Ford Focus Check Engine Light Code P144A (Evap Purge Valve)
HTML-код
- Опубликовано: 29 апр 2018
- If you would like to leave a donation here is a link ...
www.paypal.com/cgi-bin/webscr... Today Im working my 2013 Ford Focus with the CEL Clode P144A (evap purge valve)
Ford Part Number
BV6Z-9D289-R
IF YOU HAVE ANY QUESTIONS JUST ASK!
here is the part from amazon
amzn.to/2xhcDka
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
If you would like to leave a donation here is a link ...
www.paypal.com/cgi-bin/webscr...
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ falcons_shop
Garage's Facebook
/ falcons-performance-an...
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage - Авто/Мото
here is the part from amazon
amzn.to/2xhcDka
Falcon's Garage Thank you for that link. I appreciate your help very much. I will let you know the outcome for sure. You've been extremely helpful
Glad I can help!
Would that part cause the car to build up pressure in the tank when doing hard turns or hard stops? I get error code that says evap emission system has small leak.
Boss!
not all hero's wear capes but alot sure do work in a garage, thank you sir!
You're welcome!
Ford was trying to charge me $200 for diagnostic, $200 for parts, and $200 for labor for popping a P144C which is Canister Purge Control Valve, yeah I'm gonna tackle this one on my own. I appreciate you man you stopped me from getting scammed. Money's tight for me I don't make a lot being in the military so I appreciate you doing what you can to help people who don't know a lot about cars. My 2016 Focus ST will be back on the road soon!
Thanks man. It fixed my issue and took me 5 minutes to install with just a screw driver to loosen the safety clips. Went and filled up and drove from Houston to Minneapolis (1200 miles) no more stalling after fill ups and rough idle
Thank god I’m not the only one who was stalling after gas because of it
@@gothsato same thing is happening to me right now. And it stalled out on the road once also. Gotta replace this part asap
Yo thank you
**Update** My 2012 focus SE is still running great after replacing the evap sensor over a year ago.
Oh shit so THATS what’s causing my car stalling and weird idling??
Thanks for the Awesome step by step instructions! 30 Min and I’m back on the road!
Ford dealer wanted $430! I bought a genuine Ford part for $25 and followed your instructions! Thank you!!!
Glad I could help you save some money!
What a rip off my ford dealer charged 190 and I still did it myself
Thank you Falcon. I changed my Purge valve yesterday and it solved my High Idle problem. I followed your directions exactly and I was done in 15 minutes!!! Thank you. My new one came with different clips but was a breeze to install. Thanks again. I will continue to follow you and share your guidance
Awesome!
Glad I could help
Had Ford do it today, part was 42 labour was 43 it worked I can fill up now and it doesn't die. Thanks for this video would have done it myself but didn't wanna mess anything up lol
Finally got the check engine light for this today in my 2012. Thanks for the video, super helpful and straight to the point.
Best video on replacing 2013 Ford Focus purge valve I've seen. Thanks!!
Glad it helped
My car stoped today and it smelled like gas and it was shaking you think this could be it it would shake in yhe low rpms
awesome video. much appreciated. I'll be using this when i get my part
Thank you for this helped me save so much money instead of going into the shop keep on making these videos!
Great explanation of the disconnect mechanisms. Even though the new part ships with a new metal bracket, I found once the hose portion was disconnected, I could just slide the old rubber and hose assembly off and slide the new rubber and hose assembly on. No replacement of the bracket necessary (though you might want to anyway for appearance sake)
Helpful. Thanks for the great video!
Very helpful video, it walked me through exactly what I needed to do. Thanks!
Great to hear!
Huge thank you sir! Very informative!
Thanks bro, well explained, straight to the point, you win 1 more subscriber.
Awesome explanation and walkthrough. Really appreciate it! :D
Glad it helped!
Not as easy as you made it sound but video really helped. Thank you!
Glad it helped!
Great video, thanks!
Great explanation awesome job. Thank you so very much.
Glad it was helpful!
Big help thank you.
