I've got the same problem. Now that I see the sending unit it makes perfect sense why this is happening again to my tractor. Ill take the dash off and try to get the sending unit out without taking the tank out. Once out I'll vacuum the sludge out then replace the sending unit with a stainless steel version. Your video was super helpful and helped me diagnose my problem.
Just did my Kabota BX 24. Sending unit was rusted and that’s what was causing the tank to plug up. Kabota wanted 152 bucks for a new one. I just cleaned mine up put it back in.
Great video saved me a lot of head scratching. I have a 2018 L3301 with @ 500 hours-same problem. I'm going to try a boroscope and check the tank and sending unit. I will probably pump the tank out or shop vac it. Too bad the outlet of the tank isn't big enough to let stuff through to get caught in the first filter/water separator! Good reminder to start with the basics -my water separator was "full" of fuel so I assumed it was coming in from the tank but nope!
I have the same issue on my BX2350. I tossed the rusty sender and installed a cheapy sender from Amazon to cover up the hole, the gauge isn't accurate but I won't keep getting rust and fuel starvation any longer! I refuse to pay Kubota $134 for a new replacement. It should be a recall for all Kubota's and the part should be covered lol . Funny thing is I just bought it used from a Dealer they should have replaced it for free as a maintenance thing. Oh well live and learn.
Was the fuel gauge working at all? I'm tempted to just pull the sending unit out first and have a look. (Different machine L47 but still kubota) I really think I may have the same issue because this machine has about the same amount hours 500ish and it's a 2016. So in my mind that means it was sitting for long periods before I bought it. Plus on top of that the guy I bought it from lives in an area that gets a lot of rain. The thing is the fuel gauge is working just fine? Not excited about this at all as I have a full tank of fuel. Anyway thanks for doing a video on this.
I think if I was to need to do this for my L3901, I’d try a clean pipe taped to the shop vac as a way of removing all the rust without having to fully remove the tank… knock on wood I won’t have to, I was looking for info about the fuel grommet I’m supposed to replace per my 2 year service schedule… Good luck!
I was about to try using a shop vac but some people say there is a very slight danger of fire because of the electric motor. I bet it would be fine though.
Loved your video - cringed at how many layers have to be pulled out to access tank - further cringed when i saw the corrosion on the sending unit - cringed even further when you said it was a 2015 with 500 hours. I have a 2016 L3901 (i purchased new) - have a large lot, so used for snow removal and moving dirt, stone etc. It defintely is not used every day - it has 120hrs on it. It is experiencing the stalling - and I have isolated it to the tank. I would bet that if I took the snding unit out (as you did), i'm gonna find the same dam thing. Agree that this is a totally bad design - used stainless steel versus the cheap steel. I would suggest that owners kep the tank full at all times - this won'🙄t allow for as much corrision. I'm gonna speak with my dealer, to see if this is a known issue - maybe Kubota should pony up for some of the repair. Still love my Kubota..... Thanks again
Ya, the dealer where I bought mine paid for a new sending unit after I showed them how bad it looked. I believe this would not happen if the tank was full while the tractor sits for months at a time. It wasn’t too bad of a job. It would have been better if it wasn’t raining 😖
Quite interesting a tractor that appears to be new has problems with crap in the fuel tank.. might want to check what you're fueling it up with.. when you're done with that
Here’s the story, it’s a 2015 model with only 500 hours on it so I imagine it spent long periods of time sitting in a barn. It had lots of time for condensation in the tank to rust the sending unit. I would think at if the tractor was used more the fuel would keep the sending unit coated and not allow it to rust. That’s my theory.
My goodness how awful to have that sending unit so Rusty! But will it only be the newer Kubotas which have a sending unit in the tank? I have a 2007 Kubota. I do not want to have to drop the tank. I drained the fuel and I bought a little cell phone camera Borescope and I was going to stick it down in the tank and see if I can see if there's any junk down there. If there is, I was thinking to Shop-Vac it out.
