I liked that the aussie was more or less "ima just weld this pipe up gap or tight." Travis breaks it down to a level for someone that's never welded pipe before. Sometimes you gotta go the aussie way and just weld the damn thing.
More Travis. He's the man. I remember watching videos of him using the described technique welding practice pipe off the back of his truck. Helped me a ton seeing him actually doing it. Thank you sir.
That was Epic, two of the guys i look up to welding it out and getting down ! Amazing how they can just jump in front of a camera with someone else's machine and just get it Done. Thanks all the boys at Weld Tube for bringing it to the big screen for us to watch !!
I love how watching weld tube, and watching it from the beginning and watching it grow, continuous, and the fellowship, when everyone comes together. And share all the sweet science. AND the art of Welding 💯 keep up the Awesome work, so many people are wat ching and Learining, and understanding.
My favorite part about travis is that hes the only youtube teach that talks about body positioning with pipe that’s important as fuck and itll help so much
It's like the old bush pilot saying, "the only thing that will replace a DC-3 is another DC-3" I'm a veteran field, pressure welder, and the only thing I'll replace my old SA-200 K6090 with is another SA-200 K6090.
Hi welding family when I'm out in the field welding 12inch I usually put a big tack on top and bottom. Then I run my root with a 5/32+ the reason I do that is because it only takes one rod on each side of the pipe to finish the root pass and it looks really nice, were usually moving quick out in the field. Its really quick you guys should try it. [Great video guys]
Awesome video!! It’s great seeing all these guys in the same room,TON of knowledge in the same small place at one!! Need this more often!! Keep up the videos fellas!!! Watching all the way from Arkansas!!
Yes it's nice to see a Western Canadian master in his field showing us how it's dun. I'm a retired Jman who can only wish my skill was even close when I was in it . lol .
Great video you all do well with your info thanks a lot for all the info , and weldtube for helping us learn to burn love seeing Travis field he like my MVP in this field been watching him when I was in welding school , and his video on all his machine . He should make more video ,and on the job might be hard , but just saying . You all do great love you all for the info ., And keep do what you all doing , and Sharing.
Great video, I wish I was getting the same level of detailed instruction in my classes as Travis gives in this segment! Why do so many guys run those old Lincolns from the 60s, cost?
Awesome video. Great explanations but just wondering if y’all do any videos using the sa200 with scratch start rig on pipe. Whole diff beast than having a foot petal to Fall back on for fine tuning
what machine was better? they should have compared the miller to a lincoln cross country 300. why has miller never made a generator? they keep trying to get the pipeliner market but they wont do it with the alternators they make. plug in machines are not like a DC generator
I was thinking there was going to be a wager on this brother-in-law weld... David vs Goliath You know, you could hold weekly battles for you students to choose whether or not they want to enter. $5 to $30 to enter depending upon the coupon size... At the end of the week, the coupons are taken out and judged by the students themselves as well as the yourselves. Coupon is a split pipe with full root,.2/3 fill, and 1/3 cap. That gives them full access to the root, fill, cap, and the entire backside to judge. Each person has 2 votes; they are automatically given one for their own entry and their own coupon which is not presented to them as they judge the coupons as a whole. That way it's fair and they still have their own vote which nullifies counting their own coupon vote! So, they're judging and scoring only their competition. You'd have to number the coupons where they can't see it after each weld is presented with 3 random numbers to identify their coupons and the number is given a letter that you keep a key of for all entries. You can only tell them the letter that corresponds to the number in the key. That way they can't go off telling their numbers to their friends to split the pot and their letter won't do anything because they won't know the corresponding number that's on their coupon. End of the week, they judge them and after it's all over... You look at your key for final letter marking alongside numbers and each person can see their coupon number with letter when you call out the winner! Incentivized welding improvement that helps them in their daily lives. xample; 573-A ... 270-Z
I know what your shooting for...had the same problem for a while. Good ol boy showed me the trick to get it nice and full without a high crown and undercut...on the bottom you gotta whip it out the puddle about an inch and let the puddle cool then come back to it to spread like you want it.