Thanks for the help.
Glad I could help!
great video... now my daughter can get tags for her car (have stupid emissions testing here).
Awesome!
So easy thank you so much bro 🙏🏽☺️
Happy to help
Thanks man I just fixed my brothers car 🚗 just subbed to you
Come fix mine ! lol
@@kellyanncurran9868 lol be more then happy too 😄
You the Man!!
Appreciate it boss 💪🏽
Any time
Thank you so much! 😊
You're welcome 😊
Outstanding video. Thank you. I suspect this is my problem. After I fill up the gas tank, my idle RPM's stumble from 800 down to 600. It hasn't stalled or put up a code yet and seems to recover after I drive for a few miles. I order the item and replace it. Thanks again.
Good luck with the repair
The failed purge valve ruined the catalytic converter in my car. Thank goodness for the Ford ESP I bought.
The fact that Ford Canada refused to pay out a catalytic converter for another customer with a purge valve failure is shocking. My Focus used to backfire going down hills.
I will never buy another Ford.
I swear it's videos like these that make me look like a bad ass in front of my wife. Thank you!
lol
RECALL issued!! RECALL issued by Ford today 10/25/18!! FINALLY!!!!!! All 2012-2018 Focus. Call your dealer!
yal100 is this real? My light comes on and after 3 or so starts and at 15 mins of driving it goes off again.
Its real. They say they are sending out recall notices later in november and december. Don't call your dealer, best bet is to call Ford corporate 1 (800) 392-3673 and have your VIN number ready.
Got my recall notice today. I've been complaining about it making noise for over a year and they claimed they couldn't replace it under my extended Ford warranty unless the code came up. Well they're going to replace it now!
Awesome. Glad the notice finally came for you. I cant believe its taken Ford 6 years to recall this clearly major problem. Every mechanic knows about this problem. Way to keep those customers coming in the future Ford, unbelievable!
do all fords have warranty
@@kellyccc
I got the same problem but with my 2017 ford focus se
Same dude
i have 2016 ff se is it different than 2017?
I just replaced this part in my vehicle and when I turned it on for the first time it started up soooo smooth. Thank you!! Now I have a new problem, it says my fuel tank is empty (It's not), which cable or tube did I most likely not connect back properly??
this part really dont have anything to do with that .. you might have a fuel level sensor issue
I have a 2016 Ford Edge Sport 2.7L and the CEL just came on today...P144A. I am reading mixed reviews online and just came across your video. Should I bank on the light going off by replacing my purge valve or could it be something else? No problems with idling, startup, stalls, etc.. Runs great except that the CEL is on.
should never bank on just replacing this part ..I would do a leak test before anything ... is this most likely the issue yes .. but I would say make some test first
Hello, my 2016 focus just had this code come up. Thanks for the video very helpful. I replaced the solenoid so If I don’t have an odb how do I reset the engine light or how soon after will it turn off by itself. Thanks for any reply
you can disconnect the bateery for a couple of minutes .. that should reset the computer
Thank you for your video. You are the first one to mention the solenoid. Is it possible to just replace the solenoid if the tubing is still good?
They don’t sell it separately.
@@FalconsGarage Thanks for replying. Bought the the part and it fixed my idle problem. Your video saved me a lot of money. 56 dollars for the part. Very easy to instal. Thanks a million!!
Hey Falcon I saw that there is an electrical connector that plugs into purge valve in the middle of it. Is it possible for that to go bad and be the reason for code P0443 on a 2012 Focus? Wondering if I need to test that or just go ahead and buy the Evap Purge Valve to fix P0443. Thanks for the informative video!
Could it be a bad connector? ... yes I’ve seen it happen plenty of times to ford/chevy connectors. But never seen it on this sensor. But it is a possibility.
@@FalconsGarage Just checked out the car today and turns out the connector's wire somehow got completely cut near the connector. Hopefully that's the only reason it isn't working lol
Nice find!
I’m not having any problems with my engine other than a check engine turning on. Took it to a mechanic and he said it was the evap valve. Will this affect my smog check?