I was about to try a shop vac but decided to go with the tank removal. Just be careful because the shop vac motor can make sparks. There are videos about it I believe.
@@gooutside6055 thank you. Ended up just repeatedly sluicing out the tank with fresh diesel, blowing the lower fuel line repeatedly, got out about ten bumblebees must have been from previous owner could have left cap off tank
I have a 2021 l3301 i bought brand new and need help with it. Getting plenty of fuel but wint fire no matter what. Cranks strong. Getting fuel to injectors. Just will not hit and start. Only 300 hours. No codes. Babied machine. All light work so far and hasnt started in a week. Super annoying and kubota says its a month plus wait once dropped off and if the injectors are bad then it could be a 4500$ bill even tho its insured and warrantied through these con artists.
@@shanery122088 ,,, my first thought is that one of the safety switches is not working properly. I had this happen with two different tractors. One was under the seat and the other was a sensor that went into the rear end . I think it had to do with if it was in gear or not.
@gooutside6055 I wish that was the case but my tractor doesn't have any sensors that would only allow it to crank and not start. If the sensor was bad it wouldn't crank. According to the kubota techs
Sorry you're having that problem I'm afraid to take mine to the dealer too. Have you checked that the fuel pours out of the tank as seen in this video? There might be fuel at the injectors but they won't fire if there's not enough pressure. Its a common rail diesel so you don't have to open the injector lines like old diesels to bleed and it can be dangerous!
I've got the same problem. Now that I see the sending unit it makes perfect sense why this is happening again to my tractor. Ill take the dash off and try to get the sending unit out without taking the tank out. Once out I'll vacuum the sludge out then replace the sending unit with a stainless steel version. Your video was super helpful and helped me diagnose my problem.
@@lhoward1563 ,,, I’m glad it helped,
Just did my Kabota BX 24. Sending unit was rusted and that’s what was causing the tank to plug up. Kabota wanted 152 bucks for a new one. I just cleaned mine up put it back in.
Mine has been running great since I did this.
Great video saved me a lot of head scratching. I have a 2018 L3301 with @ 500 hours-same problem. I'm going to try a boroscope and check the tank and sending unit. I will probably pump the tank out or shop vac it. Too bad the outlet of the tank isn't big enough to let stuff through to get caught in the first filter/water separator!
Good reminder to start with the basics -my water separator was "full" of fuel so I assumed it was coming in from the tank but nope!
Thank you. I have exactly this problem. Not excited to take out the tank
Yep, it takes a little time but it’s not too bad.
Cut a 4 inch hole in mine and cleaned it out, put a 4 inch Oakley test plug for abs plumbing pipe.
@@PatRiley-j1m Excellent idea! Where did you put the hole exactly? Do you think the rubber plug will hold up to diesel over time?
I have the same issue on my BX2350.
I tossed the rusty sender and installed a cheapy sender from Amazon to cover up the hole, the gauge isn't accurate but I won't keep getting rust and fuel starvation any longer!
I refuse to pay Kubota $134 for a new replacement. It should be a recall for all Kubota's and the part should be covered lol .
Funny thing is I just bought it used from a Dealer they should have replaced it for free as a maintenance thing. Oh well live and learn.
So we both had the same situation.
"Mr. Funnel" is the answer to avoiding many such issues.
Ok, not sure how that will get the chunks of rust out
Was the fuel gauge working at all? I'm tempted to just pull the sending unit out first and have a look. (Different machine L47 but still kubota) I really think I may have the same issue because this machine has about the same amount hours 500ish and it's a 2016. So in my mind that means it was sitting for long periods before I bought it. Plus on top of that the guy I bought it from lives in an area that gets a lot of rain. The thing is the fuel gauge is working just fine? Not excited about this at all as I have a full tank of fuel. Anyway thanks for doing a video on this.
I always take lots of pictures with my phone because I can never remember how things went when I'm putting stuff back together.
Thank you. excellent video. I have some debris in my tank Now to remove the tank. I’m not looking forward to that.
It wasn’t too bad if you have all your tools in a nice spot. Mine has been running great ever since I cleaned it out.
