Creality Ender 3 V3 SE Part 2 THE FIX
HTML-код
- Опубликовано: 15 сен 2024
- Factory assembly error found and corrected, so now it works.
This is part 2 of the assembly and startup of this Creality Ender 3 V3 SE 3D printer.
This was NOT provided to me to demonstrate, nor is it sponsored in any way.
Where I bought it: amzn.to/3GP4MuW
Thank you for this video, it saved me alot of money and trouble. I had the same on my ender 3 V3 SE... Seems like there is some quality control issues.
I also 100% recommend getting a new quality SD card mine lasted only 2 prints and caved my machine in and it wouldn't turn back on had to turn it of over night before it came back to life 👍🇦🇺
I always use a name brand, higher end card for all of my projects to avoid issues like that.
I'm surprised the main board didn't blow up as there is a mixture of 24/12v and 5v on that cable. Having 24/12v fed into thermistor, limit switch or probe controls wouldn't be healthy.
Quite true.
I bought one of the same printers and i have had nothing but problems, printer only works one out of 20 prints getting the BLTError all the time. Updated the firmware and now its stuck in chinese
@@thomasandolf7365 Good luck with tech support!! Mine was in Chinese when I got it, but after some experimenting with the control pad (I don't read Chinese!), I was able to finally change it to English. Don't remember how. It was almost by accident............
@@thomasandolf7365 Is the "BLTouch error" the error that when you try to start a print, the print head initially seems like it's starting the print, but instead it stays in the middle and spins up the part cooling fan?
Days to get a reply? I'd love that, it's been months!!!!
Took about ten days
Strange. Mine just worked