Monica Chavez with the check engine light on most places won’t pass the state inspection witch is part of the smog test
I got the same code on my 1998 Mustang GT. To save money should I try and replace myself (no experience, will get parts/tools) or just take it into a shop?
darthjohn0 it all depends of where the purge solenoid is on that car. I can’t remember where is at on that mustang but on older fords they usually have it by the firewall.
You should be able to do it yourself. I am mechanically inclined and try to do as much as I can by myself. I save a lot of money that way. Plus you can find directions here on RUclips
You should be able to do it yourself. I am mechanically inclined and try to do as much as I can by myself. I save a lot of money that way. Plus you can find directions here on RUclips
Mike Manley thanks man, I'm gonna pick up the part tomorrow and install myself.
What about in a 2014 Ford fiesta. Car roughly idles after pumping gas. Can you show me? Thank you
I have a 2016 mustang ecoboost, 2.3 L 4 cylinder, I recently got the code P144A as well as several others like P1450. Do you think replacing the evap valve would fix my codes as well? Or at least a good place to start?
good place to start
Thanks for the video... el the check engine light turn off by itself after replacing it? Or do I need to clear the code? 2014 focus
it should turn off AFTER driving the car for about 60-100 miles ... so its best to clear the code with as canner
Mine turned off immediately! 2015 ff
Hubby and i replaced this. He has a broke hand so i could change it easily
I took my 2013 Focus Manual Trans to the dealership to perform recall 18S32. They replaced this part and re-flashed my PCM, and now I'm getting code P2227. Wondering if the part they put on just happened to be faulty or if I have a bad MAP sensor. Trying to figure it out without having the dealer replace my PCM for $1000.
well they would need to test it out .. they should not just replace it with out testing
How much would it be if I took it to a mechanic for that same part to be replaced cause I already bought it 🤔
maybe between $50-$100 depending on the mechanic
Después que le cambias esa válvula a un carro, cuánto tiempo debo de correr el carro para poder hacerle el emicion test?
What made you replace it? What were your fuel trims before and after replacement. Did the code come back?
The check engine light code. That’s why I replaced it. This is a very common issue with this cars it even has a recall on it.
@@FalconsGarage I agree with you on that. I replaced the purge valve on my wife's escape lol. P1450 code
@@FalconsGarage is the 2013 and 15 all the same gen
So its the same location
Would a faulty purge valve cause the engine to idle high. When it idles high and I put it in neutral it idles back to normal. I ordered a purge valve and it's on its way. I hope it solves my problem!! Thanks for the video
it could be because it might suck in too much air into the intake, are you getting anymore codes besides that one?
Falcon's Garage Thank you very much. I'm going to work on my car today and this coming week. I'll let you know how I make out!
Thanks again Falcon. You are a Huge Help!!
Mike Manley I changed my purge valve and it solved every code I had. It was reading emissions code and that went away too. Much appreciated Falcon!!
Is this what I need to be replacing on my 2014 Focus that stalls when starting after filling up with gad?
*gas
I believe so, same problem here
@@brawley051679 I have the exact same issue. Did you do this and did it work for you?
Somebody told me there is a new version of the ford focus 2012 Evap Purge Valve. Is that true?? where can i buy this new version??
there was a recall on this issued on 10/22/18... Call your local dealer and see if your car applies
My engine light JUST turned on as I was driving home, as I accelerated, the car would go faster then it would pause and brake a little on its own, making the car go slow then fast. Would replacing this part from your video fix my car you think?
I wouldn't automatically think of this part .. but it does sounds like you have a issue .. any codes?
@@FalconsGarage Mine does the same thing as his along with my gas tank just going down way to quickly. But no codes are showing up according to Ford and since my car didn’t do anything for them they don’t see a problem. Do you think this could be the issue? I’ll do it myself if need be. Thank you
Hey. Man. Great video. But i have a. Question. After I fix that. My tank. Keep getting air and. Keep cutting. Off. After I put gas. In it. Is any way I can fix that
could you explain that again please..