I think if I was to need to do this for my L3901, I’d try a clean pipe taped to the shop vac as a way of removing all the rust without having to fully remove the tank… knock on wood I won’t have to, I was looking for info about the fuel grommet I’m supposed to replace per my 2 year service schedule…
Good luck!
I was about to try using a shop vac but some people say there is a very slight danger of fire because of the electric motor. I bet it would be fine though.
Loved your video - cringed at how many layers have to be pulled out to access tank - further cringed when i saw the corrosion on the sending unit - cringed even further when you said it was a 2015 with 500 hours. I have a 2016 L3901 (i purchased new) - have a large lot, so used for snow removal and moving dirt, stone etc. It defintely is not used every day - it has 120hrs on it. It is experiencing the stalling - and I have isolated it to the tank. I would bet that if I took the snding unit out (as you did), i'm gonna find the same dam thing.
Agree that this is a totally bad design - used stainless steel versus the cheap steel. I would suggest that owners kep the tank full at all times - this won'🙄t allow for as much corrision.
I'm gonna speak with my dealer, to see if this is a known issue - maybe Kubota should pony up for some of the repair.
Still love my Kubota.....
Thanks again
Ya, the dealer where I bought mine paid for a new sending unit after I showed them how bad it looked.
I believe this would not happen if the tank was full while the tractor sits for months at a time. It wasn’t too bad of a job. It would have been better if it wasn’t raining 😖
I’m having to do that stupid Regen on mine right now. Nobody got time for that !!!
Quite interesting a tractor that appears to be new has problems with crap in the fuel tank.. might want to check what you're fueling it up with.. when you're done with that
Here’s the story, it’s a 2015 model with only 500 hours on it so I imagine it spent long periods of time sitting in a barn. It had lots of time for condensation in the tank to rust the sending unit. I would think at if the tractor was used more the fuel would keep the sending unit coated and not allow it to rust. That’s my theory.
@@gooutside6055 actually if diesel fuel sits to long it grows algae.. run an excavator once that had that same problem
@@thegreatnorthwoodswithbb2863 ,,,, yes I’ve heard of that too
My goodness how awful to have that sending unit so Rusty!
But will it only be the newer Kubotas which have a sending unit in the tank?
I have a 2007 Kubota. I do not want to have to drop the tank.
I drained the fuel and I bought a little cell phone camera Borescope and I was going to stick it down in the tank and see if I can see if there's any junk down there.
If there is, I was thinking to Shop-Vac it out.
I was about to try a shop vac but decided to go with the tank removal. Just be careful because the shop vac motor can make sparks. There are videos about it I believe.
@@gooutside6055 thank you.
Ended up just repeatedly sluicing out the tank with fresh diesel, blowing the lower fuel line repeatedly, got out about ten bumblebees must have been from previous owner could have left cap off tank
I have a 2021 l3301 i bought brand new and need help with it. Getting plenty of fuel but wint fire no matter what.
Cranks strong. Getting fuel to injectors. Just will not hit and start. Only 300 hours. No codes. Babied machine. All light work so far and hasnt started in a week. Super annoying and kubota says its a month plus wait once dropped off and if the injectors are bad then it could be a 4500$ bill even tho its insured and warrantied through these con artists.
@@shanery122088 ,,, my first thought is that one of the safety switches is not working properly. I had this happen with two different tractors. One was under the seat and the other was a sensor that went into the rear end . I think it had to do with if it was in gear or not.
@gooutside6055 I wish that was the case but my tractor doesn't have any sensors that would only allow it to crank and not start. If the sensor was bad it wouldn't crank. According to the kubota techs
Sorry you're having that problem I'm afraid to take mine to the dealer too. Have you checked that the fuel pours out of the tank as seen in this video?
There might be fuel at the injectors but they won't fire if there's not enough pressure. Its a common rail diesel so you don't have to open the injector lines like old diesels to bleed and it can be dangerous!
Fuel shut off solenoid
wow
Ya, it was a lot of rust.