IS THIS THE WAY YOU DO ON THE JOB,TALK,TALK,TALK AND DON'T FORGET TO ASK HIM A QUESTION,IS TALKING PERMITTED ON THE JOB?AS LONG AS YOU GET TO THE POINT AND KNOW SLEEPING ON THE CLOCK!GET TO THE POINT.YOU GUYS,I TELL YA,AND I'VE GOT TO BLINK MY RIGHT EYE 12 TIMES B 4 I BLINK MY LEFT EYE 1 TIME.AND THEN I SHOULD STOP TO RE-RIE MY SHOE LACE BUT IS IT BREAK TIME YET,OH AFTER I FINISH THE BEAD(WHICH I HAVEN'T STARTED YET BECAUSE I'VE BEEN TALKING,EXPLAINING ALL THIS).MAYBE WHEN I GET FINISHED(A YEAR FROM NOW)I'LL WRITE A BOOK,"PIPELINE WELDING".YOU KNOW THERES KNOW WAY THE GUY USING THE LINCOLN,HAS A GIRL FRIEND OR WIFE,NO WAY.HE NEVER GETS TO THE POINT.IS THIS THE WAY HE IS WITH WOMEN,IN THE SACK,HE DOESN'T GET TO THE POINT,JUST KEEPS ON TALKING.
👇WeldTube Store👇
www.weldlife.com
I liked that the aussie was more or less "ima just weld this pipe up gap or tight." Travis breaks it down to a level for someone that's never welded pipe before. Sometimes you gotta go the aussie way and just weld the damn thing.
More Travis. He's the man. I remember watching videos of him using the described technique welding practice pipe off the back of his truck. Helped me a ton seeing him actually doing it. Thank you sir.
That was Epic, two of the guys i look up to welding it out and getting down ! Amazing how they can just jump in front of a camera with someone else's
machine and just get it Done.
Thanks all the boys at Weld Tube for bringing it to the big screen for us to watch !!
Travis showing his body position and stepping you through his movement was awesome. Please consider integrating this into future videos.
I love how watching weld tube, and watching it from the beginning and watching it grow, continuous, and the fellowship, when everyone comes together. And share all the sweet science. AND the art of Welding 💯 keep up the Awesome work, so many people are wat
ching and Learining, and understanding.
Travis actually taught me how to
Weld watching his videos way back in 2014 🙏🏻🙏🏻🙏🏻stay blessed Travis @weldtube
My favorite part about travis is that hes the only youtube teach that talks about body positioning with pipe that’s important as fuck and itll help so much
It's like the old bush pilot saying, "the only thing that will replace a DC-3 is another DC-3"
I'm a veteran field, pressure welder, and the only thing I'll replace my old SA-200 K6090 with is another SA-200 K6090.
I always like the sound!
I’ll like to see y’all collaborate with jody tips n tricks in the future
How bout Andrew Cardin also😎
BreadMan _96 that prolly in the making
Klay from Chesham welding is the Shizzle Mcnizzle! not many words but the welds speak for them selves! Regards Paul from the land of the kangaroos.
Great my friends as always!
congratulations for both!
THIS IS BY FAR MY FAVORITE EPISODE FROM YOU GUYS! Tavis is a 🐐 my aspirations.. 💪🏼
You don't need to be playing music especially when someone is talking. Many of us old timers don't need a back ground noise to compete with.
Couldn't understand the guy talking because the music is too loud.
HAHAHA
Klay let's his welding speak for himself. Solid welds, always first class.
Hi welding family when I'm out in the field welding 12inch I usually put a big tack on top and bottom. Then I run my root with a 5/32+ the reason I do that is because it only takes one rod on each side of the pipe to finish the root pass and it looks really nice, were usually moving quick out in the field. Its really quick you guys should try it. [Great video guys]
Awesome video!! It’s great seeing all these guys in the same room,TON of knowledge in the same small place at one!! Need this more often!!