Yes mine does the same thing when I stop to get fuel and fill my tank the car seems like it doesn't want to to start or start and stalls immeaditlly. Then it restarts and idles roughly. This only happens when I stop to fill my tank.
There’s a recall for that!! Same problem here
Does this work for 2015 model ? I have the same code. And the engine layout looks the same .
i believe its the same
Ok I'm having issues with my 2017 focus se ... it started out with a code and they told me to replace the 02 sensor and also it runs out of gas at 1/2 a tank ... I filled it up and noticed it stayed full for atleast 3 days before the gas gauge started to drop. I dont recall what code it was either, but the purge valve .. would it make this type of issue happen.
Nope. Sounds like you have a bad fuel level sensor ...
Is that something easy to fix or does the tank have to be removed
Could this cause a strong gas smell? I have that on my 2016 Focus. No idea yet. Seems like it's coming from under the car but I'm not sure.
yes BUT not enough to smell it from inside the cabin ..
One question, i have a ford focus titanium, and have this code, my remote start not working. Changing this part may solve the problem?
on this focus the remote start wont work if it senses something wrong with the car .. like Check engine light or something like that ... so fix the light first and go from there
Have you heard of issues with a ticking sound, what part to fix?
havent had any issues like that
That's this same valve. It cycles on and off with that noise. Fixed some issues I had with the idle and fueling according to my scan tool.
@@jasonashley9853 I was getting the same code and I had a clicking noise also, I just disconnected and put it back on and the Engine code went away. Is been about a week and it has not come back up. Do you thing I should still change it?
I received my part I replaced it I took off the check engine light with my scanner and it's still showing that I'm getting poor fuel economy is there any reset I have to do for the fuel display? Thank you in advance
No. Those are your driving habits. You need to drive it more and balance out the averages. You can always reset your fuel economy gage.
I replaced and my car is running fine now, but my check engine light is still on. Is this a code I need to get the engine light reset or should it just disappear?
you need to reset it
@@FalconsGarage how do you reset it?
@@studiou6816 You can disconnect the battery, that's the fastest way. You will lose any radio pre-sets and trip mileage.
Had my engine light come up the other day and got the code scanned and came up as P144A, (2015 Focus w/1.0L manual) think this would fix the code? I don’t notice much difference in driving.
could this be the issue? yes its a possibility
I have the 1.0L EB manual focus also. I haven't noticed a issue with the run quality with this code. Think I can clean and replace and the code will go away?
These cars suck so much and my local dealerships have refused to do the warranty work, and Ford said they don't have to.
I hear you!
Would this explain my car feeling down on power after a fillup?
could be also check fuel filter
My car starts way easier with full gas tank, if
it's half or 1/4 it cranks a considerably longer time than with full
tank (like 2-3 seconds no matter hot or cold). It's still not bad but it
annoys me a little. I have 1.6 ecoboost engine. Could it be this evap
valve? No engine lights or errors.
I would check into fuel pressures ...I don't think this sensor is your issue .. but there is more testing that needs to be done,
@@FalconsGarage I checked them already, they are within manufacturer specs. I have new HP pump (on old one was the same) and I suspect the low pressure fuel pump in tank
could be.
So is it safe to drive around with this issue? My check engine light came one this is the issue and I can’t get my car in the shop until a week out.
safe .. well thought question ... most "likely" it will be ok .. but you never know!
My engine has a bad hesitation On take off sometimes it idles rough And wants to die at stop lights and when I fill up my tank to started I have to hit the gas full throttle only when I 1st fill it up For it to start I have a check engine light on and the only code it's pulling up is the purge valve I'm wondering if the purge valve can make this happen
I could be possible
My aunts is doing the same but it's a 2014 ima replace the purge valve today let u know
@@dannymartinez4816 I already change the purge valve and it did not stop the problem now and I have a cylinder 4 misfire
@@thomasgiovengo6059 did you ever figure out the solution to your problem of hesitation on take off? My brother's car is doing. Any information would be greatly appreciated.
