Hello I have this fault on a plc micrologix 1400 : Major error s:6 = 2Bh. Me and 3 other colleagues have spent hours and hours trying to fix it and nothing works. The fault indicator flashes red. Every time we upload a program to the plc and we want to go to run mode it goes into fault. We have loaded a basic program and nothing works.
@@KletteTech ok I'll leave a comment on this thread. On Tuesday I'm travelling to a fault.they can still run their pumps in manual override. There is a fault light on the PLC. So I'm going to take a look and hopefully reset it... have not really had much to do with them.
Hello Klettetech I was trying to make a simple circuit on Rs Logic Micro that contain Three Inputs and One output. First input that will jog the machine second input will start the machine and will latch it and third input is for stop the machine. In first rung I put input Jog with Normally open contact and output. In second Rung I put input start with Normally open contact. And stop input with Normally close contact. And same output as first rung with same address. Now if I toggle bit of Jog it would not work however it is working in second rung as it should be. I also used the bits now it will jog but will not start the output in second rung. Can you please help me to solve this Problem. Thanks.
He is clear when he speaks and ready to rock and roll, I watched other videos and I can hardly understand what are they talking about.
Thanks
very nice tutorials. thank you sir.
You are most welcome
i love how he say's that he's ready to rock and roll :)
Very good explanation and easy to understand.
Glad it was helpful!
Thanks for your valuable information, I was facing same issue in last 3 months. I have seen this video and solved the issue. thankyou so much sir. 🙏
That is great. Awesome job
Specially help in night shift 😅👍👍👍 so true
Thanks a lot dear sir
Hi sir micrologix 1200 shown fault indication... how to solved this problem...
Thank you
Thank you great video
Glad it was helpful!
good videos
What is a program use for resetting?
Hello
I have this fault on a plc micrologix 1400 : Major error s:6 = 2Bh.
Me and 3 other colleagues have spent hours and hours trying to fix it and nothing works.
The fault indicator flashes red.
Every time we upload a program to the plc and we want to go to run mode it goes into fault. We have loaded a basic program and nothing works.
Awesome vid man!! Thanks for upload!
No problem!
my plc is only shown power led and input leds and not working
what to do?
how to fixed systembits error
Did u have to plug a cable into it to connect to it
It was networked through the ethernet.
@@KletteTech ok sorry but what does that mean? It it wireless
@@carlmarquardt994 We are using a cord to network through what is called the ethernet. It is always plugged in.
@@KletteTech ok I'll leave a comment on this thread. On Tuesday I'm travelling to a fault.they can still run their pumps in manual override. There is a fault light on the PLC. So I'm going to take a look and hopefully reset it... have not really had much to do with them.
Are you communicating with the PLC through ethernet?
Yes it is.
Can there be any other type of faults in PLC?
Yes. A lot
ruclips.net/video/gFzI2fjL_kU/видео.html
Hello i need need need
ruclips.net/video/gFzI2fjL_kU/видео.html
Taking a PLC class and really need to learn how to troubleshoot these controllers. Your videos rock! 🤘
Happy to help!
Hello Klettetech
I was trying to make a simple circuit on Rs Logic Micro that contain Three Inputs and One output. First input that will jog the machine second input will start the machine and will latch it and third input is for stop the machine.
In first rung I put input Jog with Normally open contact and output.
In second Rung I put input start with Normally open contact. And stop input with Normally close contact. And same output as first rung with same address.
Now if I toggle bit of Jog it would not work however it is working in second rung as it should be.
I also used the bits now it will jog but will not start the output in second rung. Can you please help me to solve this Problem.
Thanks.
I just filmed a video on this and will let you know when I post it. Give me a couple of day.
Ok Thanks a Lot.
Here you go. Hope this helps
ruclips.net/video/3dv-tmbcqEc/видео.html
Sir how to fix B&R X2X network fault
how to contact plc