Keep up the videos fellas!!!
Watching all the way from Arkansas!!
Travis is a welding wizard!!!!
Yes it's nice to see a Western Canadian master in his field showing us how it's dun. I'm a retired Jman who can only wish my skill was even close when I was in it . lol .
Travis field is like 💯 like a mad man In science .
cheff Solo nah, just a dude who pays attention to his work and does some homework
The guy that talked less is the one with the better looking weld 🤷♂️
Travis field the man hes a bad bad man.
I like that, International Squad. I love Houston. Thanks for sharing.
Mr Alberta is definitely the pipe champ there
damn Travis gloves really stay fresh throughout the whole vid & 6010, that’s how you know he knows what he’s doing 😉
I'm just grateful to be here.
Me: amen!
Great job Thanks to all the WeldTube
Great explanation and find detail nice awesome welding Both of you
Nice work Travis. Gerry must appreciate his name on the coat.
Still my favourite video, I love you guys
Nice to see fieldres!! yea yea yea!
ruclips.net/channel/UCNsfFIfIBwHtA7ZTMTkJMlwvideos
Great video you all do well with your info thanks a lot for all the info , and weldtube for helping us learn to burn love seeing Travis field he like my MVP in this field been watching him when I was in welding school , and his video on all his machine . He should make more video ,and on the job might be hard , but just saying . You all do great love you all for the info ., And keep do what you all doing , and Sharing.
Awesome demonstration 😁🤩
Bro love these videos, much to weldtube
Badass video! I wonder what the results would be if they had their own machines? Lincoln guy myself but that Pipe pro smoked that 200
I’m pretty sure he was attempting to “Sonic Voice Fuse” that pipe together. But both guys definitely showed great knowledge and skill.
Good body positioning explanation.
Awesome video, UP 10!!!!
Great video, I wish I was getting the same level of detailed instruction in my classes as Travis gives in this segment! Why do so many guys run those old Lincolns from the 60s, cost?
Unless I missed it while scrolling through the comments I wish we could get a close-up of the welds.
This is what people need to see!!!
Awesome video. Great explanations but just wondering if y’all do any videos using the sa200 with scratch start rig on pipe. Whole diff beast than having a foot petal to
Fall back on for fine tuning
what machine was better?
they should have compared the miller to a lincoln cross country 300.
why has miller never made a generator? they keep trying to get the pipeliner market but they wont do it with the alternators they make. plug in machines are not like a DC generator
Nice arcs bruhs..
Awesome video!
Can you please tell me how much of amperage the second filler pass was welded? ... and how thick is the pipe?
What shirts are those?
nice weld guys.
how much yall make in Australia rig welding?
Chris V. A fair bit haha
ha ha I figured out was good. just curious the difference in the states and aus. pay
Nice video much love yall from south Louisiana.. nice work.
Damn wish I could go to this school, but unfortunately I work 14/14 rotation😭
Who made those shirts. I want to get some made
hjalmar excelentes tutoriales ,excelentes instructores esto nos sirve de gran ayuda en nuestras labores much
Make a video how you guys work that bottom quarter ?
Can y’all do a vid on that old school junior sa200 in the background to the right.
Awesome vid. But where can i get one of those shirts tho!!
Miller big blue 400 pro!!
What stingers are they using?
Nice welder and nice welding 👌👌👌
Is it possible for you to do a in dept detail on how to weld 6g stainless steel tig?
Purge pipe joint down to 1% oxigen set pipe gap between 3/32 to 1/8 use a #4 gas nozel for the root amperage around 90 amp depende on the pipe size
Anyone no what the paper setup with the pipeliner is?
were did you get those welding caps?
muchas gracias
Nice shirts, I need one of those lol.
Is it true that in some parts of Canada they don't allow pancake hoods?
No one runs them really.. Sugar scoops and safety glasses.