@@adrpals2324 no I never did I sent Car back to the place I got it from They said they was going to fix it and they made it worse The transmission went out on the way bringing it back to them
Hi sir. Have a 2013 Ford Focus se code says p1450. Car is hard to start after filling but thing runs and starts great should I replace purge valve first then if problem continue look farther
if the part is bad i would say replace it
is this compatible with ford focus 2012 ? I have the same error code. Thanks
yes, they should be exactly the same
Falcon's Garage thanks I will try
Yes it is compatible
Thanks, I already changed and issue was solved.
:)
Have the same code on a 2.0L ecoboost in a 2016 Ford Fusion, is it the same setup?
not sure if the sensor is in the same spot ... but they all have this sensor
Did you get this fixed? I’m having issues with my fusion as well. How long did you drive it with this issue and were you experiencing any problems? do you know where it’s located ?
Cristian Deltoro with my 2016 I actually didn’t end up changing any parts. I was going to but then I had to accelerate fast to get past a jerk who sped up after I went to pass him and the next day the code was gone. I hadn’t had any mpg degradation before that either
anyone know what that 3/8 tube is. mine snapped while changing out evap. it seems like a vent tube it's on the same clip as the line that goes from the air intake to the back of the engine near fire wall.
It's the tranny vent tube. Not connected to anything
2016 focus 2.0 ltr- have you ever seen where the engine shuts down on the road while driving? I will replace this purge valve again.
It shuts down and I can pull over and let it sit for a few minutes and it restarts no problems and runs fine after.
to me that sounds like a fuel pump going bad
@@FalconsGarage Thanks for the response!
I watched a video of this guy removing the battery on his focus he disconnected the c90 cable in his fuse box when I did the same thing my focus will now not start or crank or anything is there something I can do without replacing the computer or having my focus towed to the dealership???
well you need to check WHY is not turning on, fuel, spark , key got erased .. could be many things
I have a focus 2014 se, it doesn't have a code, but when I accelerate after stopping, after driving for a while, the car starts jerking on the initial acceleration only, and then drives normally... although it feels a little weak for a 2000 cc. could this be the problem?
I took it to Ford for the recall notice and they told me that since the fuel tank isn't deformed, there's nothing wrong with it.
damn
My ford has the same issue. I first took it in to the Ford Dealership when I began the lease, and they "Fixed" that issue (the problem started again a few weeks after). It was supposedly something with the transmission. I'm hoping it gets resolved after taking it in for this.
Let me know if it works!
Cirzy it won’t I’ve had my focus 2013 se for 5 years and it still shakes all the ford dealers just tell me that’s how the car is. I’ve taken it to get all the recalls and still nothing.
I got this code but autozone is saying it's the evap canister vent soleniod? so which is it?
In my experience is this valve... with out having somebody test them both .. that would be my best guess
hi i have a 2012 focus with the 1.6 ti-vct engine and manual, the car intermittently has a misfire/pop out of the intake between 1000-2000rpm when you apply 30% or more throttle, i have had the injectors flow tested, fuel pressure is 4bar, new spark plugs, new coil, no CEL, no codes on OBD scanner
not sure what kind of scanner you are using .. but you might need a scanner with a scope or a scanner that can measure small misfire .. sometimes a small misfire wont be cause the CEL to come on but if the scanner has a misfire counter .. it will show there ..
@@FalconsGarage i had it on a proper expensive scanner this weekend by a dyno tuner, he could only pick up a "lean condition"
I have a 2016 Ford Focus se is this the same because Ford is tryna charge me 800 dollars and I don’t have that type of money
could be
Any ideas when you fo all that and it throws the same code up?
wiring issue or a evap leak
Where is the vacuum monitored, that decides that this evap line has a problem?
I bought a vent solenoid, but I couldn't access the one by the gas tank, so I removed the engine-side line with the clips on each end. Didn't see anything obvious, so I put it all back together.
Now the engine light has cleared! What the heck did I do? And I thought the code would only clear if you hooked up the scanner.
the fuel tank pressure sensor ..but you are talking about a diferent sensor .. is that the code you had?
