about 1/2 as tall but $$$ $^%#^%! and there are smaller used for RC choppers and fixed wing and strong but again they can be very expensive for good one's.
Thanks for all your good work, very interesting.
I thought this was going to be really great, but I have to be honest, I haven’t enjoyed any of this servo test series. That doesn’t mean tho that you shouldn’t have done it. I’m sure you have helped tons of people with this. I just thought for some reason it would be more exciting. But I Should learn to temper my expectations. Either way thanks for doing all this work for us. It is appreciated
Rrrrright. Not perfect for sure but it's given us much content during this busy time for us (on the day job). So just putting the data out there and not too much production or presentation. Hope folks find the content useful.
I'm finding your servo content extremely helpful. @KReGaDeTH not sure why you would offer negative words to free content that is useful. Your statement would seem to suggest you should find your excitement in a different location.
Are you using 1inch arms? That’s what their specked at
I got a Savox 1231SG in my TRX-4. The traditional Savox hum is mostly benumbed by the stereo headphones I usually wear. I don't know if it achieves its claimed 444oz at 6.0V but it rarely suffers a 'stall' while crawling my 7+lb truck. It's NOT rated waterproof, but at $69.99 on Amazon, I don't much care being I live in the Ca. high desert. I may buy one for my RR10 Bomber if the OEM servo ever fails.
Been using Bluebird brushless titanium alloy geared servos for my 1/10th and 1/8 crawlers and they have never failed me. I suspect they will last forever. Also have some Savox which are equallly good but more expensive...
These are so helpful!! I really like these test, As I am looking for a servo to replace my stock X Maxx servo. I’ve found a few other servos that I wish I could get the true specs of like this test your doing. Hitec/RCD 36845 Hitec D845 on ebay for $108.00. JX Servo HV734MG on eBay for $50 to $60, Reefs 500 High Torque for $130.00, PowerHobby 76MG for $110.00 and the Savox SW-2210SG for $100...
I would like to see a test on the reefs raw500
Outstanding work!!! 👍
I would like to see you test the power HD lw25kg. I ran mine hard all summer and it held up great. It really shines with a cc bec set to 8.4v.
Is the reefs Raw 500 good an will fit n a kaiju? N do I need a BEC?
Probably the most in-depth test I’ve seen. But servo rating are in inch oz. a weight is hung from a one inch servo arm to see if the servo can lift it through the 60* sweep, how does that compare to a pressure sensor?
So servo torque rating is in oz/in from rest to stall, (with minimal movement). That is exactly what we are measuring with the pressure sensor. The arm is exactly one inch away from center and our scale is calibrated to measure ounces til the arm stall.
For the 60 degree sweep, that is just to measure the speed of the servo, traveling from one end to the other. We're not measuring that.
RC Review But maybe it should be measured with a free weight as the strength of the servo at the start of the sweep could be significantly different then that closer to the end of the sweep as some servos start very strong but stall partially through the range of motion.
Any recommendations for a quality servo that is fully compatible with a stock Kraton 6s RTR?
Shot in the dark with this question really need an answer PLEASE. Will running the blue Savox h2o proof servo blow my trx4 ESC out, even if I'm running a castle micro x and castle 2.0 BEC at 5.4 v? Appreciate any help before i install it.
2 years since this video and I would love you to do the "new ones" out there.....
I want known who is the winner... And mount then in the mc8..
also, why testing at 8.4v if it's not recommended
to run these servos at that voltage?
What surprised me the most is how silent some of these servo's are.
Where these digital servos ? Or something to do with the gearboxes ?
Thanks for the work! A chart would be nice.
do you have this for the 1/24 scales?
Yay just purchased my Holmes hobbies shv500v3!
We won’t steer you wrong :)
RC Review haha no pun intended. Should go great with the 8247x servo horn and ssd brass portal covers on my tactical. Any brushed motor upgrades you would recommend or is the 21t titan motor good enough for general use?
Sure did enjoy this💎😎
you need to do a torque test for brushed and brushless motors thanks
What's up with that mangled-up element Enduro body?