I was thinking there was going to be a wager on this brother-in-law weld... David vs Goliath
You know, you could hold weekly battles for you students to choose whether or not they want to enter. $5 to $30 to enter depending upon the coupon size... At the end of the week, the coupons are taken out and judged by the students themselves as well as the yourselves.
Coupon is a split pipe with full root,.2/3 fill, and 1/3 cap. That gives them full access to the root, fill, cap, and the entire backside to judge.
Each person has 2 votes; they are automatically given one for their own entry and their own coupon which is not presented to them as they judge the coupons as a whole. That way it's fair and they still have their own vote which nullifies counting their own coupon vote! So, they're judging and scoring only their competition.
You'd have to number the coupons where they can't see it after each weld is presented with 3 random numbers to identify their coupons and the number is given a letter that you keep a key of for all entries. You can only tell them the letter that corresponds to the number in the key. That way they can't go off telling their numbers to their friends to split the pot and their letter won't do anything because they won't know the corresponding number that's on their coupon.
End of the week, they judge them and after it's all over... You look at your key for final letter marking alongside numbers and each person can see their coupon number with letter when you call out the winner! Incentivized welding improvement that helps them in their daily lives.
xample;
573-A
...
270-Z
Nice videos
But can u do videos of the bottom on fill n cap
I know what your shooting for...had the same problem for a while. Good ol boy showed me the trick to get it nice and full without a high crown and undercut...on the bottom you gotta whip it out the puddle about an inch and let the puddle cool then come back to it to spread like you want it.
Also when your capping...I like to whip it back towards me after I tie in to get a nice little button on the bottom.
muito top vocês são incríveis 👏👏 muitoo show manos.
It not the welding machine it's the welder
I got a bobcat 250 and am very sure i do same job
I agree I've got a ranger 250 and it will do everything the bigger machines will
Soon as I heard the aussie accent I had to watch. Im american living in australia doing a boilermaker apprenticeship. love to burn learn and earn baby
Show the welding
Que video espectacular por favorcito es pañol quiero aprender mas
Hell yea mate
Nice 👌🏻 weld.
Finally
Y’all never show the cap
That lefty get‘ nit
The guy with the pipe pro is burning way too cold.
Miller looks better what can I say
Like his knee pads. I have another name for them.
Travis is running to cold
ingles
Ok men.
✌️✌️✌️❤️❤️❤️
🇹🇭🇹🇭🇹🇭🇹🇭🇹🇭welding.
IS THIS THE WAY YOU DO ON THE JOB,TALK,TALK,TALK AND DON'T FORGET TO ASK HIM A QUESTION,IS TALKING PERMITTED ON THE JOB?AS LONG AS YOU GET TO THE POINT AND KNOW SLEEPING ON THE CLOCK!GET TO THE POINT.YOU GUYS,I TELL YA,AND I'VE GOT TO BLINK MY RIGHT EYE 12 TIMES B 4 I BLINK MY LEFT EYE 1 TIME.AND THEN I SHOULD STOP TO RE-RIE MY SHOE LACE BUT IS IT BREAK TIME YET,OH AFTER I FINISH THE BEAD(WHICH I HAVEN'T STARTED YET BECAUSE I'VE BEEN TALKING,EXPLAINING ALL THIS).MAYBE WHEN I GET FINISHED(A YEAR FROM NOW)I'LL WRITE A BOOK,"PIPELINE WELDING".YOU KNOW THERES KNOW WAY THE GUY USING THE LINCOLN,HAS A GIRL FRIEND OR WIFE,NO WAY.HE NEVER GETS TO THE POINT.IS THIS THE WAY HE IS WITH WOMEN,IN THE SACK,HE DOESN'T GET TO THE POINT,JUST KEEPS ON TALKING.
The Lincon is off set.
Music is too loud to hear people's introductions.
Eliminating Lincoln!!!!! Miller will always rule!!!! Miller is the best!!!!!
키가 커서 일하기 힘 들겠네요
Run uphill......
That’s a Pro. Not a PipePro
2nd 😁👍
Cnc machinist>>welders
First
its only gay if you're electrodes touch!!