Is it the same part for a 2017?
My car wont start after I fuel it up. Do you think that's what it is? I have a 2013 ford focus se. I just replaced the fuel pump today and it still having the same problem. Does it sound like the purge valve?
is the engine getting fuel? is the fuel pump getting power? any check engine light?
@@FalconsGarage the check engine light is on and I replaced the fuel pump. My car only acts like that once I fill up. I believe I'm having the same problem that you had
@@FalconsGarage I'm back to tell you that it was my purge valve
I have a 2016 Ford focus st and it struggles to turn on, could this be a bad purge valve?
explain struggle
@@FalconsGarage Like it sounds like it's trying to turn on and it'll take a few tries to turn on. It's the sound when it first turns on but it extends, not sure if I explained that well
its a little hard to understand .. but if im understanding correctly it sounds like a fuel issue
@@FalconsGarage Hmm, this morning it threw me a code of P0600, idk if that helps
I have this issue when I let the fuel run under half and next time I fill up it cranks for about 4 seconds and then starts up, I have a 2014 Focus ST
I replaced that evap purge valve, but the engine light came back up. What else should I check, or change?
Did the same code come back up? Did you do a smoke test before replacing it? If not I would recommend doing one now. Also check the connector to that valve
Does this issue affect your ac or stop it from working?
No.
Would you by chance know the part number for the 1.0 ecoboost Ford Focus?
no sorry but if you call a dealer they might be able to help you
I have P0443 code . Does this the same problem. ? Because engine is loose power the same way. Thank you in advance
It should
What are the symptoms on that code?
this particular car didn't have any symptoms .. just a CEL
What causes that problem to happen in this model car ?
i would say maybe a faulty piece..
Tu hablas español si o si, escanee mi ford Focus 2014 y me sale la siguiente avería, P144A: 00-68 línea de valor de purga del sistema EVAP bloqueado/restringido, se arreglara cambiando lo del video? O puede ser algo más? Espero tu pronta respuesta
siempre puede ser also mas .. pero lo mas probable es que seal esa valvula
My buddies car is surging real bad after a few minutes of running taking code reader tomorrow morning any advice would be great
maybe a vacuum leak.. but need codes first
Pulled up the p144a code
im still thinking vacum leak
I put the new part on but when i shift it jerks foward hard in 1,2, 3rd gear.
TO ME it dosent sound related .. but it would have to be checked
What it call???
I did it accordingly, but my car doesn’t seem to run very smoothly. Like I cranked it up but it making wierd airy noise. Idk of that normal at first. Maybe it’s just a me problem. Maybe I did something wrong or they’re not secure enough. Idk 😭
there should be no "air sound" .. sounds like there is a leak somewhere
@@FalconsGarage I finally fixed it! Hahaha the problem was that one of clip thing was not plugged in all the way. My car is like new. Thank you so much 🥲
I replaced it but my engine light is still on , how do I re-set it ?
you can unplugg the battery for a buit or use a scanner to reset
@@FalconsGarage thank you , great video
I replaced this part and cel still pops up
When I replaced mine I used old bracket.
Is it possible that it could be clicking?
sticking?
@@FalconsGarageit is really weird. The piece started clicking rapidly and the check engine light came on. The check engine light didnt turn on today and it was no longer clicking. I could feel the vibration in the cylinder piece each time it clicked. I've only known of it being stuck open or closed but it felt like it was rapidly opening and closing like it was trying to reset but was stuck in a loop
We got the same error code then days later our car dies on us due to something with fuel getting to the engine. Could this be the problem and would replacing it maybe fix the problem
ive never seen this problem casing the engine to die
The Video Game Archive I’m having the same problem exactly, did you ever happen to get it fixed? If so how?
I’m getting a p1450 00 code
Will this fit a 2014 Ford Mustang 3.7 V6?
No. Those purge valves look different
@@FalconsGarage gotcha, I got error code P144A saying that the vapor line is restricted/blocked.