I live in the UK, if you carry anything other than a Swiss army knife here, you're probably looking at seven to ten years in prison. I love the options you guys have over there in the USA.
I had a bugout and understanding it’s intended use it still just felt too flimsy to me to keep. I do however have several Paramilitary’s in different steels and I feel for me it’s a better general EDC carry. Enjoying your content. I am looking forward to the release of the new Military 2. Thanks. 🇺🇸
@roccoisfat3184 honestly I like the pm2 compared to most but I have been carrying a very axon Fram lock I love bow in m390 check them out vero engineering also the benchmade stock can't compete with spyderco pm2 at all its so flimsy but I do like my benchmade adamas full size so I do have some benchmade folders still but yea the pm2 better.
I purchased a Military 2 CruCarta and I have to say it is possibly the best mass production knife that I have ever used - just my opinion so if anyone else doesn't agree that is fine it's just my opinion and I've had many spider code benchmade Cold steel Kershaw and other mass produce knives
This is a year late but I don’t think you need to worry about the minor blade play off the Axis. The lock is a solid design and will be more than enough for 99.9% of tasks. I’m I big fan of this system 💪
Very informative! I ordered the Benchmade bugout after watching your video. Can’t wait for it to come to the mail. Next in line will be either the Benchmade bailout or the para 3 S45VN DLC w/ G10 scales. I’m still torn between the two..😕 any advice??
@nasseral-nazer4445 thanks for the comment man I had alot of enjoyment from the bugout my new lightweight favorite though is actually the spyderco k390 endela 4
I bought the exact same PM 2 a few months ago. I love it. If you want more brown on the micarta spray some mineral oil on it. I reckon Benchmade knives are overpriced. The best "axis" locks aren't made by Benchmade. I have the SOG XR Terminus with a flipper and makes it a great fidget knife. If I want another "axis" I would get a Hogue Deka. My favorite EDC knife is a TRC K-1s with an Ulticlip inside my pocket.
@@VernonSherrod-m2t cool I'm glad you agree because you can't put up a knife with cruwear VS a benchmade s30v it's just not gonna work. I think s30v is a steel of the past and spyderco keeps using s30v on some of the new models I'd stay away from it. Spyderco does this with first runs of there knives waits till everyone gets one then bumps up the steel to a super steel. So what I'm saying always wait on spyderco because they do this on purpose. They know s30v is a thing of the past and they shouldn't sell it anymore. If anything they should start off the new models with s45vn not s30v its ridiculous imo.
I have a Para 3 and a Bugout. The Bugout is lighter and slices tomatoes better. Otherwise, I prefer the Para 3. The flimsy handle on the Bugout is very disappointing. It’s why I’m selling the Bugout.
I hate carrying folders too. Fixed blades make feel ready for anything. I carry a white river m1 daily
I live in the UK, if you carry anything other than a Swiss army knife here, you're probably looking at seven to ten years in prison.
I love the options you guys have over there in the USA.
Meanwhile me walking around in public with my sidearm and otf switchblade.
@@Bumblesnitchyes.
I had a bugout and understanding it’s intended use it still just felt too flimsy to me to keep. I do however have several Paramilitary’s in different steels and I feel for me it’s a better general EDC carry. Enjoying your content. I am looking forward to the release of the new Military 2. Thanks. 🇺🇸
thanks a lot for your comments man i appreciate that. i have probably 6 PM 2s i love them too i carry one daily.
@@HeavySetTactical409would u say u like the pm2 more than the bugout or any other Benchmades??
@roccoisfat3184 honestly I like the pm2 compared to most but I have been carrying a very axon Fram lock I love bow in m390 check them out vero engineering also the benchmade stock can't compete with spyderco pm2 at all its so flimsy but I do like my benchmade adamas full size so I do have some benchmade folders still but yea the pm2 better.
I haven’t done anything too the edge yet 🤔 “I’ve sharpened it up too 1000 grit 🙈🤷♂️
Spyderco Military 2 CruCarta is the only thing I will ever carry. Why get anything else ?
I purchased a Military 2 CruCarta and I have to say it is possibly the best mass production knife that I have ever used - just my opinion so if anyone else doesn't agree that is fine it's just my opinion and I've had many spider code benchmade Cold steel Kershaw and other mass produce knives
7:27 *compression lock*
This is a year late but I don’t think you need to worry about the minor blade play off the Axis. The lock is a solid design and will be more than enough for 99.9% of tasks. I’m I big fan of this system 💪
Just bought a pm2 crucarta ….but my ranger green bugout makes the cut EVERY SINGLE DAY!
Compression lock not axis 👍🏻
Access not axis
@@yotamonster Wrong 🙋♂️
@@DuhYaThink I was being facetious
S30v. No N . 👍🏻
My knife is a tool, not a toy. Agree 💯
Mine is a toy too, I play with it all the time
Very informative! I ordered the Benchmade bugout after watching your video. Can’t wait for it to come to the mail. Next in line will be either the Benchmade bailout or the para 3 S45VN DLC w/ G10 scales. I’m still torn between the two..😕 any advice??
@nasseral-nazer4445 thanks for the comment man I had alot of enjoyment from the bugout my new lightweight favorite though is actually the spyderco k390 endela 4
Mine came same way sharp doesn't describe it well enough lol great knife.
@@southside1975 right
Dude, that tip down carry is killing me. I own both, and PM2 wins....
I bought the exact same PM 2 a few months ago. I love it. If you want more brown on the micarta spray some mineral oil on it.
I reckon Benchmade knives are overpriced. The best "axis" locks aren't made by Benchmade. I have the SOG XR Terminus with a flipper and makes it a great fidget knife. If I want another "axis" I would get a Hogue Deka.
My favorite EDC knife is a TRC K-1s with an Ulticlip inside my pocket.
Dude i just got the apocolypse doing a video next weekend probably on it i love TRC
Dead on truth
Bugout is great
No comparison pm2 cruwear blows bugout away
100% agree
@@VernonSherrod-m2t cool I'm glad you agree because you can't put up a knife with cruwear VS a benchmade s30v it's just not gonna work. I think s30v is a steel of the past and spyderco keeps using s30v on some of the new models I'd stay away from it. Spyderco does this with first runs of there knives waits till everyone gets one then bumps up the steel to a super steel. So what I'm saying always wait on spyderco because they do this on purpose. They know s30v is a thing of the past and they shouldn't sell it anymore. If anything they should start off the new models with s45vn not s30v its ridiculous imo.
I have a Para 3 and a Bugout. The Bugout is lighter and slices tomatoes better. Otherwise, I prefer the Para 3. The flimsy handle on the Bugout is very disappointing. It’s why I’m selling the Bugout.
Bugout is so over priced just like all Benchmade knive. This is a nice knive for 100.00 but not for 160. dollars
Pinky ring can't trust ya, jk.. lol maybe its a wedding ring?
Gotta love Americans.... "it has METAL liners" ...G, thanks. Metal is a broad term. Mercury is metal as well...
Its all context. Obviously he's not talking about mercury dummy
I'm American and I don't say "metal" like it's a single thing.